21 July 2023 in Combustion Engines
The article discusses issues related to the assessment of pollutant emissions from a railbus during transport work. The test object was a rail vehicle equipped with two diesel engines with a total power of 780 kW, Stage IIIB homologated. Measurements were carried out on the route Poznań - Wągrowiec in two directions. During the tests, the vehicle performed a transport service, where the number of passengers was counted. For the completed cycles, the average number of people was 82 and 18. On the basis of the obtained data, the vehicle operating conditions and emission indicators were analyzed, which were related to the number of passengers. A dimensionless toxicity index was also determined.
31 December 2024 in Systemy Logistyczne Wojsk
The article discusses the Rapid Prototyping (RP) technology in the design of components of civil and military rail vehicles. The literature review has revealed a research niche in this area due to the specific requirements for these vehicles and a very narrow market. Because construction of those vehicles is mainly a manufacture, there is a risk of discrepancies between the 3D model, and the actual product. This issue has a significant impact on the design process, which is often associated with frequent changes during production. However, thanks to RP method, it is possible to refine designing component before it’s installation on the vehicle. This results in the aim of this work, namely to develop the concept of a roof vent for a rail vehicle as a confirmation of the thesis that the RP technology significantly accelerates and facilitates work in the designing of rail components. In order to solve the research problems posed, qualitative research methods were used. The analysis allowed two roof vent concepts to be tested simultaneously by designing it from interchangeable parts. In addition, thanks to the availability of plastics compliant with fire protection standard PN-EN 45545, a new type of vent has been designed strictly for 3D printing technology. This results with detail that would be technologically impossible to produce using conventional methods due to hardware limitations. One of the most important conclusions obtained after the research is the fact that this technology is not suitable for the production of large-size elements and serial production.
16 November 2024 in Rail Vehicles/Pojazdy Szynowe
The article presents the currently used criteria for evaluating offers in tender procedures for the purchase of new rolling stock. A literature review and the results of the analysis of tender procedures in three segments of rolling stock are presented: passenger cars, traction units and locomotives. The summary shows that the most important evaluation criterion remains the price criterion, which is in line with legal and formal requirements.
7 October 2023 in Rail Vehicles/Pojazdy Szynowe
The article presents the result of modernization of the SM42 locomotive carried out by H. Cegielski Fabryka Pojazdów Szynowych from Poznań (Poland). The scope of modernization was discussed and the parameters of the locomotive before and after the introduced changes were presented. The new...