Thue Sylvester Bording

Thue Sylvester Bording

Auto-generated profile, based on publicly available information

Thue Sylvester Bording

Department of Geoscience, Aarhus University, DK-8000 Aarhus, Denmark

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2021 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
MAMuhammad Rizwan Asif
Muhammad Rizwan Asif
TBThue S. Bording
Thue S. Bording
PMPradip K. Maurya
Pradip K. Maurya
BZBo Zhang
Bo Zhang
GFGianluca Fiandaca
Gianluca Fiandaca
JLJakob Juul Larsen
Jakob Juul Larsen
Inversion of large-scale time-domain transient electromagnetic (TEM) surveys is computationally expensive and time-consuming. The calculation of partial derivatives for the Jacobian matrix is by far the most computationally intensive task, as this requires calculation of a significant number of forward responses. We propose to accelerate the inversion process by predicting partial derivatives using an artificial neural network. Network training data for resistivity models for a broad range of geological settings are generated by computing partial derivatives as symmetric differences between two forward responses. Given that certain applications have larger tolerances for modeling inaccuracy and varying degrees of flexibility throughout the different phases of interpretation, we present four inversion schemes that provide a tunable balance between computational time and inversion accuracy when modeling TEM datasets. We improve speed and maintain accuracy with a hybrid framework, where the neural network derivatives are used initially and switched to full numerical derivatives in the final iterations. We also present a full neural network solution where neural network forward and derivatives are used throughout the inversion. In a least-squares inversion framework, a speedup factor exceeding 70 is obtained on the calculation of derivatives, and the inversion process is expedited ~36 times when the full neural network solution is used. Field examples show that the full nonlinear inversion and the hybrid approach gives identical results, whereas the full neural network inversion results in higher deviation but provides a reasonable indication about the overall subsurface geology.

2 November 2020 in Near Surface Geophysics
Verified
Journal Article
Closed access
PDF file
TBThue Bording
Thue Bording
AKAnders Kristian Kühl
Anders Kristian Kühl
GFGianluca Fiandaca
Gianluca Fiandaca
JCJørgen Fjeldsø Christensen
Jørgen Fjeldsø Christensen
ACAnders Vest Christiansen
Anders Vest Christiansen
EAEsben Auken
Esben Auken

17 July 2017 in Geophysical Journal International
Verified
Journal Article
Open access
PDF file
SPSøren Erbs Poulsen
Søren Erbs Poulsen
NBNiels Balling
Niels Balling
TBThue S. Bording
Thue S. Bording
AMAnders Mathiesen
Anders Mathiesen
SNSøren B. Nielsen
Søren B. Nielsen
This paper presents a numerical procedure for predicting subsurface temperatures and heat-flow distribution in 3-D using inverse calibration methodology. The procedure is based on a modified version of the groundwater code MODFLOW by taking advantage of the mathematical similarity between confined groundwater flow (Darcy's law) and heat conduction (Fourier's law). Thermal conductivity, heat production and exponential porosity–depth relations are specified separately for the individual geological units of the model domain. The steady-state temperature model includes a model-based transient correction for the long-term palaeoclimatic thermal disturbance of the subsurface temperature regime. Variable model parameters are estimated by inversion of measured borehole temperatures with uncertainties reflecting their quality. The procedure facilitates uncertainty estimation for temperature predictions. The modelling procedure is applied to Danish onshore areas containing deep sedimentary basins. A 3-D voxel-based model, with 14 lithological units from surface to 5000 m depth, was built from digital geological maps derived from combined analyses of reflection seismic lines and borehole information. Matrix thermal conductivity of model lithologies was estimated by inversion of all available deep borehole temperature data and applied together with prescribed background heat flow to derive the 3-D subsurface temperature distribution. Modelled temperatures are found to agree very well with observations. The numerical model was utilized for predicting and contouring temperatures at 2000 and 3000 m depths and for two main geothermal reservoir units, the Gassum (Lower Jurassic–Upper Triassic) and Bunter/Skagerrak (Triassic) reservoirs, both currently utilized for geothermal energy production. Temperature gradients to depths of 2000–3000 m are generally around 25–30 °C km−1, locally up to about 35 °C km−1. Large regions have geothermal reservoirs with characteristic temperatures ranging from ca. 40–50 °C, at 1000–1500 m depth, to ca. 80–110 °C, at 2500–3500 m, however, at the deeper parts, most likely, with too low permeability for non-stimulated production.

