Chongqing Key Laboratory of Mobile Communications Technology, Engineering Research Center of Mobile Communications of the Ministry of Education, Chongqing, China
Auto-generated profile, based on publicly available information
Jie Liu
Chongqing Key Laboratory of Mobile Communications Technology, Engineering Research Center of Mobile Communications of the Ministry of Education, Chongqing, China
A 2 × 2 dual-band dual-circularly polarized (CP) Fabry-Pérot cavity (FPC) multiple input multiple output (MIMO) antenna is proposed in this paper. It is formed by arranging four identical FPC antenna elements with 90° rotation. The FPC antenna element is composed of a single linearly polarized (LP) feeder and a chiral metamaterial (CMM)-based partially reflective surface (PRS), which acts as a polarization converter. The feeder is with a hybrid structure of a slot radiator operating in the low band and a patch radiator in the high band. As the orthogonal currents on the end and center arms of the H-shaped patch break the degeneracy of two CP waves at different frequencies, the PRS simultaneously realizes left-hand CP (LHCP) and right-hand CP (RHCP) features at two different bands, respectively. To enhance the port isolation between two adjacent antenna elements, a broadband, wide-angle, polarization-independent metamaterial absorber (MMA) is introduced to suppress the space wave coupling. To verify the design concept, the proposed MIMO antenna prototype is fabricated and measured. The measured bandwidth with a voltage standing wave ratio (VSWR) of less than 2 covers 3.32-3.42 GHz and 6.23-6.93 GHz, and the LHCP pattern and RHCP pattern are realized at 3.33-3.42 GHz (2.7%) and 6.59-6.75 GHz (2.4%), respectively. A maximum gain enhancement is up to 5.31 dBi in the low band and up to 4.3 dBi in the high band. In addition, the port isolation is better than 42 dB, and the ECC is less than -40 dB. With these performances, the proposed MIMO antenna is suitable for vehicular satellite communication applications.
30 September 2022 in IEEE Transactions on Instrumentation and Measurement
In this article, a gain-enhanced wideband multiple-input multiple-output (MIMO) antenna with high isolation and quasi-omnidirectional radiation is proposed. It is a hexagonal structure and includes six identical endfire log-periodic dipole array (LPDA) elements. These antenna elements are distributed in the same plane and uniformly placed in a rotating arrangement with an angle difference of 60°, and then are suspended over a large metallic plate (LMP). To enhance the wideband gain, a different metasurface (MS) lens with a high refractive index is deployed around the endfire log-periodic dipole. The uniform MS lens makes electromagnetic waves deflect toward the array axis of the LPDA, whereas the gradient MS lens could form focused plane electromagnetic waves in the endfire direction. Furthermore, these antenna elements are isolated with a complementary split ring resonator (CSRR)-based electromagnetic band-gap (EBG) structure owing to its wide bandstop frequency and small-size characteristics. To validate the design concept, the prototype is fabricated and measured. The measured −10-dB impedance bandwidth covers 2.85–10.9 GHz (FBW 117.1%) and the gain varies from 10.37 to 14.82 dBi. Moreover, high isolation of better than 22.4 dB and low envelope correlation coefficient (ECC) of less than −62.3 dB is achieved between antenna elements. The proposed wideband MIMO antenna could be suitable for vehicular radar.
9 October 2023 in IEEE Transactions on Vehicular Technology
This paper presents the axial ratio (AR) bandwidth enhancement of a dual-band dual-circularly polarized (DBDCP) antenna. It utilizes a novel polarization-independent partial reflective surface (PRS) unit cell, which consists of two same metallic patterns with a relative 90o rotation on both surfaces of a substrate. Each metallic pattern is composed of a C-shaped arc and a circular patch. The LP field from the feeder is transformed into two different circularly polarized (CP) field at two respective bands by the unit cell. Due to the asymmetric structure and separated topology of two C-shaped arcs, a slight resonant deviation appears in AR for different polarized waves. Moreover, both x- and y-polarized waves are produced simultaneously by using Fabry-Pérot cavity (FPC) structure when a y-polarized feeder is used. Thus, the AR bandwidths for both x-and y-polarized incident waves are close to each other and combined deliberately into wide AR bandwidth. To validate the design concept, a prototype of the proposed MIMO antenna is fabricated and measured. The measured voltage standing wave ratio (VSWR) of less than 2 covers from 11.55 GHz to 14.8 GHz, and the LHCP pattern and RHCP pattern are realized in low band of 12-12.6 GHz (4.88%) and high band of 14.1-14.61 GHz (3.55%), respectively. The maximum gain is 13.5 dBi (13.1 dBi) at the low-band (high-band). Besides, the port isolation is better than 40 dB, and the ECC is less than -80 dB. With these performances, the proposed MIMO antenna can be employed for vehicular MIMO communications and sensing at Ku-band.