24 February 2023 in IEEE Transactions on Vehicular Technology
A 2 × 2 dual-band dual-circularly polarized (CP) Fabry-Pérot cavity (FPC) multiple input multiple output (MIMO) antenna is proposed in this paper. It is formed by arranging four identical FPC antenna elements with 90° rotation. The FPC antenna element is composed of a single linearly polarized (LP) feeder and a chiral metamaterial (CMM)-based partially reflective surface (PRS), which acts as a polarization converter. The feeder is with a hybrid structure of a slot radiator operating in the low band and a patch radiator in the high band. As the orthogonal currents on the end and center arms of the H-shaped patch break the degeneracy of two CP waves at different frequencies, the PRS simultaneously realizes left-hand CP (LHCP) and right-hand CP (RHCP) features at two different bands, respectively. To enhance the port isolation between two adjacent antenna elements, a broadband, wide-angle, polarization-independent metamaterial absorber (MMA) is introduced to suppress the space wave coupling. To verify the design concept, the proposed MIMO antenna prototype is fabricated and measured. The measured bandwidth with a voltage standing wave ratio (VSWR) of less than 2 covers 3.32-3.42 GHz and 6.23-6.93 GHz, and the LHCP pattern and RHCP pattern are realized at 3.33-3.42 GHz (2.7%) and 6.59-6.75 GHz (2.4%), respectively. A maximum gain enhancement is up to 5.31 dBi in the low band and up to 4.3 dBi in the high band. In addition, the port isolation is better than 42 dB, and the ECC is less than -40 dB. With these performances, the proposed MIMO antenna is suitable for vehicular satellite communication applications.
12 April 2024 in IEEE Transactions on Antennas and Propagation
A high-gain and beam-switchable multibeam holographic metasurface antenna (HMSA) array coated with phase-correcting metasurface (PCMS) is proposed. It comprises four identical HMSAs arranged in a crossed-shaped structure. Each beam has a different direction to allow for switchable control according to engineering specifications. The HMSA pattern is generated through holographic interference between the desired beam and the reference wave. A top-hat monopole Yagi radiator is employed as the surface-wave (SW) launcher to produce the reference wave. To enhance the gain, a PCMS is strategically suspended over the HMSA array at a distance of 6 mm. Each cell of the PCMS can provide arbitrary phase compensation in the reference plane to realize the in-phase plane wave. The phase lag arises from nonuniform phase distributions on the MS and different distances from each MS unit cell to the reference plane. It also acts as a superstrate to adjust the free-space wave coupling path. When the free-space wave and SW coupling have the same amplitude but out of phase, they subtract each other. A prototype is fabricated and measured, demonstrating that the use of PCMS can enhance the radiation performance of the HMSA array. This achieves a peak gain of 19.53 dBi, an SLL of less than −14.5 dB, and an aperture efficiency (AE) of more than 26.48%.
2 July 2020 in IEEE Transactions on Electromagnetic Compatibility
A compact high-isolation multiple-input multiple-output (MIMO) microbase station antenna consisting of two dual-polarized antenna elements is presented. The symmetrical magnetic coupling feeding network is used to feed the radiation patch of the dual-polarized antenna and to improve the isolation of the antenna element. By introducing parasitic square patches, the radiation characteristics and isolation of the dual-polarized antenna are improved. In addition, a modified closed-loop metasurface unit is designed and used to construct an isolation wall. When dual-polarized antenna elements are used to assemble a MIMO antenna, the proposed metasurface structure is inserted between them to reduce the coupling between MIMO antenna elements, regarded as a spatial band-stop filter to suppress the spatial electromagnetic waveform of the elements. After loading the metasurface isolation wall, the maximum increase of isolation is 9.17 dB at the center frequency point of 2.6 GHz. For antenna element ports and cross-polarized ports, the isolations are greater than 30 dB, and the isolation of the same polarized ports is better than 25 dB within the frequency band from 2.45 to 2.8 GHz. At the same time, the reflection coefficients of the ports of the elements are less than −15 dB. Finally, a prototype of the proposed MIMO microbase station antenna was fabricated and tested, and the experimental results are proximity with the simulation responses.
