Mykhailo Krasota

Mykhailo Krasota

Auto-generated profile, based on publicly available information

Mykhailo Krasota

Central Ukrainian National Technical University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
CUCentral Ukrainian National Technical University
Central Ukrainian National Technical University
YKYuriy Kuleshkov
Yuriy Kuleshkov
TRTimofey Rudenko
Timofey Rudenko
MKMikhail Krasota
Mikhail Krasota
RORuslan Osin
Ruslan Osin
VRVasyl Reva
Vasyl Reva
Yuriy Kuleshkov, Professor, Doctor in Technics (Doctor of Technics Sciences), Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, e-mail: kul090455@gmail.com, ORCID ID: 0000-0001-6492-6919 Timofey Rudenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, e-mail: r-t-v@mail.ua, ORCID ID: 0000-0001-6879-7624 Mykhailo Krasota, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, e-mail: krasotamv@ukr.net, ORCID ID: 0000-0001-8791-3264 Ruslan Osin, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, e-mail: ruslan_osin@ukr.net, ORCID ID: 0000-0002-8927-5363 Vasyl Reva, master, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine Abstract The aim of the study is to create a theoretical basis that allows to calculate the forces of hot plastic deformation of the piston pin. One of the promising methods of restoring the piston fingers of the connecting rod - piston group of internal combustion engines is the method of hot plastic deformation. The process of restoring the piston fingers by hot plastic deformation can increase their strength and, in particular, fatigue strength. When developing the technological process of restoration of piston fingers using the method of hot plastic deformation by distributing it with a punch in the stamp, there is a problem of determining the effort required for high-quality deformation process. The article offers the theoretical basis for calculating the deformation forces. The result was obtained on the basis of the selected scheme of formation. As a result of the calculations we can conclude: 1. Restoration of the piston finger by hot plastic deformation allows to restore 95% of the fingers which have arrived in repair. 2. Piston fingers restored by hot plastic deformation in their technical parameters are not inferior to the new, achieved - "healing" of microcracks, creating internal compressive stresses, and grinding grain, which strengthens the material of the piston finger, in particular increasing its fatigue strength by 15… 20% . 3. As a result of theoretical studies of the resistance of the metal to plastic deformation were obtained dependences of the specific force on the punch depending on the ratio of the diameters of the workpiece. The aim of the study is to create a theoretical basis that allows to calculate the forces of hot plastic deformation of the piston pin. One of the promising methods of restoring the piston fingers of the connecting rod - piston group of internal combustion engines is the method of hot plastic deformation. The process of restoring the piston fingers by hot plastic deformation can increase their strength and, in particular, fatigue strength. When developing the technological process of restoration of piston fingers using the method of hot plastic deformation by distributing it with a punch in the stamp, there is a problem of determining the effort required for high-quality deformation process. The article offers the theoretical basis for calculating the deformation forces. The result was obtained on the basis of the selected scheme of formation. As a result of the calculations we can conclude: 1. Restoration of the piston finger by hot plastic deformation allows to restore 95% of the fingers which have arrived in repair. 2. Piston fingers restored by hot plastic deformation in their technical parameters are not inferior to the new, achieved - "healing" of microcracks, creating internal compressive stresses, and grinding grain, which strengthens the material of the piston finger, in particular increasing its fatigue strength by 15… 20% . 3. As a result of theoretical studies of the resistance of the metal to plastic deformation were obtained dependences of the specific force on the punch depending on the ratio of the diameters of the workpiece. Keywords hot plastic deformation, punch, deformation force Full Text: PDF References 1. Bisikenov, А.B. (1976). Analiz sposobov vostanovleniy avtotraktornuh shesteren [The analysis of the methods of recovery of automotive gears]. Remont selskohozystvennoy tehniki i nadezhnost – Agricultural Machinery Repair and Reliability. Vol. 76. 58-70. [in Russian]. 2. Kirillov, А.В. (1982). Analiz tehnologicheskih processov vostanovleniy zubchatuh kolyos s neravnomernum iznosom po dline zuba [Analysis of technological processes for restoring gears with uneven wear along the length of the teeth]. Remont traktorov i s/h mashin – Repair of Tractors and Agricultural Machines. Saratov. 78-830. [in Russian]. 3. Pashin, U.D. & Kirillov, А.В. (1982), Vosstovlenie culindricheskih zubchatuh kolyos [Restoration of cylindrical gears]. Stepnue prostoru – Steppe Expanses. 9. 52 [in Russian]. 4. Kuzmenkov, О.I. & Karabanov, F.F. (1980). Progressivnuye metodu vosstanovleniy zubchatuh kolyos [Progressive gear recovery methods]. Obzornay informaciy. Seriy: Mashinostroenie I metaloobrobotka Belorusskiy NIINTI i TEI Gosplana BSSR MinskS 22. [in Russian]. 5. Kuzmenko О.I. Tetoreticheskie osnovu vosstanovleniy formu i mehanocheskih svoystv tvurduh tel rotacionnum plasticheskim deformirovaniem [Theoretical foundations of restoring the shape and mechanical properties of solids by rotational plastic deformation]. Sovremennoe oborudovanie i tehnologicheskie processu dly vosstanovleniy iznoshenuh detaley mashin: tezisu dokladov na NTK stran –chlenov SEV i SFRU ("Remdetal-83”), 2. pp. 20-22. [in Russian]. 6. Kovalchuk U.М., Klimin В.I., Brusencov А.I. Tehnologiy i ustanovka dly vosstanovleniy valov- shesteren gidronasosov tipy NSh [Technology and installation for restoring the gear shafts of hydraulic pumps of the NSH type]. Sovremennoe oborudovanie i tehnologicheskie processu dly vosstanovleniy iznoshenuh detaley mashin: tezisu dokladov na NTK stran –chlenov SEV i SFRU ("Remdetal-83”), Мoskow.: CNIITEI, 2. pp. 19-20. [in Russian]. 7. Klimkin, В.I., Grebelnik, М.P. & Savchuk, S.А. (1985). Vosstanovlenie shesteren gidronasosov metodom plasticheskoy deformacii [Restoration of hydraulic pump gears by plastic deformation method]. Tehnologiy i organozciy proizvodstva – Technology and Organization of Production. Мoskow CIITEI Goskomcelhoztehniki. 