Enrique Esteban Niebles Nuñez

Enrique Esteban Niebles Nuñez

Auto-generated profile, based on publicly available information

Enrique Esteban Niebles Nuñez

Universidad Autónoma del Caribe, Colombia

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2016 in Welding International
Verified
Journal Article
Closed access
ENEnrique Esteban Niebles Nuñez
Enrique Esteban Niebles Nuñez
JSJimy Unfried Silgado
Jimy Unfried Silgado
JSJaime Elías Torres Salcedo
Jaime Elías Torres Salcedo
ARAntonio J. Ramírez
Antonio J. Ramírez
Problems of industries and manufacturers of welded structures in aluminium alloys are centred on reduction of mechanical properties in welded joints due to heat input effects on the heat affected zone; as well as effects of discontinuities and metallurgical defects, high cost repairs, and low productivity. The aim of this paper is to evaluate the influence of gas mixtures 80Ar20He (MG1), 60Ar40He (MG2), 80Ar19He1O2 (MG3), and 60Ar39He1O2 (MG4), on aluminium alloy AA5083-O weldability using filler metal ER5183 using the automated GMAW-P process. Methodology has included a factorial experiment design, customisation of welding parameters, and characterisation of base metal and welding regions. Analysis of results were carried out based on microstructure evaluation of welding regions, measurements of hardness and tensile properties, observations of discontinuities and defects, costs evaluation, and welding speed. Results show that gas mixtures with O2 are highly beneficial to obtain good weldability of the studied alloy.

1 August 2018 in Journal of Failure Analysis and Prevention
Verified
Journal Article
Closed access
PDF file
DSDavid A. Serje
David A. Serje
ENEnrique E. Niebles
Enrique E. Niebles
SLSheila K. Lascano
Sheila K. Lascano

1 January 2023 in Soldagem & Inspeção
Verified
Journal Article
Open access
PDF file
ÁÁÁlvaro Manuel Díaz Ávila
Álvaro Manuel Díaz Ávila
EOEdinson de Jesús Herrera De Oro
Edinson de Jesús Herrera De Oro
EPElkin Camilo Medellín Pérez
Elkin Camilo Medellín Pérez
ENEnrique Esteban Niebles Núñez
Enrique Esteban Niebles Núñez
JUJimy Unfried
Jimy Unfried
Since 2000, global steel production has significantly increased, reaching a record high of 1.7 billion metric tons in 2017. However, steel production accounts for 9% of global CO2 emissions. According to the International Energy Agency (IEA), steel demand is projected to double by 2050. To reduce carbon emissions per unit of steel production or adopt alternative construction approaches [1 1 Pradeep Kumar P, Santos DA, Braham EJ, Sellers DG, Banerjee S, Dixit MK. Punching above its weight: life cycle energy accounting and environmental assessment of vanadium microalloying in reinforcement bar steel. Environmental Science. Processes & Impacts. 2021;23(2):275-290. http://dx.doi.org/10.1039/D0EM00424C. PMid:33355560. http://dx.doi.org/10.1039/D0EM00424C... ], materials with a better strength-to-weight ratio have been introduced, with High-strength low-alloy (HSLA) steels standing out [2 2 Jindal S, Chhibber R, Mehta NP. Issues in Welding of HSLA steels. Advanced Materials Research. 2011;365:44-49. http://dx.doi.org/10.4028/www.scientific.net/AMR.365.44. http://dx.doi.org/10.4028/www.scientific... ]. HSLA steels include minimal amounts of alloying elements (0.05-0.15% by weight), such as Mo, Nb, Ti, and V [3 3 Vervynckt S, Verbeken K, Lopez B, Jonas JJ. Modern HSLA steels and role of non-recrystallisation temperature. International Materials Reviews. 2012;57(4):187-207. http://dx.doi.org/10.1179/1743280411Y.0000000013. http://dx.doi.org/10.1179/1743280411Y.00... 4 Li X, Shi L, Liu Y, Gan K, Liu C. Achieving a desirable combination of mechanical properties in HSLA steel through step quenching. Materials Science and Engineering A. 2019;138683. http://dx.doi.org/10.1016/j.msea.2019.138683. http://dx.doi.org/10.1016/j.msea.2019.13... -5 5 Costa e Silva A. Challenges and opportunities in thermodynamic and kinetic modeling microalloyed HSLA steels using computational thermodynamics. Calphad. 2020;68:101720. http://dx.doi.org/10.1016/j.calphad.2019.101720. http://dx.doi.org/10.1016/j.calphad.2019... ], and adding Nb to low-carbon steel can increase its strength by up to 50% [6 6 Almatani RA, DeArdo AJ. Rational alloy design of niobium-bearing HSLA steels. Metals. 2020;10(3):413. http://dx.doi.org/10.3390/met10030413. http://dx.doi.org/10.3390/met10030413... ,7 7 Silveira JW, Resende M. Competition in the international niobium market: a residual demand approach. Resources Policy. 2020;65:101564. http://dx.doi.org/10.1016/j.resourpol.2019.101564. http://dx.doi.org/10.1016/j.resourpol.20... ]

1 January 2014 in Información tecnológica
Verified
Journal Article
Open access
PDF file
ENEnrique E Niebles
Enrique E Niebles
JUJimy Unfried
Jimy Unfried
JTJaime E Torres
Jaime E Torres

1 January 2021 in International Journal of Engineering
Verified
Journal Article
Open access
PDF file
ABA. M. Barrios
A. M. Barrios
LOLorenzo Burgos Ortiz
Lorenzo Burgos Ortiz
ENE. E. Niebles-Nuñez
E. E. Niebles-Nuñez
LSLuis Armando Espitia Sanjuán
Luis Armando Espitia Sanjuán
JUJimy Unfried
Jimy Unfried
Dissimilar welded joints of AISI 430 and AISI 316L stainless steel were produced by the GMAW process using two different shielding gas mixtures composed of 97Ar-3N2 and 80Ar-19He-1O2. The microstructure of the heat-affected zone was characterized by optical and scanning electron microscopy, and Vickers microhardness measurements were carried out along the cross-section of the specimens. The dissimilar welded joints were submitted to immersion corrosion test in a 10%v/v hydrochloric acid solution for 24 and 72 hours. Afterward, yields strength, tensile strength, and elongation percentage were measured using tensile tests according to ASTM E8 standard. Non-immersed welded joints were used for comparison purposes. An analysis of variance was developed to evaluate the influence of immersion time and shielding gas mixture on yielding strength and tensile strength. The microstructure characterization showed that the heat-affected zone on AISI 430 side was the widest, and it was observed a significant presence of acicular ferrite, martensite, and coarsened ferritic grains. In contrast, on the heat-affected zone on AISI 316L side was not observed coarsening nor refinement of austenite grains. The AISI 430 heat-affected zone showed the maximum hardness values and higher susceptibility to corrosion damage. Tensile tests results evidenced that immersion corrosion tests did not change significantly ultimate strength in comparison to non-immersed specimens while yielding strength and elongation percentage were drastically decreased due to immersion time. According to the p-value, the immersion time is the most influencing factor on yielding strength and tensile strength of the dissimilar welded joints.

1 January 2009 in Información tecnológica
Verified
Journal Article
Open access
PDF file
ENEnrique E Niebles
Enrique E Niebles
WAWilliam G Arnedo
William G Arnedo