28 October 2021 in Traumatology and Orthopedics of Russia
This publication is the official report describing all total hip arthroplasty procedures registered in the database from 01.01.2007 to 31.12.2020. During this period, 74762 operations were performed: 67019 (89.64%) primary and 7743 (10.36%) revision. The proportion of males and females underwent primary arthroplasty was 41.1% and 59.0%, respectively. The age of patients with primary arthroplasty was 57.8 years (95% CI from 57.7 to 57.9), with revision 59.3 years (95% CI from 59.0 to 59.6). The absolute number of primary hip arthroplasty procedures added into the database increased annually from 2007 to 2012. Since 2015, there has been a trend towards a decrease in the number of hip arthroplasty, due to the more intensive growth in the number of knee replacements performed. The number of revision hip arthroplasty operations varies from year to year with a clear tendency to increase, except 2020. The large proportion of revisions are accounted for by early revisions performed in the first years after primary hip arthroplasty, as well as early re-revisions. The main types of implants fixation on primary arthroplasty during the reporting period were cementless (50.89%) and hybrid (32.33%). In patients of older age groups, there is a significant decrease in the proportion of cementless fixation, while the proportion of hybrid, reverse hybrid and cemented structures is increasing. There are significant fluctuations in the ratio of different types of implants fixation in different years.
25 December 2017 in Traumatology and Orthopedics of Russia
Значительные дефекты вертлужной впадины, особенно сопровождающиеся нарушением целостности тазового кольца, являются серьезной проблемой ревизионного эндопротезирования тазобедренного сустава и создают дополнительные сложности для фиксации ацетабулярного компонента эндопротеза. Одним из перспективных вариантов решения описанной проблемы является использование индивидуальных трех- фланцевых вертлужных компонентов (CTAC — Custom Triflange Acetabular Component), проектируемых на основе предоперационной компьютерной томографии с учетом особенностей костных дефектов пациента. Цель исследования — оценить эффективность использования CTAC при ревизионном эндопротезировании тазобедренного сустава. Материал и методы. Проанализированы результаты лечения 12 пациентов, перенесших ревизионное эндопротезирование с применением аддитивных технологий компьютерного моделирования и 3D-печати CTAC. Время наблюдения пациентов после эндопротезирования составило в среднем 7±3 мес. (от 1 до 10 мес.). У 7 пациентов из 12 были выявлены дефекты вертлужной впадины типа 3B по W.G. Paprosky, у 4 — типа 3А и у одного — 2С. Результаты. У 2 пациентов из 12 произошли вывихи эндопротеза, что потребовало проведения повторных оперативных вмешательств на тазобедренном суставе, одному из них — открытое вправление вывиха с санацией раны, другому — замена артикулирующей пары ацетабулярного компонента эндопротеза. Суммы баллов по шкале Харриса и визуальной аналоговой шкале боли до лечения составили 28±7 и 7±1, соответственно, после эндопротезирования — 76±9 и 3±1, соответственно.Выводы. Применение аддитивных технологий при ревизионном эндопротезировании тазобедренного сустава у пациентов с обширными костными дефектами вертлужной впадины и таза позволяет провести точное предоперационное планирование, восстановить центр ротации сустава, восполнить дефицит костной ткани, надежно фиксировать индивидуальный трехфланцевый вертлужный компонент эндопротеза, что значительно улучшает результаты лечения и удовлетворенность пациентов операцией.
15 September 2023 in Traumatology and Orthopedics of Russia
Background. The number of primary anterior cruciate ligament (ACL) reconstructions increases every year, which causes an increase in revision interventions due to ACL graft failure. When studying the literature, we identify many factors that together influence the outcome of revision ACL reconstruction, but are not always taken into account by surgeons. Aim of the review — is to perform a systematic review of studies that evaluated the outcomes of revision anterior cruciate ligament reconstructions and to identify optimal solutions to the most common problems encountered in preoperative planning. Methods. Information search was performed in the eLIBRARY, PubMed, and Scopus databases for the period from 2013 to 2022. Studies describing the main aspects of revision ACL reconstruction were selected for analysis. Inclusion criteria were the following: mean patient follow-up period of no less than 12 months, number of observations of no less than 10 cases. After evaluation of 898 articles, 22 articles were included in the systematic review. Results. Five main factors that should be taken into account in preoperative planning of revision ACL reconstruction have been identified: choice of the graft, necessity of reconstruction of the anterolateral complex, correction of tibial plateau deformity in the sagittal plane, determination of indications for one- or two-stage intervention, method of bone defect replacement in two-stage surgical treatment. Conclusion. The patient’s autogenous tissues should be preferred when choosing a graft. Correction of excessive anteroposterior tibial plateau inclination angle is performed only at the second revision intervention if the inclination angle exceeds 12º. Reconstruction of the anterolateral complex should be performed in young, active patients who are involved in pivot sports and in case of severe anterior instability. When determining the possibility of performing revision ACL reconstruction in one or two stages, the canal diameter is not a crucial parameter, as it is necessary to take into account the possibility of fusion of the canals from the previous surgery with the newly created ones. If the canals have correct entry points, one-stage revision reconstruction can be performed with the canal width not exceeding 10 mm and depending on the expected diameter and type of the prepared tendon graft. Bone grafting of the secondary dilated canals in two-stage intervention can be carried out using any material, but allogenous bone or synthetic grafts have certain advantages.