3. 50-51. [in Russian]. 8. Tomsen Z., Yang I. & Kobayashi Sh. (1969). Mehanika plasticheskih deformaciy pri obrabotke metallov [Mechanics of plastic deformations in metal processing]. Мoskow: Mashinostroenie [in Russian]. 9. Ctopanskiy, L.G. (1979). Raschet processov obrabotki metallov davleniem [Calculations of metal forming processes]. Мoskow: Mashinostroenie [in Russian]. 10. Storozhev, М.V. & Popov, Е.А. (1977). Teoriy obrabotki metallov davleniem [Theory of metal forming]. Мoskow: Mashinostroenie [in Russian]. 11. Taranovskiy, I.Y., Pozdeev, А.А. & Ganago, О.А.. (1963). Theory of metal forming. I.Y.Taranovskogo (Ed.). Мoskow: Metalurgizizdat [in Russian]. 12. Unksov, Е.P., Dzhonson, U. & Kolmogorov, V.L.. (1983). Teoriy plasticheskih deformaciy metallov [Theory of plastic deformations of metals]. Е.P. Unksov, А.G.Ovchinnikova (Ed.). Мoskow. Mashinostroenie [in Russian]. 13. Henzel A. & Shpigel Т. (1982). Raschet energosilovuh parametrov v processah obrabotki metallov davleniem [Calculation of energy-power parameters in metal forming processes]: Sprav. izd. Мoskow. Metalurgiy [in Russian]. 14. Fillimonov, V. I. & Fillimonov, О. V. (2012). Teoriy obrabotki metallov davleniem [Theory of metal forming]: uchebnoe posobie . Ulianovsk : UlGTU [in Russian]. 15. Tomlenov, А.D. (1972). Teoriy plasticheskogo deformirovaniy metallov [Theory of plastic deformation of metals]. Moskow: Metalurgiy [in Russian]. GOST Style Citations Бисикенов А.Б. Анализ способов восстановления автотракторных шестерен. Ремонт сельскохозяйственной техники и ее надежность: сб. научных трудов. 1976. Вып. 76. С. 58-70. Кириллов А.В. Анализ технологических процессов восстановления зубчатых колес с неравномерным износом по длине зубьев. Ремонт тракторов и с/х машин: сб. научных трудов . Саратовский СХИ, Саратов, 1982. С. 72-83. Пашин Ю.Д., Кириллов А.В. Восстановление цилиндрических зубчатых колес. Степные просторы. 1982. № 9. 52 с. Кузьменков О.И., Карабанов Ф.Ф, Прогрессивные методы восстановления зубчатых колес. Обзорная информация. Серия: Машиностроение и металлообработка Белорусский НИИНТИ и ТЭИ Госплана БССР Минск, 1980. 22 с. Кузьменков О.И. Теоретические основы восстановления формы и механических свойств твердых тел ротационным пластическим деформированием. Современное оборудование и технологические процессы для вос¬становления изношенных деталей машин : тезисы докл. на НТК стран-членов СЭВ и СФРЮ. ("Ремдеталь-83”). М.: ЦНИИТЭИ. Ч. 2. С. 20-22. Ковальчук Ю.М., Климин В.И., Брусенцов А.И. и др. Технология и установка для восстановления валов-шестерен гидронасосов типа НШ. Современное оборудование и технологические процессы для восстановления изношенных деталей машин: тезисы докл. на НТК стран-членов СЭВ и СФРЮ " ("Ремдеталь-83"). М.: ЦНИИТЭИ, Ч. 2. С. 19-20. Климин В.И., Гребельник М.П., Савчук С.А. и др. Восстановление шестерен гидронасосов методом пластической деформации. Технология и организация производства. 1985. № 3. С. 50-51. Томсен 3., Янг И., Кобаяши Ш. Механика пластических деформаций при обработке металлов. М.: Машиностроение, 1969. 504 с. Стопанский Л.Г. Расчеты процессов обработки металлов давлением . М.: Машиностроение, 1979. 215 с. Сторожев М.В., Попов Е.А. Теория обработки металлов давле нием. М.: Машиностроение, 1977. 423 с. Теория обработки металлов давлением (Вариационные метода расчета усилии и деформаций) / И.Я.Тарновский, А.А.Поздеев О.А.Ганаго и др.; под ред. И.Я.Тарновского. М.: Металлругиздат, 1963. 672 с. Теория пластических деформаций металлов / Е.П.Унксов, У.Джонсон, В Л.Колмогоров и др.; под ред.Е.П.Унксова, А.Г.Овчинникова. М.: Машиностроение, 1983. 598 с. Хензель А., Шпигель Т. Расчет энергосиловых параметров в процессах обработки металлов давлением: справ.изд. Пер. с нем. М.: Металлургия, 1982. 360 с. Филимонов В. И., Мищенко О. В. Теория обработки металлов давлением: учебное пособие. Ульяновск : УлГТУ, 2012. 208 с. Томленов А.Д. Теория пластического деформирования металлов. Москва: Металлургия, 1972. 408 Copyright (c) 2021 Yuriy Kuleshkov, Timofey Rudenko, Mikhail Krasota, Ruslan Osin, Vasyl Reva

27 December 2023 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
ISIhor Shepelenko
Ihor Shepelenko
CUCentral Ukrainian National Technical University
Central Ukrainian National Technical University
MCMykhailo Chernovol
Mykhailo Chernovol
SLSerhii Leshchenko
Serhii Leshchenko
MKMichael Krasota
Michael Krasota
Ihor Shepelenko, Professor, Doctor in Technics (Doctor of Technic Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: kntucpfzk@gmail.com, ORCID ID: 0000-0003-1251-1687 Mykhailo Chernovol, Academician of the National Academy of Agrarian Sciences of Ukraine, Professor, Doctor in Technics (Doctor of Technic Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: mchernovol50@gmail.com , ORCID ID: 0000-0003-3048-6833 Serhii Leshchenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: serafsgm@ukr.net, ORCID ID: 0000-0001-9339-4691 Michael Krasota, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: krasotamv@ukr.net, ORCID ID: 0000-0001-8791-3264 Yakiv Nemyrovskyi, Professor, Doctor in Technics (Doctor of Technic Sciences), Zhytomyr Polytechnic State University, Zhytomyr, Ukraine, ORCID ID: 0000-0001-8005-8584 Volodymyr Shumliakivsky, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Zhytomyr Polytechnic State University, Zhytomyr, Ukraine, e-mail: shumliakivskyiv@ztu.edu.ua , ORCID ID: 0000-0002-1665-7686 Abstract This paper presents the results of research aimed at improving the quality of antifriction coatings obtained by finishing antifriction non-abrasive treatment (FANT). It has been previously established that the formation of an antifriction coating during FANT largely depends on the technological parameters that determine the conditions of contact between the tool and the surface being treated. The study of the peculiarities of surface contact, their regularities, as well as the main parameters of the FANT process, makes it possible to improve the quality of the antifriction coating, and therefore the operational properties of the part. The aim of the presented research is to evaluate the influence of technological factors of the FANT process on the quality of antifriction coatings and to obtain their rational values. The indicators of the quality of the antifriction coating are its continuity, surface roughness and mass transfer of the antifriction material. The optimisation parameters are the main modes of FANT and the geometrical characteristics of the initial surface to be treated. To