Anton Sergeevich Gofer

Anton Sergeevich Gofer

Auto-generated profile, based on publicly available information

Anton Sergeevich Gofer

Tsivyan Novosibirsk Research Institute of Traumatology and Orthopedics

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 September 2023 in Traumatology and Orthopedics of Russia
Verified
Journal Article
Open access
PDF file
AGAnton S. Gofer
Anton S. Gofer
AAAleksandr A. Alekperov
Aleksandr A. Alekperov
MGMikhail B. Gurazhev
Mikhail B. Gurazhev
AAArtem K. Avdeev
Artem K. Avdeev
VPVitaliy V. Pavlov
Vitaliy V. Pavlov
AKAndrey A. Korytkin
Andrey A. Korytkin
Background. The number of primary anterior cruciate ligament (ACL) reconstructions increases every year, which causes an increase in revision interventions due to ACL graft failure. When studying the literature, we identify many factors that together influence the outcome of revision ACL reconstruction, but are not always taken into account by surgeons. Aim of the review — is to perform a systematic review of studies that evaluated the outcomes of revision anterior cruciate ligament reconstructions and to identify optimal solutions to the most common problems encountered in preoperative planning. Methods. Information search was performed in the eLIBRARY, PubMed, and Scopus databases for the period from 2013 to 2022. Studies describing the main aspects of revision ACL reconstruction were selected for analysis. Inclusion criteria were the following: mean patient follow-up period of no less than 12 months, number of observations of no less than 10 cases. After evaluation of 898 articles, 22 articles were included in the systematic review. Results. Five main factors that should be taken into account in preoperative planning of revision ACL reconstruction have been identified: choice of the graft, necessity of reconstruction of the anterolateral complex, correction of tibial plateau deformity in the sagittal plane, determination of indications for one- or two-stage intervention, method of bone defect replacement in two-stage surgical treatment. Conclusion. The patient’s autogenous tissues should be preferred when choosing a graft. Correction of excessive anteroposterior tibial plateau inclination angle is performed only at the second revision intervention if the inclination angle exceeds 12º. Reconstruction of the anterolateral complex should be performed in young, active patients who are involved in pivot sports and in case of severe anterior instability. When determining the possibility of performing revision ACL reconstruction in one or two stages, the canal diameter is not a crucial parameter, as it is necessary to take into account the possibility of fusion of the canals from the previous surgery with the newly created ones. If the canals have correct entry points, one-stage revision reconstruction can be performed with the canal width not exceeding 10 mm and depending on the expected diameter and type of the prepared tendon graft. Bone grafting of the secondary dilated canals in two-stage intervention can be carried out using any material, but allogenous bone or synthetic grafts have certain advantages.

4 July 2024 in Traumatology and Orthopedics of Russia
Verified
Journal Article
Open access
PDF file
AGAnton Sergeevich Gofer
Anton Sergeevich Gofer
AAAleksandr A. Alekperov
Aleksandr A. Alekperov
MGMikhail B. Gurazhev
Mikhail B. Gurazhev
AAArtem K. Avdeev
Artem K. Avdeev
Vitaliy Leonidovich LukinovVitaliy Leonidovich Lukinov
Vitaliy Leonidovich Lukinov
РВРубцов Дмитрий Вячеславович
Рубцов Дмитрий Вячеславович
Background. The results of revision anterior cruciate ligament reconstruction (ACLR) are usually worse than the primary ACLR. The positive outcome of the revision ACLR is significantly influenced by the following factors: anatomical position of bone tunnels, correct choice of graft, its preparation and fixation method. Equally important is to choose the accurate indications for additional extraarticular interventions. The aim of the study is to evaluate the role of a peroneus longus tendon (PLT) autograft in one-stage revision ACL reconstruction and to compare the obtained data with the results of primary ACLR. Methods. The comparison was carried out between the RACL-PLT group (n = 29) and the PACL-HT group (n = 82), which underwent single-stage revision ACLR with a PLT autograft and primary ACLR with a hamstring tendons (HT) autograft, respectively. Subjective and objective evaluation was performed on the KOOS, IKDC, and Lysholm Knee scales. Also, in the RACL-PLT group, the position of the central entry points into the primary and revision tunnels was determined. Results. We observed no statistically significant differences during the objective assessment of knee joint stability between the groups (p0.999). During the subjective assessment on the KOOS, IKDC and Lysholm Knee scales, significantly higher results were obtained in the PACL-HT group (p0.001). The position of the central entry points into the revision tunnels corresponded to the normative values in all cases. Conclusions. The analysis of the use of a PLT autograft in revision ACLR, as well as the achievement of the anatomical position of the revision tunnels showed: 12 months after surgery, the results of an objective assessment between the revision and primary ACLR are comparable; the results of a subjective assessment are statistically significantly different. However, the differences in indicators do not reach a minimal clinically important difference.

