Erbil Kavci

Erbil Kavci

Auto-generated profile, based on publicly available information

Erbil Kavci

Kafkas Üniversitesi

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 January 2020 in Chemical Engineering Communications
Verified
Journal Article
Closed access
EKErbil Kavci
Erbil Kavci
In this study, the pine cone was activated using NaOH solution and used in the adsorption of malachite green. The effects of initial pH, temperature, initial concentration, and contact time on the adsorption process were evaluated. Functional groups of active pine cone were characterized using Fourier Transform Infrared (FT-IR). Surface tissue images were obtained using Scanning Electron Microscopy (SEM). Isotherm studies were performed by analyzing data at the equilibrium. The compatibility of the experimental data with Langmuir, Freundlich, and Temkin isotherms was tested and results revealed that the data fits well to Langmuir type 2. Adsorption capacity is 111.1 mg/g and high adsorption value. Pseudo-first order and pseudo-second order kinetic model equations were used to analyze the kinetic data of the adsorption process. The pseudo-second order kinetic model was found to fit very well. The adsorption process was found to be endothermic, spontaneous and physical process according to thermodynamic parameters (ΔG0, ΔH0, ΔS0).

2 December 2021 in Chemical Engineering Communications
Verified
Journal Article
Closed access
EKErbil Kavci
Erbil Kavci
JEJülide Erkmen
Jülide Erkmen
MBMehmet Semih Bingöl
Mehmet Semih Bingöl
In this study, apricot stones were modified with citric acid and used in the adsorption of methylene blue. Fourier transform infrared (FT-IR) Scanning electron microscopy (SEM), and X-Ray Diffraction (XRD) were used to characterize the adsorbent. The influence of the initial pH, temperature, contact time, and initial concentration on the adsorption process was investigated. The thermodynamic investigation showed that adsorption was spontaneous and the adsorption process was endothermic. In experimental studies, isotherm models by Langmuir, Freundlich, Temkin, and Dubinin – Radushkevich (D-R) were analyzed and experimental data showed the best agreement with the Temkin isotherm model. We found that the maximum monolayer adsorption capacity for the Langmuir isotherm model was 19.01 mg/g. Pseudo-first and second-order models were examined and, according to the results of the kinetic model analysis, the highest correlation coefficient (R2> 0.99) belongs to the pseudo-second-order kinetic model. It was concluded that the adsorption mechanism was carried out in both the intra-particle diffusion and the liquid film diffusion model.

1 September 2020 in Construction and Building Materials
Verified
Journal Article
Closed access
JEJülide Erkmen
Jülide Erkmen
Halil ibrahim YavuzHalil ibrahim Yavuz
Halil ibrahim Yavuz
EKErbil Kavci
Erbil Kavci
MSMihriban Sari
Mihriban Sari

5 August 2025 in Polymers
Verified
Journal Article
Open access
PDF file
AÇAli Çiçekçi
Ali Çiçekçi
FSFatih Sevim
Fatih Sevim
MSMelike Sevim
Melike Sevim
EKErbil Kavcı
Erbil Kavcı
In recent years, industrial wastewater discharge containing heavy metals has increased significantly and has adversely affected both human health and the aquatic ecosystem. The increasing demand for metals in industry has prompted researchers to focus on developing effective and economical methods for removal of these metals. In this study, the removal of Ni(II) from wastewater using the Graphene oxide@Fe3O4@Pluronic-F68 (GO@Fe3O4@Pluronic-F68) nano composite as an adsorbent was investigated. The nanocomposite was characterised using a series of analytical methods, including Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) analysis. The effects of contact time, pH, adsorbent amount, and temperature parameters on adsorption were investigated. Various adsorption isotherm models were applied to interpret the equilibrium data in aqueous solutions; the compatibility of the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models with experimental data was examined. For a kinetic model consistent with experimental data, pseudo-first-order, pseudo-second-order, Elovich, and intra-particle diffusion models were examined. The maximum adsorption capacity was calculated as 151.5 mg·g−1 in the Langmuir isotherm model. The most suitable isotherm and kinetic models were the Freundlich and pseudo-second-order kinetic models, respectively. These results demonstrate the potential of the GO@Fe3O4@Pluronic-F68 nanocomposite as an adsorbent offering a sustainable solution for Ni(II) removal.


18 December 2020 in Sinop Üniversitesi Fen Bilimleri Dergisi
Verified
Journal Article
Open access
AÇAli Çi̇çekçi̇
Ali Çi̇çekçi̇
BDBünyamin Dönmez
Bünyamin Dönmez
EKErbil Kavci
Erbil Kavci
OLOmer LACIN
Omer LACIN
Tr en Bu çalışmada, malahit yeşilinin ham şeftali çekirdeği kabuğu üzerine yaygın adsorpsiyon izoterm modelleri ve termodinamik analizi incelenmiştir. Elde edilen sonuçlardan, korelasyon katsayılarına göre en uygun modelin Freundlich izotermi olduğu belirlenmiştir. Ayrıca, hesaplanan n değerinin 1’den büyük olması adsorbentin heterojen bir yüzeye sahip olduğunu göstermiştir. Langmuir izoterm modelinde ise, maksimum adsorpsiyon kapasitesi 8.19 mg.g-1 olarak hesaplanmıştır. Ayrıca, termodinamik analizlerden, serbest entalpi değişiminin -21.53 kJ.mol-1 ve Gibbs serbest enerji değerinin ise yaklaşık -39 kJ.mol-1 olması, adsorpsiyon prosesinin ekzotermik , fiziksel karakterli ve kendiliğinden yürüdüğünü ortaya koymaktadır. Sonuç olarak, şeftali çekirdeği kabuğunun, sulu çözeltilerdeki malahit yeşilinin uzaklaştırılması hususunda uygun bir adsorbent olarak kullanılabilir. Ayrıca elde edilen izoterm modeli ve termodinamik parametrelerin, endüstriyel olarak malahit yeşilinin giderilmesi prosesine faydalı veriler sağlanacağı söylenebilir. In this study, common adsorption isotherm models and thermodynamic analysis of malachite green on raw peach kernel peel are investigated. From the results obtained, it is determined that the most suitable model according to the correlation coefficients is Freundlich isotherm. In addition, the calculated n value greater than 1 indicates that the adsorbent has a heterogeneous surface. In Langmuir isotherm model, the maximum adsorption capacity is calculated as 8.19 mg.g-1. Also, from the thermodynamic analysis, the free enthalpy change of -21.53 kJ.mol-1 and the Gibbs free energy value of about -39 kJ.mol-1 reveal that the adsorption process is exothermic, physically and spontaneous. As a result, the peach kernel skin can be used as a suitable adsorbent for removing malachite green in aqueous solutions. In addition, it can be said that the isotherm model and thermodynamic parameters obtained will provide useful data for the industrial greenhouse removal process.