1 October 2019 in Journal of Contaminant Hydrology
Verified
Journal Article
Closed access
TBThue Sylvester Bording
Thue Sylvester Bording
GFGianluca Fiandaca
Gianluca Fiandaca
PMPradip Kumar Maurya
Pradip Kumar Maurya
EAEsben Auken
Esben Auken
ACAnders Vest Christiansen
Anders Vest Christiansen
TLThomas Hauerberg Larsen
Thomas Hauerberg Larsen

30 July 2016 in Geophysical Journal International
Verified
Journal Article
Closed access
PDF file
TBThue S. Bording
Thue S. Bording
SNSøren B. Nielsen
Søren B. Nielsen
NBNiels Balling
Niels Balling
Accurate information on thermal conductivity and thermal diffusivity of materials is of central importance in relation to geoscience and engineering problems involving the transfer of heat. Several methods, including the classical divided bar technique, are available for laboratory measurements of thermal conductivity, but much fewer for thermal diffusivity. We have generalised the divided bar technique to the transient case in which thermal conductivity, volumetric heat capacity, and thereby also thermal diffusivity are measured simultaneously. As the density of samples is easily determined independently, specific heat capacity can also be determined. The finite element formulation provides a flexible forward solution for heat transfer across the bar and thermal properties are estimated by inverse Monte Carlo modelling. This methodology enables a proper quantification of experimental uncertainties on measured thermal properties and information on their origin. The developed methodology was applied to various materials, including a standard ceramic material and different rock samples, and measuring results were compared with results applying traditional steady-state divided bar and an independent line-source method. All measurements show highly consistent results and with excellent reproducibility and high accuracy. For conductivity the obtained uncertainty is typically 1–3%, and for diffusivity uncertainty may be reduced to about 3–5%. The main uncertainty originates from the presence of thermal contact resistance associated with the internal interfaces in the bar. These are not resolved during inversion and it is imperative that they are minimized. The proposed procedure is simple and may quite easily be implemented to the many steady-state divided bar systems in operation. A thermally controlled bath, as applied here, may not be needed. Simpler systems, such as applying temperature-controlled water directly from a tap, may also be applied.

22 August 2023 in Water Resources Research
Verified
Journal Article
Open access
RTRasmus Thalund‐Hansen
Rasmus Thalund‐Hansen
MTMads Troldborg
Mads Troldborg
LLLéa Levy
Léa Levy
ACAnders Vest Christiansen
Anders Vest Christiansen
TBThue S. Bording
Thue S. Bording
PBPoul L. Bjerg
Poul L. Bjerg
A new methodology was developed to support contaminant mass discharge (CMD)‐based risk assessment of groundwater contamination downgradient of point source zones. Geoelectrical cross‐borehole induced polarization (IP) data were collected at a site undergoing in situ remediation of chlorinated solvents for determining 2D hydraulic conductivity (K) distributions with an inversion model resolution of 0.15 m (vertically) x 0.50 m (horizontally) in three control planes from 10 to 20 m depth. Additionally, 18 slug tests and 31 grain size distribution analyses (GSA) from the control planes, were used for K‐estimation. The geometric means and variance of the IP, slug test, and GSA derived K‐estimates were consistent with previously studied sandy aquifers. Furthermore, the vertical variation in K between two geological settings, a sandy till and a meltwater sand formation, was clearly identified by the IP K‐estimates. The vertical variation was backed up by hydraulic profiling tool (HPT) measurements. Random realizations of CMD were simulated based on the cross‐borehole IP derived K‐values. For comparison, the CMD was also estimated with a geostatistical conditional simulation approach, using the data from slug tests and GSAs. The high IP resolution captured the small scale variations in K across the transects and led to CMD predictions with a narrow uncertainty interval, whereas slug test and GSA either under‐ or overestimated the magnitude of the areas with the highest CMD. Applying the geophysical cross‐borehole method for estimating K‐distributions in addition to traditional methods would improve CMD‐based risk assessment and evaluation of remediation performance at contaminated sites.