determine the influence of the selected factors on the indicators characterising the quality of the antifriction coating, a central composite plan matrix was implemented, which allowed us to obtain mathematical models of the influence of factors on the adopted response functions. The processing of the experimental data was carried out using the STATISTICA 12.0 software package. As a result of the multifactorial experiment, statistical models were obtained that allow assessing the impact of the studied factors on the optimisation criteria. The significance of the obtained coefficients was checked using the Student's criterion, and the adequacy of the obtained equations was checked using the Fisher's criterion. A detailed analysis of the Pareto map and tabular results of the experiment allowed to establish the influence of the research factors on the optimisation criteria. The obtained mathematical models made it possible to determine the optimal combination of technological factors that ensure the quality of the coating, as well as to establish the rational values of FANT modes and geometric characteristics of the output surface. This paper presents the results of research aimed at improving the quality of antifriction coatings obtained by finishing antifriction non-abrasive treatment (FANT). It has been previously established that the formation of an antifriction coating during FANT largely depends on the technological parameters that determine the conditions of contact between the tool and the surface being treated. The study of the peculiarities of surface contact, their regularities, as well as the main parameters of the FANT process, makes it possible to improve the quality of the antifriction coating, and therefore the operational properties of the part. The aim of the presented research is to evaluate the influence of technological factors of the FANT process on the quality of antifriction coatings and to obtain their rational values. The indicators of the quality of the antifriction coating are its continuity, surface roughness and mass transfer of the antifriction material. The optimisation parameters are the main modes of FANT and the geometrical characteristics of the initial surface to be treated. To determine the influence of the selected factors on the indicators characterising the quality of the antifriction coating, a central composite plan matrix was implemented, which allowed us to obtain mathematical models of the influence of factors on the adopted response functions. The processing of the experimental data was carried out using the STATISTICA 12.0 software package. As a result of the multifactorial experiment, statistical models were obtained that allow assessing the impact of the studied factors on the optimisation criteria. The significance of the obtained coefficients was checked using the Student's criterion, and the adequacy of the obtained equations was checked using the Fisher's criterion. A detailed analysis of the Pareto map and tabular results of the experiment allowed to establish the influence of the research factors on the optimisation criteria. The obtained mathematical models made it possible to determine the optimal combination of technological factors that ensure the quality of the coating, as well as to establish the rational values of FANT modes and geometric characteristics of the output surface. Keywords antifriction coating, cylinder liners, automotive and tractor engines, coating quality, multicriteria optimisation, technological parameters, geometric characteristics of the surface Full Text: PDF References 1. Schepetov, V.V., Kharchenko, O.V. & Kharchenko, S.D. (2022). Znosostijki zakhysni pokryttia [Wear-resistant protective coatings]. Naukova dumka [in Ukrainian]. 2. Nemyrovskyi, Y., Shepelenko, I. & Medvedieva, O. (2020). Improving the Durability of Agricultural Machinery Parts by Applying Antifriction Coatings. Acta Scientific Agriculture, Vol. 4, No 5. P. 46–57. https://actascientific.com/ASAG/ASAG-04-0840.php [in English]. 3. Shepelenko, I., Posviatenko, E., & Cherkun, V. (2019). The mechanism of formation of anti-friction coatings by employing friction-mechanical method. Problems of Tribology, 24(1/91), 35–39. https://doi.org/10.31891/2079-1372-2019-91-1-35-39 [in English]. 4. Chernovol, Mykhailo, Shepelenko, Igor & Budar Mohamed R.F. (2015). Effectiveness increase in application of FANT of the components of mobile agricultural machines. Zahalnoderzhavnyi mizhvidomchyi naukovo-tekhnichnyi zbirnyk «Konstruiuvannia, vyrobnytstvo ta ekspluatatsiia silskohospodarskykh mashyn». 45(1), 10-13. https://dspace.kntu.kr.ua/handle/123456789/2128 [in English]. 5. Solovykh, Ye.K. (2013). Naukovo-metodolohichni osnovy pidvyschennia nesuchoi zdatnosti funktsional'nykh pokryttiv konstruktyvnymy ta tekhnolohichnymy metodamy [Scientific and methodological bases of increasing the bearing capacity of functional coatings by constructive and technological methods]. Extended abstract of a doctoral thesis. Kyiv [in Ukrainian]. 6. Abdullah Rasheed A., Shepelenko, Ihor & Posviatyenko, Eduard (2020). Experimental quality improvement of the application of antifriction coating. First International Conference on Advances in Physical Sciences and Materials 13-14 August 2020, Coimbatore, India. Journal of Physics: Conference Series, Vol. 1706. рр.1–11. https://iopscience.iop.org/article/10.1088/1742-6596/1706/1/012187 [in English]. 7. Shepelenko, I., Tsekhanov, Y., Nemyrovskyi, Y. & Posviatenko, E. (2020). Improving the Efficiency of Antifriction Coatings by Means of Finishing the Antifriction Non-abrasive Treatment. In: Tonkonogyi, V., et al. Advanced Manufacturing Processes. InterPartner 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-40724-7_30 [in English]. 8. Shepelenko, I. et al. Modeling of contact interaction of microroughnesses of treated surfaces during finishing anti-friction non-abrasive treatment FANT. Mechatronic Systems 2. Routledge, 2021. 237–246. https://ir.lib.vntu.edu.ua/bitstream/handle/123456789/37245/106488.pdf?sequence=2&isAllowed=y [in English]. 9. Shepelenko, I.V. et al. (2022). Zmina shorstkosti poverkhni pry nanesenni antyfryktsiinykh pokryttiv [Changes in surface roughness when applying anti-friction coatings]. Zahalnoderzhavnyi mizhvidomchyi naukovo-tekhnichnyi zbirnyk «Konstruiuvannia, vyrobnytstvo ta ekspluatatsiia silskohospodarskykh mashyn», 52, 156–165. http://zbirniksgm.kntu.kr.ua/pdf/52/18.pdf [in Ukrainian]. 