8 August 2024 in IEEE Journal of Solid-State Circuits
Real-time monitoring of dynamic biological processes in the body is critical to understanding disease progression and treatment response. These data, for instance, can help address the lower than 50% response rates to cancer immunotherapy. However, current clinical imaging modalities lack the molecular contrast, resolution, and chronic usability for rapid and accurate response assessments. Here, we present a fully wireless image sensor featuring a $2.5{\times }5$ mm2 CMOS integrated circuit for multicolor fluorescence imaging deep in tissue. The sensor operates wirelessly via ultrasound (US) at 5-cm depth in oil, harvesting energy with 221-mW/cm2 incident US power density (31% of FDA limits) and backscattering data at 13 kb/s with a bit error rate $\lt 10{^{-6}}$ . In situ fluorescence excitation is provided by micro-laser diodes controlled with a programmable on-chip driver. An optical front-end combining a multi-bandpass interference filter and a fiber optic plate (FOP) provides >6 OD excitation blocking and enables three-color imaging for detecting multiple cell types. A $36{\times }40$ pixel array captures images with <125- $\mu $ m resolution. We demonstrate wireless, dual-color fluorescence imaging of both effector and suppressor immune cells in ex vivo mouse tumor samples with and without immunotherapy. These results show promise for providing rapid insight into therapeutic response and resistance, guiding personalized medicine.
4 July 2022 in IEEE Journal of Solid-State Circuits
With the widespread of deep neural networks (DNNs) in diverse applications, tiny platforms such as Internet-of-Things devices are starting to adopt DNNs. Due to their extreme energy and form factor constraints, conventional digital-only implementations of multiply-and-accumulate (MAC) acceleration faced fundamental limitations. To that end, the investigation into mixed-signal computing architectures is growing rapidly. Motivated by the flash ADC, this article proposes FlashMAC architecture that can natively support multibit multiplication. In addition, through fusing time- and frequency-domain computing methods without power-hungry oscillators, it enables low latency accumulation with low power consumption. As a result, the proposed time-frequency hybrid architecture achieves high energy efficiency with the support for complex DNN models requiring higher precision. To enhance the robustness of PVT variation of the mixed-signal architecture, a frequency calibration loop is integrated. In addition, motivated by the data-dependent performance of the FlashMAC architecture, variable latency-aware scheduling is proposed. The FlashMAC does not skip MAC operations as zero-skipping architectures do, but the latency of the operation can be lower when operands are smaller in magnitude. Tackling the issue through software and hardware co-optimization, loose synchronization architecture and magnitude-aware weight reordering increase the DNN benchmark performance by achieving higher utilization of the parallel FlashMAC array. The proposed features are integrated into a test chip which is fabricated in 65-nm logic CMOS technology. The silicon chip achieves 56.52 TOPS/W peak energy efficiency and a peak operating frequency of 90 MHz. Tested with the VGG16 benchmark trained on the Imagenet dataset, it achieved 17.04-ms latency while showing 11.15 TOPS/W energy efficiency. As a result, compared to the previous state-of-the-art, the proposed FlashMAC achieved 3.15 $\times $ higher normalized energy efficiency.