30 September 2022 in IEEE Transactions on Instrumentation and Measurement
In this article, a gain-enhanced wideband multiple-input multiple-output (MIMO) antenna with high isolation and quasi-omnidirectional radiation is proposed. It is a hexagonal structure and includes six identical endfire log-periodic dipole array (LPDA) elements. These antenna elements are distributed in the same plane and uniformly placed in a rotating arrangement with an angle difference of 60°, and then are suspended over a large metallic plate (LMP). To enhance the wideband gain, a different metasurface (MS) lens with a high refractive index is deployed around the endfire log-periodic dipole. The uniform MS lens makes electromagnetic waves deflect toward the array axis of the LPDA, whereas the gradient MS lens could form focused plane electromagnetic waves in the endfire direction. Furthermore, these antenna elements are isolated with a complementary split ring resonator (CSRR)-based electromagnetic band-gap (EBG) structure owing to its wide bandstop frequency and small-size characteristics. To validate the design concept, the prototype is fabricated and measured. The measured −10-dB impedance bandwidth covers 2.85–10.9 GHz (FBW 117.1%) and the gain varies from 10.37 to 14.82 dBi. Moreover, high isolation of better than 22.4 dB and low envelope correlation coefficient (ECC) of less than −62.3 dB is achieved between antenna elements. The proposed wideband MIMO antenna could be suitable for vehicular radar.
1 April 2023 in IEEE Antennas and Wireless Propagation Letters
In this letter, a UHF-RFID tag antenna with a size of 40 × 40 × 3.2 mm 3 is proposed for metallic objects. It is composed of a modified folded dipolar antenna (MFDA) and an embedded 2×2 artificial magnetic conductor (AMC) array with shorting vias. Multiple slots are etched on the MFDA and AMC to increase the current path, where the slots on the MFDA is vertical to that on the AMC so that the currents on the MFDA and AMC do not affect each other. Thus, the slots can be adjusted independently without affecting the resonant feature of the MFDA. Equivalent circuit models (ECM) are also presented to understand the impedance characteristics. A prototype mounted on a 20 × 20 cm 2 metal plate has been manufactured and measured. It is demonstrated that the proposed tag antenna shows a 3.9-dBi gain enhancement comparing with the MFDA without AMC and a maximum gain of -1 dBi at 919 MHz. Moreover, a maximum reading distance (RD) of about 14.2 m can be obtained.
24 January 2023 in IEEE Transactions on Vehicular Technology
This paper proposes a wideband high-gain transmit-array (TA) antenna for vehicular sensing and communication, which employs a dual-layer ultrathin Huygens' meta-surface (HMS). It consists of a 33 × 33 HMS unit cells-based TA, a feeder horn, and a three-dimensional printed fixture to hold them. Each HMS unit cell has two identical metal patterns (MPs) of two symmetrical U-shaped patches and one H-shaped patch, which are distributed on both surfaces of the ultrathin substrate. A pair of top U-shaped patches form the first single-wavelength loop mode, and another pair of bottom U-shaped patches forms the second single-wavelength loop mode. Due to the different phases of the incident waves on the top and bottom U-shaped patches, the two loop modes are generated at different frequencies. A third half-wavelength dipole mode is provided by the H-shaped patch. The three modes correspond to three different frequencies, forming a wide transmission frequency band. Three near-unity transmission peaks are yielded to ensure high and stable aperture efficiency (AE). As well, the transmission phase of the HMS unit cell varies with geometric dimensions, and five unit cell types are quantized to obtain 360° phase range with a low loss of less than 2.6 dB. To verify the design concept, a prototype is fabricated. Measurements show a 3-dB gain bandwidth of 17.9%, a maximum gain of 30.5 dBi at 26.2 GHz, and a high AE of 41.9%. It has unidirectional radiation pattern while reducing backlobe.