1 July 2021 in International Journal of Hydrogen Energy
7 August 2022 in International Journal of Hydrogen Energy
28 September 2007 in ECS Transactions
Electrocatalysts of the type Pt-IrO2 (at different concentrations) have been synthesized and characterized in Regenerative Fuel Cell (RFC) configuration. Commonly IrO2 has been mainly used as oxygen evolution electrocatalyst. These oxide-metal mixtures were prepared by incipient wetness technique and characterized by XRD and SEM, obtaining in all cases nanoparticles. The powder materials were impregnated by hot-spray technique on Nafion 117 in order to evaluate water electrolysis/fuel cell performance. The catalyst loading in oxygen electrodes was about 6 mg•cm-2. Water electrolysis/fuel cell performance has been evaluated using a single cell test fixture with a geometric area of 5 cm2. It is derived that for fuel cell operation an excess of Pt favours the oxygen reduction process whereas IrO2 promotes oxygen evolution.
30 June 2024 in Revista de Ingenieria Innovativa
One of the most critical parameters for the capture of solar radiation is the angle of inclination of the surface and its contribution to optimization to maximize the amount of solar irradiation received. Numerous methods have been used worldwide to determine the angle of inclination. Unfortunately, many of these models are for fixed angles, which do not adapt to the sun's position during the year, resulting in the loss of essential amounts of irradiation that could be used. This work presents the methodology for developing a structure for photovoltaic (PV) panels fixed to the floor, which includes variations in the angle of inclination. The goal is to maximize the solar energy gain (energy per square meter) the panel receives over a year by making monthly tilt angle adjustments. The inclination angles are calculated for a structure, which will be placed in Coatzacoalcos, Veracruz, Mexico. The monthly angle of the prototype can have positive and negative values (tropical region); the maximum is 41.19° for December, and the minimum is - 4.95°, corresponding to June. The study can be applied to build a similar structure, with related variations in the angle of inclination, to work in any city, as long as information from the city in question is
20 October 2006 in ECS Transactions
The production of hydrogen using renewable sources by for example electrolysis and photoelectrolysis, avoids the emission of pollutants to the environment, especially if the electrical power for the electrolyzer is supplied by renewable energy. At the moment two types of commercial hydrogen generators exist by means of an electrolysis process: the alkaline electrolyzer (EA) and the solid polymer electrolyte electrolyzer, called SPE. SPE electrolyzer technology has brought the possibility of having a cleaner hydrogen generator. Essential part of an SPE electrolyzer, is the membrane- electrode assembly (MEA), where hydrogen generation (cathode electrode) and oxygen evolution (anode electrode) reactions take place. In the present work IrO2 and Pt/Vu were used as anode and cathode respectively for an ESP electrolyzer. Electrochemical measurements were realized using 5 different MEÁs, prepared by a hot-spray technique, where electrocatalytic inks were prepared and airbrushdeposited onto the membrane at 20 cm. After several deposited layers the obtained dried catalytic surfaces were rather homogeneous. After deposition, a thermomechanical process was used. All assemblies were prepared using Nafion® 117 and loads of 2 mg-cm-2 of IrO2 (Electrochem)as anode and 1 mg-cm-2 of 20% Pt/Vu (Electrochem) as cathode, nafion solution, ethylic alcohol to the catalyzer and then ultrasound stirred. The Nafion solution quantity was varied for the cathode and anode. Data were collected obtaining the polarization, power density and EIS (Electrochemical Impedance Spectroscopy)curves at 25{degree sign}C using a hardware manufactured in the laboratory, containing titanium mesh as current collector