In this work, the temporal and spatial rotational temperature, as an indicator of spark temperature in the gas, of an ignition spark at ambient pressure is determined. With optical emission spectroscopy, the rotational bands of the nitrogen C3Πu → B3Πg transition at a wavelength of 337 nm are for determination. In addition, the electrical values of the current and the voltage are measured with a digital storage oscilloscope. All measurements are performed with a common nickel spark plug and a commercial 90 mJ ignition coil. The dwell time of the coil is varied in four steps from 100 to 25% and the influence on the rotational temperature is measured. The results are split into the three spark phases: breakdown, arc discharge, and glow discharge. The results show a cold breakdown, which is independent from the dwell time. On average, arc discharge is the hottest discharge phase, while the glow discharge has a medium rotational temperature.
1 March 2018 in SAE International Journal of Fuels and Lubricants
Bio-fuels of the 2nd generation constitute a key approach to tackle both Greenhouse Gas (GHG) and air quality challenges associated with combustion emissions of the transport sector. Since these fuels are obtained of residual materials of the agricultural industry, well-to-tank CO2 emissio
Ammonia (NH3) is a promising carbon-free fuel for internal combustion engines, but its low reactivity and poor ignition properties present significant challenges for stable operation. This study presents the development and experimental validation of a spark-ignited combustion process that enables stable engine operation using 100% liquid NH3 as a single fuel. A modified single cylinder research engine, equipped with NH3 port fuel injection and a high-energy capacitive ignition system was used to investigate combustion behavior under various load conditions. The results show that stable, knock-free combustion with pure NH3 is feasible at every operating point without any ignition aids like diesel fuel or hydrogen (H2). The full load conditions of a diesel engine can be represented with an indicated efficiency of 50% using this combustion process. The emission measurements show nitrogen oxides (NOx) and NH3 emissions in a 1:1 ratio, which is advantageous for a passive SCR system. Increased nitrous oxides (N2O) formation occurs at low loads and cold combustion chamber temperatures. This work demonstrates the technical viability of carbon-free NH3 combustion in spark-ignited (SI) engines and represents a promising step towards net-zero combustion.