10. Sun, H., Tan, W., Ruan, Y. et al. (2023). Surface roughness classification using light scattering matrix and deep learning. Sci. China Technol. Sci. https://doi.org/10.1007/s11431-023-2545-8 [in English]. 11. Shepelenko, I.V. (2021). Naukovi osnovy tekhnolohii nanesennia antyfryktsijnykh pokryttiv z vykorystanniam plastychnoho deformuvannia [Scientific basis of the technology of applying antifriction coatings using plastic deformation]. Extended abstract of a doctoral thesis. Kyiv [in Ukrainian]. 12. Shepelenko, I. (2021). Technological factors influence on the antifriction coatings quality. Problems of Tribology, 26(2/100), 50–57. https://doi.org/10.31891/2079-1372-2021-100-2-50-57 [in English]. 13. Shepelenko, I. (2020). The study of surface roughness in the process of finishing anti-friction non-abrasive treatment. Problems of Tribology, 25(1/95), 34–40. https://doi.org/10.31891/2079-1372-2020-95-1-34-40 [in English]. 14. Shepelenko, I., Nemyrovskyi, Y., Stepchyn, Y., Mahopets, S. & Melnyk, O. (2024). Creation of a Combined Technology for Processing Parts Based on the Application of an Antifriction Coating and Deforming Broaching. In: Tonkonogyi, V., Ivanov, V., Trojanowska, J., Oborskyi, G., Pavlenko, I. (eds) Advanced Manufacturing Processes V. InterPartner 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-42778-7_19 [in English]. 15. Shepelenko, I.V., Tsekhanov, Yu.O. & Nemyrovs'kyj, Ya.B. (2020). Doslidzhennia mikrorizannia v protsesi finishnoi antyfryktsijnoi bezabrazyvnoi obrobky [Investigation of microneedling in the process of antifriction finishing without abrasive treatment]. Progressive technologies in mechanical engineering - 2020: IX Mizhnarodna naukovo-tekhnichna konferentsiia (3 – 7 liutoho 2020 r.) - IX International scientific and technical conference (pp.162–164). Lviv: Plai [in Ukrainian]. 16. Shepelenko, I., Tsekhanov, Yu., Nemyrovskyi, Ya., Posvyatenko, E. & Eremin, P. (2019). Simulation of micro-cutting in the process of finishing anti-friction non-abrasive treatment. Ukrainian Journal of Mechanical Engineering and Materials Science, 5, 2, 43-52. https://doi.org/10.23939/ujmems2019.02.043 [in English]. 17. Shepelenko, I.V., Nemyrovs'kyj, Ya.B. & Posviatenko, E.K. (2022). Pidvyschennia iakosti antyfryktsijnykh pokryttiv z vykorystanniam plastychnoho deformuvannia [Improving the quality of anti-friction coatings using plastic deformation]. Mechanics and Advanced Technologies, 6, 1, 24–30. https://doi.org/10.20535/2521-1943.2022.6.1.255655 [in Ukrainian]. 18. Shepelenko, I., Cherkun, V. & Warouma, A. (2014). Improvement of finishing antifriction treatment without abrasive of the rubbing parts surfaces of agricultural machineries. Int J Agric Res Innov Technol, 4(1): 98–101. https://ageconsearch.umn.edu/record/305359/ [in English]. 19. Nemyrovskyi, Y., Shepelenko, I., Posviatenko, E., Chernovol, M., & Zlatopolskiy, F. (2022). Creation of progressive hole processing processes based on the study of contact phenomena during deforming broaching and finishing antifriction non-abrasive treatment in various technological environments. Problems of Tribology, 27(1/103), 14–25. https://doi.org/10.31891/2079-1372-2022-103-1-14-25 [in English]. 20. Nemyrovskyi, Ya., Shepelenko, I., Osin, R. & Posviatenko, E. (2022). Improving the processing quality of cylinder liners using combined technology. Cutting and Tools in Technological Systems, 96: 121–130. http://rits.khpi.edu.ua/article/view/252506 [in English]. 21. Kosiiuk, M.M., Kostiuk, S.A. & Kostiuk, M.A. (2018). Tekhnolohichne zabezpechennia nanesennia antyfryktsijnoho pokryttia na nepovni sferychni poverkhni fryktsijno-mekhanichnym sposobom [Technological support for the application of antifriction coating on incomplete spherical surfaces by friction-mechanical method]. Visnyk Khmelnytskoho natsionalnoho universytetu. Tekhnichni nauky - Bulletin of the Khmelnytskyi National University. Technical sciences, 4, 38–42. https://elar.khmnu.edu.ua/items/e3f20be0-836d-4efe-8c35-008bf12fe62c [in Ukrainian]. 22. Solovykh, E.K., Lyashenko, B.A., Dmitriev, Yu.V. & Borisov, Yu.S. (2008). Optimization of the procedure of plasma spraying of erosion-resistant coatings according to strength criteria. Strength of Materials, Vol. 40, Issue 6. P. 699–710 [in English]. 23. Klymenko, A., Anisimov, V. & Sytar, V. (2020). Rozrobka tonkosharovykh pokryttiv na osnovi fenilonu dlia zakhystu poverkhon' vid hazo- ta hidroabrazyvnoho znoshuvannia [Development of thin-layer coatings based on phenylene to protect surfaces from gas and water abrasion]. Tekhnichni nauky ta tekhnolohii - Technical sciences and technologies, 4 (22), 28–34. http://tst.stu.cn.ua/article/view/227170/227173 [in Ukrainian]. 24. Shepelenko, I.V., Hutsul, V.I. & Mahopets', M.S. (2022). Osoblyvosti rozrakhunku napruzheno-deformovanoho stanu antyfryktsijnykh pokryttiv [Features of calculation of the stress-strain state of antifriction coatings]. Comprehensive quality assurance of technological processes and systems (KZYATPS - 2022): ХІІ Mizhnarodnа naukovo-praktychnа konferentsiia (26–27 travnia 2022 r.) - XII International Scientific and Practical Conference (рр. 104–105). Chernihiv [in Ukrainian]. 25. Shepelenko, I., Nemyrovskyi, Y., Lizunkov, O., Vasylenko, I. & Osin, R. (2023). The Stress-Deformed State of the Cylinder Liner’s Working Surface. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Rauch, E., Piteľ, J. (eds) Advances in Design, Simulation and Manufacturing VI. DSMIE 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-32767-4_33 [in English]. 26. Solovykh, E., Shepelenko, I., Chernovol, M., Shumliakivsky, V., Solovuch, A. & Katerynych, S. (2023). Multicriteria optimization of heat-resistant coatings detonation spraying technology. Problems of Tribology, 28(4/110), 36–43. https://doi.org/10.31891/2079-1372-2023-110-4-36-4 [in English]. 27. Veselivska, H.H., Student, M.M., Posuvailo, V.M. et al. (2023). Electrochemical Properties of Plasma-Electrolytically Oxidized Aluminum Coatings Sprayed on MA5 Magnesium Alloy. Mater Sci 59, 49–55 https://doi.org/10.1007/s11003-023-00742-x [in English]. 28. Tian, N., Zhou, S., Zhang, C. et al. (2023). Effect of High-Current Pulsed Electron Beam Irradiation on the Microstructure and Mechanical Properties of Multilayered TiN/TiCN/Al2O3 Coatings. J. of Materi Eng and Perform https://doi.org/10.1007/s11665-023-08723-6 [in English]. 29. Solovykh, E., Shepelenko, I., Solovuch, A., & Katerynych, S. (2022). Features of ion nitriding technology multicriteria optimization. Problems of Tribology, Vol. 27, № 27(4/106), P. 13–18. https://doi.org/10.31891/2079-1372-2022-106-4-13-18 [in English]. 