1 February 2016 in Review of Scientific Instruments
Accurate measurement of the moisture content of paper is essential in papermaking and is also important in some paper-based microfluidic devices. Traditional measurement techniques provide very limited spatiotemporal resolution and working range. This article presents a novel method for moisture content measurement whose operating principle is the strong correlation between the optical transparency of paper and its moisture content. Spectrographic and microscopic measurement techniques were employed to characterize the relation of moisture content and relative transparency of four types of paper: hardwood chemi-thermomechanical pulp paper, Northern bleached softwood kraft paper, unbleached softwood kraft paper, and General Electric® Whatman™ grade 1 chromatography paper. It was found that for all paper types, the paper transparency increased monotonically with the moisture content (as the ratio of the mass-of-water to the mass-of-dry-paper increased from 0% to 120%). This significant increase in relative transparency occurred due to the refractive index matching role of water in wet paper. It is further shown that mechanical loading of the paper has little impact on the relative transparency, for loadings that would be typical on a paper machine. The results of two transient water absorption experiments are presented that show the utility and accuracy of the technique.
11 September 2018 in Drying Technology
Existing measurement techniques have prevented extensive investigations of the effect of dryer fabric structure on contact drying of paper. Using a novel optical measurement method, the moisture content (MC) of paper can be accurately quantified at high spatial and temporal resolution while it is sandwiched between the heater surface and the dryer fabric. To study the paper drying process, an experimental setup is designed to simulate realistic conditions of a typical paper dryer while providing optical access for the measurement system. Ten commercially available fabrics manufactured by weaving synthetic filaments are used in the investigations. The 3D structure of the fabrics is characterized using optical coherence tomography (OCT). The fabrics are used in the experiments to investigate the effects of the filament structure and paper/fabric contact on the drying process. It is shown the fabric structure affects the drying rate and the drying time. Fabrics that have a relatively large drying rate at high paper MC may have a relatively small drying rate at low levels of MC. The contact area and 3D arrangement of the filaments have the greatest impact on the drying process. Adjacent filaments result in larger blocked regions of the paper surface, which reduces the drying rate. The spatial distribution of moisture as a function of time reveals that frequent rewetted spots appear during the drying. These rewetting spots are caused by reabsorption of water condensed on the fabric filaments.
8 October 2018 in Drying Technology
A custom experimental apparatus is designed to perform through air drying under well-controlled drying conditions such as air temperature and mass-flowrate. Using a novel optical measurement technique, the spatial distribution of moisture content in paper during through air drying is quantified as a function of time. The technique is capable of measuring the moisture content distribution with high spatiotemporal resolution while air flows through a paper mat sitting on a permeable dryer fabric. Four commercially available fabrics with different structural design and properties are used in the investigations. The effect of the fabrics’ structural properties, which are characterized using optical coherence tomography (OCT), is studied under various drying conditions. It is shown that the geometry of the contact spots of the fabrics has a significant impact on the drying time at high drying intensities. However, at low rates of drying (i.e., low air temperature and flowrate), no correlation between drying time and fabric properties is observed. After a cycle of through air drying, the permeability of paper increases irreversibly. This increased permeability is observed to be a function of the fabric structure. It is shown that the increase in permeability is larger for coarse fabric structures although no monotonic correlation with the fabric permeability can be observed. Comparing the spatial maps of moisture content with the paper grammage distribution reveals that there is a correlation between the local grammage and the spatial pattern of drying in a paper sheet.