31 March 2024 in Traumatology and Orthopedics of Russia
Verified
Journal Article
Open access
PDF file
AGAnton Sergeevich Gofer
Anton Sergeevich Gofer
AAAleksandr A. Alekperov
Aleksandr A. Alekperov
MGMikhail B. Gurazhev
Mikhail B. Gurazhev
AAArtem K. Avdeev
Artem K. Avdeev
Vitaliy Leonidovich LukinovVitaliy Leonidovich Lukinov
Vitaliy Leonidovich Lukinov
РВРубцов Дмитрий Вячеславович
Рубцов Дмитрий Вячеславович
Background. Revision anterior cruciate ligament reconstruction is becoming more and more common in the knee surgery due to the annual increase in the number of primary anterior cruciate ligament reconstructions. Choosing the most suitable graft and determining the staging of the surgical treatment by preoperative assessment of the possibility of performing the most anatomical revision canals and their interposition with the primary canals are the main factors that influence treatment results. Aim of the study — comparative assessment of the results of using hamstring tendon and peroneus longus tendon autografts in a one-stage revision reconstruction of the anterior cruciate ligament. Methods. A retrospective analysis of the medical records of 36 patients who underwent revision anterior cruciate ligament reconstruction was performed. The patients were divided into two groups: in the patients of the study group (n = 19) a peroneus longus tendon (PLT) autograft was used, in the comparison group (n = 17) a hamstring tendon autograft (HT) was applied. Subjective and objective evaluation using the KOOS, IKDC, and Lysholm scales was performed, and position of the central entry points of the primary and revision canals was determined. There were no statistically significant differences in the objective assessment of the knee joint stability. Significantly better results of subjective assessment of the knee function according to the Lysholm and KOOS scales were obtained in the PLT group (p = 0.042 and p0.001, respectively). Position of revision canals corresponded to the standard values, but position of the femoral canal had a slight cranial and anterior displacement. It was also found that the PLT graft diameter was statistically significantly larger than the HT graft diameter (p0.001). Results. There were no statistically significant differences in the objective assessment of the knee joint stability. Significantly better results of subjective assessment of the knee function according to the Lysholm and KOOS scales were obtained in the PLT group (p = 0.042 and p0.001, respectively). Position of revision canals corresponded to the standard values, but position of the femoral canal had a slight cranial and anterior displacement. It was also found that the PLT graft diameter was statistically significantly larger than the HT graft diameter (p0.001). Conclusion. One-stage revision anterior cruciate ligament reconstruction is a safe and effective surgical procedure providing satisfactory objective and subjective clinical results. Use of peroneus longus tendon autograft allows to obtain better results in comparison with the hamstring tendon autograft.

15 September 2025 in Traumatology and Orthopedics of Russia
Verified
Journal Article
Open access
PDF file
MGMikhail B. Gurazhev
Mikhail B. Gurazhev
Vitaliy Leonidovich LukinovVitaliy Leonidovich Lukinov
Vitaliy Leonidovich Lukinov
VBVladislav S. Baitov
Vladislav S. Baitov
AGAnton S. Gofer
Anton S. Gofer
EIEvgeniy A. Ivanov
Evgeniy A. Ivanov
APAleksandr A. Pronskikh
Aleksandr A. Pronskikh
Background. Aseptic loosening of the knee prosthesis components is one of the most common causes of revision surgery. The acceptable range of angular values for postoperative alignment of the lower limb and the frontal positioning of the prosthetic components remains a subject of debate. The aim of the study — to identify the predictors of the early aseptic loosening of prosthetic components following primary total knee arthroplasty. Methods. The study group included 31 patients with aseptic loosening of prosthetic components. The comparison group consisted of 55 patients with no signs of loosening over a follow-up period of at least 8 years. Baseline characteristics (sex, age, body mass index, and operated side) were compared, along with preoperative and postoperative angular alignment of the lower limbs, specifically, the anatomical femorotibial angle (aFTA) and the hip-knee-ankle angle (HKA), as well as reference angles for prosthetic component positioning. Results. Patient age over 60.5 years and BMI over 27.5 were associated with a 2.9-fold and 2.6-fold increased risk of prosthetic loosening, respectively. Preoperative varus deformity, with an HKA angle exceeding 9.5° and an aFTA over 6.5°, increased the risk of loosening by 9.6 and 23.1 times, respectively. Postoperative residual deformity exceeding 0.5° in either direction, as measured by the aFTA, increased the risk of loosening by 8.7 times. Valgus positioning of the tibial component was associated with a 2.8-fold increased risk of component loosening. Conclusions. In elderly and overweight patients with pronounced varus deformity of the lower limb, personalized preoperative planning should be prioritized to prevent early aseptic loosening of prosthetic components. In cases where postoperative residual deformity or valgus positioning of the tibial component is detected, enhanced clinical follow-up with radiographic monitoring every 6 months is recommended. If radiolucent lines progress and pain is present, early consideration of revision surgery is advisable, as it may increase the likelihood of a successful conservative revision.