30. Shepelenko, I.V., Drieiev, O.M. & Mokhamed Budar R.F. (2020). Vyznachennia iakosti metalevykh pokryttiv [Determining the quality of metal coatings]. Youth and technical progress in agriculture. Innovative developments in the agricultural sector: Mizhnarodnа naukovo-praktychnа konferentsiia (07 – 08 travnia 2020 r.) - International Scientific and Practical Conference (рр. 298–299). Kharkiv: KhNTUSH [in Ukrainian]. 31. Shepelenko, I.V., Nemyrovs'kyj, Ya.B. & Posviatenko, E.K. (2020). Intensyfikatsiia protsesu nanesennia antyfryktsijnykh pokryttiv [Intensification of the process of applying anti-friction coatings]. Progressive engineering, technology and engineering education: ХХІ Mizhnarodna naukovo-tekhnichna konferentsiia (06 – 09 zhovtnia 2020 r.) - International scientific and technical conference (рр. 94-96), Kyiv: KPI [in Ukrainian]. 32. Vasylkovska, K.V., Leshchenko, S.M., Vasylkovskyi, O.M. & Petrenko, D.I. (2016). Improvement of equipment for basic tillage and sowing as initial stage of harvest forecasting. INMATEH – Agricultural Engineerin, Vol. 50, Issue 3. Р. 13–20 [in English]. 33. Shepelenko, I., Nemyrovskyi, Y., Tsekhanov, Y., Posviatenko, E. & Sardak, S. (2020). Power Parameters of Micro-cutting During Finishing Anti-friction Non-abrasive Treatment. In: Karabegović, I. (eds) New Technologies, Development and Application III. NT 2020. Lecture Notes in Networks and Systems, Vol. 128. Springer, Cham. https://doi.org/10.1007/978-3-030-46817-0_22 [in English]. Citations 1. Щепетов В.В., Харченко О.В., Харченко С.Д. Зносостійкі захисні покриття: за ред. чл.-кор. НАН України В.П. Бабака. Наукова думка, 2022. 122 с. 2. Nemyrovskyi Y., Shepelenko I., Medvedieva O. Improving the Durability of Agricultural Machinery Parts by Applying Antifriction Coatings. Acta Scientific Agriculture. 2020. Vol. 4. № 5. Р. 46–57. https://actascientific.com/ASAG/ASAG-04-0840.php 3. Shepelenko I., Posviatenko E., Cherkun V. The mechanism of formation of anti-friction coatings by employing friction-mechanical method. Problems of Tribology. 2019. 24(1/91), 35–39. https://doi.org/10.31891/2079-1372-2019-91-1-35-39 4. Mykhailo Chernovol, Shepelenko Igor, Budar Mohamed R.F. Effectiveness increase in application of FANT of the components of mobile agricultural machines. Загальнодержавний міжвідомчий науково-технічний збірник «Конструювання, виробництво та експлуатація сільськогосподарських машин». 2015. Вип. 45(1). С. 10–13. https://dspace.kntu.kr.ua/handle/123456789/2128 5. Солових Є.К. Науково-методологічні основи підвищення несучої здатності функціональних покриттів конструктивними та технологічними методами: автореф. дис. докт. техн. наук: 05.03.07. Київ, 2013. 36 с. 6. Abdullah Rasheed A, Ihor Shepelenko, Eduard Posviatyenko. Experimental quality improvement of the application of antifriction coating. First International Conference on Advances in Physical Sciences and Materials 13-14 August 2020, Coimbatore, India. Journal of Physics: Conference Series, 2020. Vol. 1706. рр.1–11. https://iopscience.iop.org/article/10.1088/1742-6596/1706/1/012187 7. Shepelenko I., Tsekhanov Y., Nemyrovskyi Y., Posviatenko E. Improving the Efficiency of Antifriction Coatings by Means of Finishing the Antifriction Non-abrasive Treatment. In: Tonkonogyi, V., et al. Advanced Manufacturing Processes. InterPartner 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. 2020. https://doi.org/10.1007/978-3-030-40724-7_30 8. Shepelenko I. et al. Modeling of contact interaction of microroughnesses of treated surfaces during finishing anti-friction non-abrasive treatment FANT. Mechatronic Systems 2. Routledge, 2021. 237–246. https://ir.lib.vntu.edu.ua/bitstream/handle/123456789/37245/106488.pdf?sequence=2&isAllowed=y 9....

31 March 2025 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
ISIhor Shepelenko
Ihor Shepelenko
AKArtem Krasota
Artem Krasota
MKMykhailo Krasota
Mykhailo Krasota
Igor Shepelenko, Professor, Doctor in Technics (Doctor of Technic Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: kntucpfzk@gmail.com, ORCID ID: 0000-0003-1251-1687 Artem Krasota, post-graduate, Центральноукраїнський національний технічний університет, м. Кропивницький, Україна Mykhailo Krasota, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: krasotamv@ukr.net, ORCID ID: 0000-0001-6879-7624 The article deals with the issue of increasing the durability of the camshaft of an internal combustion engine by improving the operational properties of cams. It is determined that by studying the stress-strain state of individual elements of a part, it is possible to solve a number of technological problems. Taking into account that in most cases the destruction of a part begins from its surface, the stress-strain state of the surface layer has a significant impact on the operational properties of parts. The study of the parameters of the stress-strain state on the working surface of the cam of the camshaft of an internal combustion engine was carried out by modelling using the finite element method. The model takes into account the design features of the camshaft, the operating conditions of the cam-pusher connection, and the forces acting in the gas distribution mechanism at the moment of valve opening. To adequately reproduce the loads in the details of the studied assembly, a finite element model of the camshaft was created, with the camshaft journals in contact with the bushings and the cams in contact with one of the pushrods. The calculation results confirmed that it is in the cam-pusher contact zone that the maximum stress values are observed. To determine the ways to improve the operational properties of the working surfaces of cams, the parameters of the stress-strain state of the base cam and the cam with an antifriction coating applied by finishing antifriction non-abrasive treatment were investigated. It was found that the maximum stress is about 60 MPa for the uncoated cam and about 37 MPa for the cams with antifriction coatings. In addition, a change in the shape of the diagram was recorded: in the cams with antifriction coatings, the stresses are more evenly applied in the contact patch. The improvement in the stress state of the cams can be explained by the presence of an antifriction coating, which reduces not only the friction coefficient but also serves as a solid lubricant. The obtained regularities allow us to assert the expediency of finishing antifriction non-abrasive treatment of cams when solving the issue of increasing the durability of the camshaft.

