Institute of Catalysis Research and Technology (IKFT), Karlsruhe Institute of Technology (KIT), Hermann-von Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
Auto-generated profile, based on publicly available information
Benjamin Niethammer
Institute of Catalysis Research and Technology (IKFT), Karlsruhe Institute of Technology (KIT), Hermann-von Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
Recent progress regarding the production of alternative liquid fuels is described with a focus on catalyst development. Fuels for spark ignition engines as well as diesel fuels are considered and their potentials regarding the reduction of harmful emissions are addressed. Two main strategies are described. The first implies production of synthesis gas from renewables or CO2 and subsequent synthesis of methanol or dimethyl ether. Both can be further converted to a series of valuable fuels, e.g., high‐quality gasoline or oxymethylene ethers. The second strategy comprises the production of ethanol and its conversion to gasoline.
1 March 2018 in SAE International Journal of Fuels and Lubricants
Bio-fuels of the 2nd generation constitute a key approach to tackle both Greenhouse Gas (GHG) and air quality challenges associated with combustion emissions of the transport sector. Since these fuels are obtained of residual materials of the agricultural industry, well-to-tank CO2 emissio
The production of CO2-neutral fuels is a key technology to achieve the European Union’s targets of greenhouse gas reduction in the transport sector. For a straightforward application such as drop-in fuel, regenerative gasoline must meet emission requirements without causing significant changes in engine parameters. The objective of this work was to demonstrate the emission reduction potential of fuel from the bioliq® plant by reducing the content of heavy aromatics in the product refinement. For three blends with varying contents of bioliq® fuel, the spray behavior was studied in a pressurized chamber and the particulate and hydrocarbon emissions were investigated using a single-cylinder research engine. With increasing bioliq® fuel content, atomization was degraded by lower flash boiling at low pressure. This effect vanished at higher chamber pressures. Measurements of particulate and hydrocarbon emissions showed significant improvements of 50% to 100% and 10%, respectively, compared to previously investigated bioliq® fuel fractions from 2017. The formation of particulate emissions is virtually unaffected by the blending of bioliq® fuel, due to the absence of heavy aromatics in the refined bioliq® product. Hydrocarbon emissions increased by 20% with higher bioliq® fuel content and late injection timings due to inferior mixture formation as a result of slightly reduced atomization. However, near the optimum injection timing, the hydrocarbon emissions are independent of the bioliq® fuel admixture.