Marek Buran

Marek Buran

Auto-generated profile, based on publicly available information

Marek Buran

Institute of Electrical Engineering, Slovak Academy of Sciences, Dubravska cesta 9, 841 04 Bratislava, Slovakia

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 July 2019 in Superconductor Science and Technology
Verified
Journal Article
Open access
PDF file
MBMarek Búran
Marek Búran
MVMichal Vojenčiak
Michal Vojenčiak
MMMarek Mošať
Marek Mošať
AGAsef Ghabeli
Asef Ghabeli
MSMykola Solovyov
Mykola Solovyov
FGFedor Gömöry
Fedor Gömöry
Reliability is one of the crucial requirements of conductors used in resistive superconducting fault current limiters. Possible critical current degradation of a REBCO coated conductor during the limiter operation restrains broader application of devices based on these conductors. In this article the impact of an electrical stabilization layer on the conductor protection against overheating as well as its effect on electrical current evolution during the limitation period are investigated. For the experimental part of the study, a commercial copper stabilized REBCO coated conductor and a modified conductor without copper stabilization are compared. Extensive experimental work complemented by electro-thermal numerical modeling paved the way for studying the electrical and thermal effects separately. The numerical model assuming adiabatic conditions is sufficient to reproduce experimental results and predict the peak temperature for conductors with various stabilization layers in realistic conditions. Reduction of the conductor critical current caused by multiple current limitation pulses was studied using pulses with various durations. It was observed that the degradation due to temperature rise is gradual with the rate depending solely on the peak temperature. It is this quantity through which other parameters like the pulse duration, the thickness of stabilization and the peak current cause the tape damaging.

13 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
MPMarcela Pekarcikova
Marcela Pekarcikova
JMJozef Mišík
Jozef Mišík
MDMarian Drienovsky
Marian Drienovsky
JKJozef Krajčovič
Jozef Krajčovič
MVMichal Vojenciak
Michal Vojenciak
FGFedor Gömöry
Fedor Gömöry
We enhanced the performance of superconducting tapes during quenching by coating the tapes with various composites, with regards to the application of such coated systems in superconducting fault current limiters. In composition of the coating, we varied the type of epoxy matrix, the content of ceramic filler particles and the use of reinforcement in order to optimize the thermal and the mechanical stability of the coated tapes. By this way modified superconducting tapes were able to reduce the maximum temperature 170 °C of not modified superconducting tape to 55 °C during the quench with electric field up to 130 V m−1.

3 March 2023 in Superconductor Science and Technology
Verified
Journal Article
Closed access
PKP Kováč
P Kováč
DBD Berek
D Berek
TMT Melišek
T Melišek
JKJ Kováč
J Kováč
IHI Hušek
I Hušek
JCJ H Choi
J H Choi
Monel-sheathed MgB2 wires with 6, 18 and 54 filaments of diameter 0.83 mm manufactured by Sam Dong Co., Ltd, have been subjected to twisting, drawing and rolling and measurements at low temperatures. R(T), I–V characteristics, critical currents and stress/strain tolerances of these wires were analyzed. Low reduction of critical current (⩽10%) by twisting between 50 mm and 12.5 mm was observed, especially for the wire with 54 filaments, which also showed the best strain tolerance to tension, ∼0.43% at 4.2 K. The engineering current density of the 18-filament wire was decreased by 56% by drawing from 0.83 mm to 0.4 mm, but improved by ∼24% by rolling from 0.83 mm to 0.64 mm. A small uninsulated coil was made from wire flattened from 0.83 mm to 0.64 mm by the wind and react process, resulting in a very high winding packing factor of 0.91 and also a high winding current density of 104 A cm−2 at B ⩽ 5.6 T. The presented properties are interesting for possible applications of these MgB2 wires in DC windings.

3 June 2021 in Superconductor Science and Technology
Verified
Journal Article
Closed access
PDF file
PKPavol Kovac
Pavol Kovac
JKJán Kováč
Ján Kováč
NPNicolas Perez
Nicolas Perez
JSJuliane Scheiter
Juliane Scheiter
MBMarek Buran
Marek Buran
DBDušan Berek
Dušan Berek
Up to now, the highest current densities of MgB 2 superconducting wires have been obtained by the internal magnesium diffusion (IMD) method. MgB 2 superconductors are especially suitable for DC or AC windings generating low or medium magnetic fields, where thermal stability and low AC losses are important issues. Mechanical, thermal and electrical parameters of the wires are strongly influenced by metallic materials used for the outer sheath. While highly electrical conductive sheath material is beneficial for thermally stable behaviour, it has a great effect on the generation of high eddy current losses. To minimize the contribution of eddy current losses, multi-core MgB 2 wires with low purity Cu and Al sheaths were prepared by the IMD process and characterized in detail. Results of low temperature measurements are analysed and discussed in the present work.

17 March 2022 in Superconductor Science and Technology
Verified
Journal Article
Open access
PKP Kováč
P Kováč
LKL Kopera
L Kopera
TMT Melišek
T Melišek
MBM Búran
M Búran
IHI Hušek
I Hušek
JKJ Kováč
J Kováč
A wind and react (W&R) coil of inner diameter 53 mm has been made from multi-core MgB2/Nb/CuNi wire manufactured by the internal magnesium diffusion (IMD) process. The W&R coil is wound from non-insulated rectangular wire of 1 mm2 with only 5 µm thick stainless steel foil used for interlayer insulation. The transport current performance of the coil and short wire samples was measured in a liquid He bath at external magnetic fields of 4.5–8.5 T and also in self-field conditions in sub-cooled water ice at temperatures between 33 K and 38 K. The presented MgB2 coil exhibits stable behavior at water ice cooling, and its high space factor allows a high current density of winding in comparison to the data from the already published MgB2 coils. The presented results demonstrate that MgB2 windings can be used safely in He-free conditions inside sub-cooled water ice, and this technique can be further optimized and used for future MgB2 coils.

24 August 2022 in Superconductor Science and Technology
Verified
Journal Article
Closed access
MBM Búran
M Búran
LKL Kopera
L Kopera
PKP Kováč
P Kováč
The standard DC transport measurements of MgB2 composite conductors were done in vacuum, low-pressure helium gas, sub-cooled solid nitrogen and water ice. The effect of these coolants on electro-thermal behaviour was studied at self-field and temperature range from 32 K to 36.5 K. The obtained results show that even small volume of Helium gas enhances the sample thermal stability during the I–V measurement in comparison to those obtained in vacuum. The cooling by solid nitrogen improves the sample stability in contrast to helium gas. The measurements performed inn water ice exhibits an excellent and stable behavior of superconducting wire carrying high transport current below and above the quench as well. Consequently, water ice shows simple, safe, and promising He-free mode of cooling for future superconducting systems.