26 May 2025 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
ISIhor Shepelenko
Ihor Shepelenko
AKArtem Krasota
Artem Krasota
VGVasiliy Gutsul
Vasiliy Gutsul
MKMykhailo Krasota
Mykhailo Krasota
Ihor Shepelenko, Professor, Doctor of Technical Science, professor of the Department of Exploitation and repairing machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, https://orcid.org/0000-0003-1251-1687, e-mail: kntucpfzk@gmail.com Artem Krasota, PhD student in Industrial Engineering, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0009-0007-7700-9176, e-mail: kras.365@gmail.com Vasiliy Gutsul, Associate Professor, Candidate of Technical Sciences, Associate Professor of the Department of Higher Mathematics and Physics, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0000-0003-4155-5355, e-mail: vigutsul@ukr.net Mykhailo Krasota, Associate Professor, Candidate of Technical Sciences, associate professor of the Department of Exploitation and repairing machines, Central Ukrainian National Technical University, Kropyvnytskyi, Ukraine, ORCID: https://orcid.org/0000-0001-8791-3264, e-mail: krasotamv@ukr.net An analysis of traditional friction-mechanical antifriction coating application schemes, as well as devices for their implementation, have shown their effectiveness in treating surfaces of parts with the shape of a body of revolution. However, for machining complex profile surfaces, which include camshaft cams, the use of such schemes is unacceptable due to the lack of stable contact between the tool and the part. The aim of the presented work is to substantiate the design and develop a device for finishing antifriction non-abrasive machining of camshaft cams by friction-mechanical method. The ways to achieve the goal are determined - to provide the necessary trajectory of movement of the tool or part, which copies the shape of the cam and creates the necessary conditions for the qualitative implementation of the selective transfer of antifriction material to the working surface of the part. This can be achieved through the use of a lever-type tool loading scheme that ensures a constant tool pressure force on the cam surface, taking into account its geometry. The proposed approach made it possible to develop the design of a device for applying antifriction coatings with a finishing antifriction non-abrasive treatment to the working surface of camshaft cams. Another approach to solving this problem is to use the design of a device containing copying and rubbing units. The presence of copiers in the proposed device ensures the creation of reciprocating and rotational movement of the tool along a trajectory corresponding to the shape of the cam with the required stable force. The justification of the device designs allows us to assert the possibility of providing high-quality conditions for the finishing antifriction non-abrasive machining of camshaft cams. Experimental studies that require the manufacture of the device and testing in laboratory or production conditions will allow you to choose the most effective design from the two options.

25 March 2024 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
MKMykhailo Krasota
Mykhailo Krasota
YKYuriy Kuleshkov
Yuriy Kuleshkov
ISIhor Shepelenko
Ihor Shepelenko
RORuslan Osin
Ruslan Osin
TRTimofey Rudenko
Timofey Rudenko
Mykhailo Krasota, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: krasotamv@ukr.net, ORCID ID: 0000-0001-6879-7624 Yuriy Kuleshkov, Professor, Doctor in Technics (Doctor of Technic Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: kul090455@gmail.com, ORCID ID: 0000-0001-6492-6919 Igor Shepelenko, Professor, Doctor in Technics (Doctor of Technic Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: kntucpfzk@gmail.com, ORCID ID: 0000-0003-1251-1687 Ruslan Osin, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: ruslan_osin@ukr.net, ORCID ID: 0000-0002-8927-5363 Timofey Rudenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: r-t-v@mail.ua, ORCID ID: 0000-0001-6879-7624 The purpose of this study is to find ways to reduce production time spent on diagnostic operations during maintenance or repair of electronic control systems (ECS) in automotive vehicles. Existing methods of diagnosing engine control systems in vehicles are sufficiently effective, but in most cases, they require highly skilled personnel, the use of additional complex and expensive equipment, prolonged service cycles, which in turn increases the complexity of maintenance, and also does not provide for prior prediction of faults and system failures. Analysis of scientific publications has shown that to reduce the time for maintenance and repair of electronic systems, it is necessary to predict the residual life of ECS components in vehicles during maintenance, to further reduce the labor intensity of diagnostics and current repairs. In other words, diagnostics performed during maintenance or repair should include predicting the residual life of electronic system components. For the most critical ECS components in vehicles, it is proposed to apply a strategy of replacing them upon reaching a certain mileage, rather than upon failure. This organization method will reduce vehicle downtime in repair and reduce the time to troubleshoot ECS component failures. A method has been proposed for identifying design elements that limit the reliability of the ECS, taking into account the degree of influence of their failures on the engine's technical and economic characteristics and the cost of restoring its performance. The availability of such information is the basis of the ECS maintainability support system. An algorithm has been developed to search for hidden faults in the components of ECS subsystems, which includes predicting the failure of ECS components. This will help reduce the labor intensity of diagnostic operations during maintenance and repair.

1 October 2020 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
CUCentral Ukrainian National Technical University
Central Ukrainian National Technical University
VAViktor Aulin
Viktor Aulin
IVIvan Vasylenko
Ivan Vasylenko
MKMykhailo Krasota
Mykhailo Krasota
Viktor Aulin, Professor, Doctor in Technics (Doctor of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine Ivan Vasylenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine Mykhailo Krasota, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine Abstract A number of parts of car systems and units in the process of operation are subject to intensive wear and fatigue processes, and therefore do not withstand the planned service life. An important reserve for increasing the reliability and efficiency of such equipment is the strengthening of the working surfaces of its parts with composite materials and coatings. This method of strengthening makes it possible, controlling the structure of composite materials and coatings, to form the necessary set of performance properties of parts to ensure the appropriate level of reliability and increase durability. However, this requires theoretical justification to establish a correspondence between the structure, composition, distribution of chemical elements applied to the parts of the composite coating and their performance properties, such as wear resistance, fatigue strength, etc. The purpose of this work is a theoretical justification for the use of the method of cluster components to determine and form a set of necessary performance properties that ensure reliable and efficient operation of parts of systems and units of cars. The article theoretically substantiates the operational properties of automobile parts hardened with composite coatings using the method of cluster components. By choosing certain sets of parameters, as well as varying the system of restrictions on