6 February 2025 in IEEE Journal of Selected Topics in Quantum Electronics
The recent proliferation of artificial intelligence and machine learning applications relying on large language models is fueling unprecedented demand for compute capacity. Associated with this is a need to scale capacities of short-reach optical transceivers towards multiplex Terabit/s, while maintaining integration density (frontpanel or beachfront density) and energy efficiency (pJ/bit). One option to scale transceiver capacity is to increase the bandwidth per lane from today's 200G to 400G or even higher: coherent transceiver technology is then expected to play an ever more important role. Photonics and electronics with higher bandwidths beyond 100GHz will play a crucial role. Integration of thin-film LiNbO3 modulator onto a Silicon Photonics platform is shown to be a viable option to meet the needs for new generations of optical transceivers. Front-end electronics such as linear modulator drivers and transimpedance amplifiers can rely on traveling-wave design approaches to allow continued bandwidth scaling despite (relative) slowing transistor speeds. Novel wireline data converter architectures can be used to overcome limitations of existing implementations. Maintaining signal integrity from photonics and electronics can be facilitated using both 2.5D and 3D integration approaches. While the introduction of novel materials and architectures will require time to further mature, optical transceivers operating at baudrates up to and beyond 200Gbaud are now just beyond the horizon.
22 December 2023 in IEEE Transactions on Microwave Theory and Techniques
This article investigates a linear differential modulator driver for optical communication links beyond 120 GBd. The driver was implemented in a 55-nm SiGe BiCMOS technology with an $f_T$ / $f_{\text{MAX}}$ of 330/370 GHz, featuring a traveling wave output stage driven by a lumped variable gain amplifier (VGA) and a predriver. The fabricated IC achieved a maximum low-frequency gain of 21.8 dB with more than 10-dB gain control capability and a 3-dB bandwidth of over 70 GHz. Power measurement results show the driver is able to deliver a constant output swing of 3.56 Vppd while keeping the THD below 2%, with the differential input swing varying from 0.3 to 1.03 Vppd at 1 GHz. In the large-signal measurement, the chip delivered 72, 106, 112, and 128 GBd pulse amplitude modulation-4 (PAM-4) signals with differential output swings of 4, 3.59, 3.434, and 3.425 Vppd, respectively. The chip’s total power consumption is 725 mW, resulting in a power efficiency of 2.83 pJ/bit. Overall, this is the first time an optical modulator driver reported the ability to accommodate such a wide input swing and demonstrated the operation at a data rate of 256 Gb/s. These features make it a desired candidate for beyond 120-GBd optical links.
24 January 2025 in Journal of Lightwave Technology
We present an optical receiver using a SiGe BiCMOS transimpedance amplifier (TIA) chip with a 3 dB bandwidth over 67 GHz and a transimpedance gain up to 77 dB$\Omega$. This TIA consists of a single-ended input stage and two differential gain stages followed by a differential output stage. These traveling-wave stages feature variable gain and peaking. A TIA channel consumes 487.5 mW, or 2.2 pJ/bit operating at 112 GBd PAM-4, and occupies a chip area of 1.125 mm2. The THD at 1 GHz (10 GHz) is kept below 2% (5%) for input swings up to 1.6 mApp (1.3 mApp) by reducing the gain. After wire bonding the input of this TIA to a silicon photonic germanium photodiode, a bandwidth of 64 GHz and a group delay variation of 20.3 ps are obtained. Using a 10-tap feedforward equalizer (FFE), opto-electrical eye diagrams are captured and for 128 GBd NRZ, a sensitivity of -5.9 dBm is measured at a bit error rate (BER) of 1E-12. For 112 GBd PAM4, the KP4 sensitivity level is -4.8 dBm. The input-referred noise is measured at 18.8 pA/$\sqrt{}$Hz.
2 July 2024 in IEEE Journal of Solid-State Circuits
The surge of data traffic in emerging optical communication applications has led to the development of ultra-fast transceivers with extremely high data throughput. The latest transmitters and receivers aim for symbol rates of 150–200 Gbaud or even higher, striving to achieve bandwidths beyond 70 GHz. However, the current state-of-the-art analog-to-digital converters (ADCs) in advanced CMOS-FinFET technologies can only handle limited analog input bandwidths and sampling rates, becoming a bottleneck in enhancing the overall speed of the transceiver. A time-interleaved sampling front-end acting as an input signal de-interleaver can reduce the sub-ADCs’ analog bandwidth and clock jitter requirements. This article investigates a current-mode time-interleaved 1–4 sampling front-end operating at 200–256 GS/s, using a 50% duty-cycle slew-rate insensitive quadrature clocking strategy. The chip was fabricated in a 130-nm SiGe BiCMOS technology and was characterized by single-tone sinusoidal and non-return-to-zero/pulse-amplitude-modulation-4-level (NRZ/PAM-4) measurements at 200, 224, and 256 GS/s. The chip demonstrates a 3-dB analog input bandwidth beyond 67 GHz and a signal-to-noise-and-distortion ratio (SNDR) of 27.8–34.1 dB (at 200 GS/s), 25–36.3 dB (at 224 GS/s), and 22.3–39 dB (at 256 GS/s) for input frequencies from 1.1 to 67.1 GHz. The analog demultiplexing functionality of the sampling front-end is demonstrated with 100, 112, and 128 Gbaud NRZ/PAM-4 measurements. The complete chip consumes a power of 1.1 W at 256 GS/s, corresponding to an efficiency of 4.3 pJ/sample or 4.3 pJ/bit (with two samples per symbol).
15 July 2024 in Journal of Lightwave Technology
This paper presents a 160 Gb/s four-level pulse-amplitude modulation (PAM-4) optical receiver based on a 130nm SiGe BiCMOS ( $\mathbf {f_{T}/f_{MAX} = 350/450}$ $\mathbf {GHz}$ ) fully differential transimpedance amplifier (TIA) and two silicon photonic Ge photodiodes (PDs). The high-speed path of the TIA consists of a TIA input stage (TIS) followed by two variable gain amplifiers (VGAs) and an output buffer. A novel fully differential input DC current cancellation (IDCC) circuit is proposed to absorb the input DC currents and eliminate the DC offset of the TIS. 80 GBd PAM-4 operation is demonstrated with an off-line 5-tap feed-forward equalizer (FFE), achieving -7 dBm in-waveguide optical modulation amplitude (OMA) sensitivity at KP4-FEC ( $\mathbf {2.4\times 10^{-4}}$ ) and 0.99 pJ/b power consumption. 56, 64, and 72 GBd PAM-4 operations are demonstrated without any equalization, achieving -9.2, -8.4, and -5.9 dBm OMA sensitivity at KP4-FEC, respectively. To the best of our knowledge, this integrated optical receiver achieves the best sensitivity at KP4-FEC and the lowest power consumption for 64, 72 and 80 GBd PAM-4 operations.