1 July 2006 in IEEE Transactions on Power Electronics
MRMarcio Do Carmo Barbosa Rodrigues
Marcio Do Carmo Barbosa Rodrigues
ETEstevao Coelho Teixeira
This work presents a novel current multilevel (CML) inverter topology, named boost CML inverter, and its application on energy processing of single-phase grid-connected photovoltaic (PV) systems. The structure allows a high power factor operation of a PV system, injecting a quasi-sinusoidal current into the grid, with virtually no displacement in relation to the line voltage at the point of common coupling among the PV system and the loads. The major appeals of using the CML technique are the balanced current sharing among semiconductor switches and the decrease of the current slope in the circuit devices, with a consequent reduction of conducted and radiated electromagnetic interference (EMI). The CML technique also allows adapting or minimizing current waveforms harmonic content. System description, mathematical approach, and design guidelines are presented, providing an overview of the new topology. In order to validate the proposed concepts, experimental measurements, made in a small-scale laboratory prototype, are also presented. The obtained results evidence the feasibility of the application of this new topology on singlephase grid-connected PV systems.
22 June 2015 in IEEE Industrial Electronics Magazine
A review of various proposed schemes to increase the reliability and life span of solid-state lighting (SSL) systems is presented in this article. Since the mainstream devices employed for such lighting systems are inorganic, high-power light-emitting diodes (LEDs), which are devices characterized by their very long life, most of the questions in reliability and endurability arise from the electronic offline circuit driving the LEDs. Issues regarding the limited reliability of specific components, such as electrolytic capacitors, are introduced. Several power-?conversion configurations aimed to capacitance reduction and capacitor technology exchange are put forward as alternative solutions for implementing long-life drivers, with remarks on both their benefits and drawbacks. An extensive literature review on the topic is carried out, and some practical outcomes from recent research on offline LED driving are highlighted.
20 June 2014 in IEEE Transactions on Industry Applications
This paper proposes an offline single-stage light-emitting diode (LED) driver based on a novel approach to reduce low-frequency ripple in LED arrays supplied from mains, while assuring high input power factor (PF). The proposal employs a series resonant dc-dc converter integrated into a bridgeless boost power factor correction (PFC) stage. The resonant stage works to reduce the low-frequency ripple transmitted from the output of the PFC stage to the LEDs with only small power losses. This solution achieves three main goals: 1) reduction of the bulk capacitance used at the dc bus, allowing for the use of long-life film capacitors; 2) increase in the overall efficiency of the LED driver owing to the low switching and conduction losses in the shared switching network; and 3) assuring high input PF. Experimental results of a driver without electrolytic capacitors for a 100-W street lighting LED luminaire are presented, showing overall efficiency in excess of 92%, input PF greater than 0.97, and line current harmonic content in compliance with the IEC 61000-3-2 standard.
17 July 2014 in IEEE Transactions on Power Electronics
In this paper, a static and dynamic photoelectrothermal model including the impact of low-frequency current ripple on light-emitting diodes (LEDs) performance is proposed. The objective of this study is to evaluate the dynamical interaction among thermal, photometrical, and electrical properties of the LEDs when they are supplied by a dc constant current with a superposed low frequency sinusoidal ripple, which is the common case in offline LED drivers. Therefore, this paper presents both a model and experimental data for analyzing the LED photometrical behavior in terms of luminous flux, efficacy, flicker, and chromaticity. Three laboratory prototypes with different heat sinks and LED models have been tested. Experimental results are presented to evaluate the LED photometrical behavior under the aforementioned operating conditions and to validate the proposed modeling methodology.