them, it is possible to form a complex of operational properties of parts. To simplify the packing model for composite materials and coatings, it is assumed that fillers of different compositions have an isometric shape and the same size. A regular structure is proposed, corresponding to the packing of spheres of the same size. It is shown that such packings form lattices similar to atomic crystal structures. The dependences of the function of the properties of composite coatings on the content of each of the types of cluster components are revealed. The method of cluster components, describing changes in the properties of composite coatings from the ratio of components, makes it possible to control a set of operational properties and obtain high-quality coatings to increase the durability of parts of systems and vehicle units. As a result of the conducted researches it is offered to consider composite coverings and composite materials as the systems characterized by a certain complex of operational properties depending on filler content and regularity of structure. According to the theory of cluster components, the content of the component determines the parameters and properties of composite coatings and materials. The method of cluster components makes it possible to present a set of operational properties as an additive model of its components. The packaging of components in composite coatings and materials is represented by atomic crystal structures: simple cubic, volume-centered cubic, face-centered cubic and hexagonal densely packed. The implementation of the method of cluster components on the example of a binary system of components A and B is considered. The basic configuration in accordance with the approximations of the statistical ordering theory is chosen. The visual interpretation and physical content of a mixture of powders, components of composite coatings and materials, particles A and B are given. The configurational entropy and formation of cluster components of the intermediate composition AB along with the basic AA and BB are considered. Based on the π-theorem, a complete set of quasi-chemical reactions is outlined. For binary composite coatings and materials АСВ1-С the matrices of size and relative content of components are constructed, the quasi-chemical formalism of the method of cluster components and the law of active masses for volume-centered cubic lattice are used. This is taken into account when building functional models of operational properties. Their specification on the criterion of correctness is carried out. A number of parts of car systems and units in the process of operation are subject to intensive wear and fatigue processes, and therefore do not withstand the planned service life. An important reserve for increasing the reliability and efficiency of such equipment is the strengthening of the working surfaces of its parts with composite materials and coatings. This method of strengthening makes it possible, controlling the structure of composite materials and coatings, to form the necessary set of performance properties of parts to ensure the appropriate level of reliability and increase durability. However, this requires theoretical justification to establish a correspondence between the structure, composition, distribution of chemical elements applied to the parts of the composite coating and their performance properties, such as wear resistance, fatigue strength, etc. The purpose of this work is a theoretical justification for the use of the method of cluster components to determine and form a set of necessary performance properties that ensure reliable and efficient operation of parts of systems and units of cars. The article theoretically substantiates the operational properties of automobile parts hardened with composite coatings using the method of cluster components. By choosing certain sets of parameters, as well as varying the system of restrictions on them, it is possible to form a complex of operational properties of parts. To simplify the packing model for composite materials and coatings, it is assumed that fillers of different compositions have an isometric shape and the same size. A regular structure is proposed, corresponding to the packing of spheres of the same size. It is shown that such packings form lattices similar to atomic crystal structures. The dependences of the function of the properties of composite coatings on the content of each of the types of cluster components are revealed. The method of cluster components, describing changes in the properties of composite coatings from the ratio of components, makes it possible to control a set of operational properties and obtain high-quality coatings to increase the durability of parts of systems and vehicle units. As a result of the conducted researches it is offered to consider composite coverings and composite materials as the systems characterized by a certain complex of operational properties depending on filler content and regularity of structure. According to the theory of cluster components, the content of the component determines the parameters and properties of composite coatings and materials. The method of cluster components makes it possible to present a set of operational properties as an additive model of its components. The packaging of components in composite coatings and materials is represented by atomic crystal structures: simple cubic, volume-centered cubic, face-centered cubic and hexagonal densely packed. The implementation of the method of cluster components on the example of a binary system of components A and B is considered. The basic configuration in accordance with the approximations of the statistical ordering theory is chosen. The visual interpretation and physical content of a mixture of powders, components of composite coatings and materials, particles A and B are given. The configurational entropy and formation of cluster components of the intermediate composition AB along with the basic AA and BB are considered. Based on the π-theorem, a complete set of quasi-chemical reactions is outlined. For binary composite coatings and materials АСВ1-С the matrices of size and relative content of components are constructed, the quasi-chemical formalism of the method of cluster components and the law of active masses for volume-centered cubic lattice are used. This is taken into account when building functional models of operational properties. Their specification on the criterion of correctness is carried out. Keywords composite coating, cluster component, packing, performance properties Full Text: PDF References 1. Aulin, V.V. (2006). Znosostiikist heterohennykh kompozytsiinykh materialiv ta pokryttiv v umovakh abrazyvnoho znoshuvannia. [Wear resistance of heterogeneous composite materials and coatings under conditions of abrasive wear]. Praci Tavrijskoyi derzhavnoyi agrotehnichnoyi akademiyi – Works of the Tavriya State Agrotechnical Academy, 39, 38-43 [in Ukrainian]. 2. Aulin, V.V. (2003). Abrazyvna znosostiikist lazerno-modyfikovanykh kompozytsiinykh pokryt [Abrasive wear resistance of laser-modified composite coatings]. Zbirnyk naukovykh prats KDTU. Tehnika v silskogospodarskomu virobnictvi, galuzeve mashinobuduvannya, avtomatizaciya – Collection of scientific works of KSTU. Machinery in agricultural production, industrial engineering, automation, 12, 219-223 [in Ukrainian]. 3. Aulin, V.V., Bobrickij, V.M., & Batyehin, V.B. (2005). Vikoristannya koncentrovanih potokiv energiyi pri formuvanni lokalnih zmicnenih zon ta kompozicijnih pokrittiv na detalyah mashin [The use of concentrated energy flows in the formation of local reinforced zones and composite coatings on machine parts]. Mashinostroenie i tehnosfera XXI veka. Sb. trudov XII mezhdunar. nauchn.