22 July 2025 in N.N. Priorov Journal of Traumatology and Orthopedics
Verified
Journal Article
Open access
PDF file
AAArtem K. Avdeev
Artem K. Avdeev
AGAnton S. Gofer
Anton S. Gofer
AAAleksandr A. Alekperov
Aleksandr A. Alekperov
DRDmitriy V. Rubtsov
Dmitriy V. Rubtsov
VPVitaliy V. Pavlov
Vitaliy V. Pavlov
Partial-thickness tears of the rotator cuff (RC) of the shoulder joint (SJ) are a common condition that causes pain and limits SJ function, significantly reducing quality of life. The prevalence of such tears reaches up to 32% among SJ injuries and disorders. Among all isolated RC tendon injuries, supraspinatus tendon lesions are predominant, accounting for up to 13%. This work aimed to conduct a systematic review of research assessing radiographic parameters of SJ bone anatomy as risk factors for RC injury, as well as the outcomes of surgical treatment for partial-thickness RC tears. A search was conducted in the eLIBRARY, PubMed, and Scopus databases. The search depth was 10 years (2013–2023). The inclusion criteria for the quantitative analysis were a mean follow-up duration of at least 6 months and a minimum of 10 cases per study. Following a keyword-based screening, 18 publications were included in the quantitative analysis. The most significant radiographic risk factors for RC tears included the critical shoulder angle (CSA), lateral acromial angle (LAA), and acromial index (AI). Two principal surgical techniques for managing Ellman grade III partial-thickness RC tears were identified: tear completion and transtendinous tendon repair. Both techniques yielded satisfactory outcomes; however, it remains unclear which method should be preferred. Although the majority of studies report a direct association between CSA and RC injury, this parameter requires further investigation, as angular values obtained from radiographs without adherence to the Suter–Henninger protocol may differ significantly from those obtained in accordance with the protocol, as well as from CT or MRI findings. The majority of publications did not consider parameters like LAA and AI to be key predictors of RC injury. The analyzed outcomes of surgical treatment for partial-thickness RC tears showed no significant differences despite the use of different surgical techniques, such as tear completion and transtendinous tendon repair. However, this issue requires further investigation, including subsequent assessment of tendon healing quality based on MRI findings.

23 January 2026 in Traumatology and Orthopedics of Russia
Verified
Journal Article
Open access
PDF file
AAArtem K. Avdeev
Artem K. Avdeev
AGAnton S. Gofer
Anton S. Gofer
AAAleksandr A. Alekperov
Aleksandr A. Alekperov
DRDmitriy V. Rubtsov
Dmitriy V. Rubtsov
TMTariel Z. Mamuladze
Tariel Z. Mamuladze
VPVitaliy V. Pavlov
Vitaliy V. Pavlov
Background. Pathology of the long head of the biceps tendon (LHBT) includes dislocation/subluxation, tendinitis, and tendon rupture and is frequently associated with rotator cuff injuries. Surgical treatment options include tenotomy or tenodesis. Although the choice of the tenodesis level for the LHBT is largely subjective, the tenodesis site affects not only functional outcomes but also the risk of pathological fracture of the humerus. The aim of the study — to evaluate the influence of drill hole diameter for the suprapectoral tenodesis of the long head of the biceps on the risk of the pathological fractures of the proximal humerus using finite element analysis. Methods. A three-dimensional model of the humerus, including cortical and trabecular bone components, was constructed based on CT data of a 64-year-old patient. Finite element analysis (ANSYS; SOLID185 elements, average element size ~0.7 mm) included the following scenarios: (1) a fall with the arm abducted at 45°, (2) external and internal rotational loading of the humerus with kinematic rotation of 3°-6° in both directions, and (3) comparative stress distribution analysis in intact bone (no drill hole) and after creation of through holes. An intact humerus was compared with humeri containing suprapectoral through holes of d = 5.0/1.5 mm (anchor fixation) and d = 7.0/2.4 mm (screw fixation). Results. During a fall on an abducted arm, peak tensile stresses were localized in the region of the surgical neck on the medial surface of the humerus, while the bicipital groove and suprapectoral region remained outside the zone of critical stress. During rotational loading, the presence of a drill hole shifted the maximum shear stress toward the drilling zone. In intact bone, the critical external rotation angle decreased from 6° to 5° after drilling. In bone with reduced mineral density, it decreased from 6° to 3°. For internal rotation, the critical angle decreased from 5° to 4°. The influence of drill hole diameter was minimal, accounting for only a 1-2% increase in stress. Conclusions. This study identified critical patterns in how bone perforation affects the stress–strain state of the humerus. Bone strength was primarily dependent on the presence of perforation rather than on the drill hole diameter within the investigated range, and increasing the diameter from 5 to 7 mm resulted in only a minor increase in stress (1-2%). These findings suggest that the optimal strategy is to place the drill hole in the proximal humerus, where critical shear stress concentrations are not initially present.