11 June 2025 in Traumatology and Orthopedics of Russia
The paper analyzes the local total hip arthroplasty (THA) registry database over 18 years, from 2007 to 2024. The following questions were posed. Are there any changes in the structure of revision THA? What are the current trends in revision THA in recent years? What revision technologies are being utilized? A total of 11.201 cases of revision procedures were analyzed, which accounted for 12.4% of all registered THAs. Compared to previous analyses, the share of early revisions has increased — 42.2% of initial revisions and 87.6% of subsequent re-revisions are performed within the first five years after the previous surgery. This analysis revealed several important trends: The significant increase in both the absolute number and proportion of infection-related revisions (40.7%). This share is significantly higher for re-revisions (72.5%) compared to 20.2% for initial revisions. Rejuvenation of revision — the average age is 60.7 years for aseptic revisions and 58.5 for infection-related ones. The increase in proportion of trabecular metal constructs and other revision acetabular components, as well as a significant increase (up to 11.9%) of custom-made acetabular implants produced via 3D printing. For femoral component revision, there is a steady trend towards using Wagner-type tapered fluted titanium components. Their share increased from 39.4% in 2019 to 61.7% in 2024. There is a sharp increase in the number of revision procedures, a growing proportion of complex revisions requiring advanced and costly implants, and an exceptionally rapid rise in the number of infection-related revisions. It is therefore clear that the challenges of revision arthroplasty may soon affect all surgeons performing primary total hip arthroplasty — initially through the need to manage infectious complications, and later due to the gradual accumulation of patients requiring other types of revisions, including repeat procedures.
4 July 2024 in Traumatology and Orthopedics of Russia
РВРубцов Дмитрий Вячеславович
Рубцов Дмитрий Вячеславович
+3
Background. The results of revision anterior cruciate ligament reconstruction (ACLR) are usually worse than the primary ACLR. The positive outcome of the revision ACLR is significantly influenced by the following factors: anatomical position of bone tunnels, correct choice of graft, its preparation and fixation method. Equally important is to choose the accurate indications for additional extraarticular interventions. The aim of the study is to evaluate the role of a peroneus longus tendon (PLT) autograft in one-stage revision ACL reconstruction and to compare the obtained data with the results of primary ACLR. Methods. The comparison was carried out between the RACL-PLT group (n = 29) and the PACL-HT group (n = 82), which underwent single-stage revision ACLR with a PLT autograft and primary ACLR with a hamstring tendons (HT) autograft, respectively. Subjective and objective evaluation was performed on the KOOS, IKDC, and Lysholm Knee scales. Also, in the RACL-PLT group, the position of the central entry points into the primary and revision tunnels was determined. Results. We observed no statistically significant differences during the objective assessment of knee joint stability between the groups (p0.999). During the subjective assessment on the KOOS, IKDC and Lysholm Knee scales, significantly higher results were obtained in the PACL-HT group (p0.001). The position of the central entry points into the revision tunnels corresponded to the normative values in all cases. Conclusions. The analysis of the use of a PLT autograft in revision ACLR, as well as the achievement of the anatomical position of the revision tunnels showed: 12 months after surgery, the results of an objective assessment between the revision and primary ACLR are comparable; the results of a subjective assessment are statistically significantly different. However, the differences in indicators do not reach a minimal clinically important difference.
28 October 2021 in Traumatology and Orthopedics of Russia
Background. The problem of management of bone tissue defects remains one of the tasks that a surgeon faces during primary total knee arthroplasty (TKA). Since the number of TKA is increasing every year, modern scientific research aimed at solving the problem of bone defect replacement remains important. The aim of the study was to evaluate the effectiveness of various methods of bone defects management in primary TKA based on the analysis of literature. Materials and Methods. We conducted a search of articles in PubMed, eLIBRARY, Scopus from 2005 to 2020. Results. On the whole our search led to 1217 papers. Finally 19 articles that met inclusion criteria were included in this review. Each of the methods of bone defect replacement has its advantages and disadvantages. The results of the studies show that the he defect size is not a key factor for choosing the method, since with relatively identical defect parameters, different plastic options were used with a satisfactory clinical outcome. The endoprosthesis component should be fixed in at least two zones in every chosen method. In young patients with good bone quality preference in chosen methods should be given to bone grafts, which allow to preserve the bone stock. Based on the papers analysis, we have proposed the algorithm for method choosing for each clinical case. Conclusion. Each surgeon chooses a method for replacing bone defects based on their own preferences and such criteria as the equipment of the operating room, the surgical team experience, the quality of the patients bone and the defect size.