-tehn. konf. v g. Sevastopole 12-17 sentyabrya 2005 – Mechanical engineering and technosphere of the XXI century. Sat. Proceedings of the XII International. scientific and technical conf. in Sevastopol, September 12-17, 2005, 1, 30-31.Donetsk: DonSTU [in Ukrainian]. 4. Aulin, V.V., Bobrickij, V.M., & Zlatopolskij, F.J. (2005). Vpliv na znosostijkist kompozicijnih materialiv procesiv, shcho protikayut na mezhi yih skladovih [Influence on wear resistance of composite materials of the processes proceeding on the border of their components]. Inzheneriya poverhnosti i renovaciya izdelij. Materialy 4-j mezhdunarodnoj nauchn.-tehn. konf., 24-26 maya 2005, g. Yalta – . Surface engineering and product renovation. Materials of the 4th international scientific and technical. Conf., May 24-26, 2005, Yalta (pp. 289-291). K.: ATM of Ukraine [in Ukrainian]. 5. Aulin, V.V. (2003). Stvorennia kompozytsiinykh dyspersno-zmitsnenykh pokryttiv na detaliakh SHT z vykorystanniam lazernoho vyprominiuvannia [Creation of composite disperse-strengthened coatings on details of agricultural machinery using laser radiation] Konstruyuvannya, virobnictvo ta ekspluataciya silskogospodarskih mashin – Design, manufacture and operation of agricultural machinery, 33, 310-316 [in Ukrainian]. 6. Chernovol, M.I., Aulin, V.V., & Solovyh, E.K.(2003). Vosstanovlenie detalej selskohozyajstvennoj tehniki kompozicionnymi materialami s primeneniem lazernogo izlucheniya [Restoration of parts of agricultural machinery with composite materials using laser radiation]. Svarka. Kontrol. Renovaciya – 2003. Trudy tretej mezhdunarodnoj nauchn.-tehn. konf. (g. Ufa, 27-31 oktyabrya 2003 g.) – Welding. Control. Renovation - 2003. Proceedings of the third international scientific and technical. conf. (Ufa, October 27-31, 2003) 308-313 [in Russian]. 7. Chernovol, M.I., & Aulin, V.V. (2005) Uprochnenie detalej mashin kompozicionnymi pokrytiyami [Reinforcement of machine parts with composite coatings]. AFES2005 Proceeding. The sixth international scientific forum aims for future of engineering science. – march 23-30. 2005, 86-91 Hong-Kong [in Russian]. 8. Aulin, V.V., Bobrickij, V.M., & Zlatopolskij, F.J. (2005). Vpliv na znosostijkist kompozicijnih materialiv procesiv, shcho protikayut na mezhi yih skladovih [Influence on wear resistance of composite materials of the processes proceeding on the border of their components]. Inzheneriya poverhnosti i renovaciya izdelij. Materialy 4-j mezhdunarodnoj nauchn.-tehn. konf., 24-26 maya 2005, g. Yalta – . Surface engineering and product renovation. Materials of the 4th international scientific and technical. Conf., May 24-26, 2005, Yalta (pp. 289-291). K.: ATM of Ukraine [in Ukrainian]. 9. Aulin, V.V. (2006). Vplyv kharakterystyk komponentiv kontaktuiuchykh kompozytsiinykh materialiv i pokryttiv na parametry ta vlastyvosti zony tertia [Influence of characteristics of components of contacting composite materials and coatings on parameters and properties of friction zone]. Problemi tribologiyi (Problems of tribology), 4 (42), 110-112 [in Ukrainian]. 10. Aulin, V.V. (2003). Trybotekhnichni vlastyvosti deiakykh kompozytsiinykh pokryttiv [Tribotechnical properties of some composite coatings]. Visnyk HDGUSG. Pidvishennya nadijnosti vidnovlenih detalej mashin – Bulletin of HSTUAC. Improving the reliability of restored machine parts, 14, 170-174 [in Ukrainian]. 11. Kanovich, M.Z., & Trofimov, N.N.(2003). Soprotivlenie kompozicionnyh materialov: monografiya [Resistance of Composite Materials: Monograph]. M.: Mir [in Russian] 12. Savulyak, V.I. (2004). Naukovi zasady formuvannia na splavakh zaliza kompozytsiinykh metalokarbidnykh shariv zi stabilnymy strukturamy ta pidvyshchenymy trybotekhnichnymy kharakterystykamy [Scientific bases of formation on iron alloys of composite metal-carbide layers with stable structures and the raised tribotechnical characteristics]. Extended abstract of Doctor’s thesis. K. [in Ukrainian]. 13. Aulin, V.V., Solovih, Ye.K., Bobrickij, V.M., & Zhulaj, O.Yu. (2006). Modelyuvannya procesiv formuvannya strukturozalezhnih vlastivostej pri proektuvanni kompozicijnih materialiv i pokrittiv [Modeling of processes of formation of structure-dependent properties at designing of composite materials and coverings]. Sbornik trudov XIII Mezhdunarodnoj nauchn.-tehn. konf. 11-16 sentyabrya 2006 g. v Sevastopole – Collection of works of the XIII International scientific and technical conf. September 11-16, 2006 in Sevastopol, Vol. 5, 231-239. Donetsk: DonSTU [in Ukrainian]. 14. Aulin, V.V., & Bisyuk, V.A. (2010). Prohramno-tekhnichni zasoby avtomatyzovanoi systemy keruvannia tekhnolohichnym protsesom zmitsnennia detalei kompozytsiinymy materialamy [Software and hardware of the automated control system of technological process of strengthening of details by composite materials]. Integrovani intelektualni roboto-tehnichni kompleksy (IIRTK 2010). Tretya mizhnarodna nauk.-prakt. konf. 24-26 travnya 2010 roku, Kiyiv, Ukrayina – Integrated intelligent robotic systems (ІІРТК 2010). The third international scientific-practical. conf. May 24-26, 2010, Kyiv, Ukraine, 143-145 [in Ukrainian]. 15. Aulin, V.V., Chernovol, M.I., & Bisyuk, V.A. et al. (2010). Pat. 47581 Ukrayina. Sposib avtomatizaciyi keruvannya temperaturoyu naplavlennya kompozicijnogo pokrittya [Patent 47581 Ukraine, Method of automation of temperature control of surfacing of composite coating]. №u200909294; 10.02.2010; Statement №3 [in Ukrainian]. 16. Aulin, V.V., Bisyuk, V.A., Vihrova, L.G., & Bobrickij, V.M. (2005). Pat. № 8907 Ukrayina. Sposib bagatokomponentnogo dozuvannya sipkogo materialu [Patent № 8907 Ukraine. Method of multicomponent dosing of bulk material] №u200502779; 15.08.2005; Statement №8 [in Ukrainian]. 17. Chernovol, M.I., Aulin, V.V., & Bisyuk, V.A. (2012). Zalezhnist yakosti vid kerovanykh parametriv indukcijnogo naplavlennya zmicnyuyuchikh kompozicijnykh pokryttiv [Dependence of quality on controlled parameters of induction surfacing of reinforcing composite coating]. Integrovani intelektualni robototehnichni kompleksi (IIRTK-2012). Tezi p'yatoyi mizhnar. nauk.-prakt. konf. 15-16 travnya 2012 roku, Kiyiv, Ukrayina – Integrated intelligent robotic complexes (ІІРТК-2012). Abstracts of the Fifth International. scientific-practical conf. May 15-16, 2012, Kyiv, Ukraine, 216-218 [in Ukrainian]. 18. Aulin, V.V. (2004). Vyznachennya ob'yemnogo vmistu napovnyuvacha v antyfrykcijnomu kompozycijnomu pokritti [Determination of the bulk content of the filler in the antifriction composite coating]. Mashinoznavstvo – Mechanical Engineering, 7 (85), 49-53 [in Ukrainian]. 19. Aulin, V.V. (2006). Deyaki pitannya fizyki stvorennya ta matematychnogo modelyuvannya vlastivostej kompozycijnykh pokrittiv tribotehnichnogo pryznachennya [Some questions of physics of creation and mathematical modeling of properties of composite coverings of tribotechnical appointment]. Problemi tribologiyi (Problems of tribology) – Problems of tribology, 4 (42), 88-100 [in Ukrainian]. 20. Aulin, V.V., Zynovyk, M.A., & Dubovyk, V.O. (2007). Fizyko-himichni osnovy stvorennya kompozycijnykh materialiv trybotehnichnogo pryznachennya iz strukturoyu shpineli [Physico-chemical bases of creation of composite materials of tribotechnical appointment with structure of spinel]. Problemi tribologiyi (Problems of tribology) – Problems of tribology, 2 (44), 63-66 [in Ukrainian]. 21. Aulin, V.V. (2015). Trybofizichni osnovi pidvyshchennya znosostijkosti detalej ta robochukh organiv silskogospodarskoyi tekhniki [Tribophysical bases of increase of wear resistance of details and working bodies of agricultural machinery]. Extended abstract of Doctor’s thesis. Hmelnickij. [in Ukrainian]. 22. Vasylenko, I.F. (2014). Doslidzhennya vlastyvostei kompozytsiinykh pokryttiv, nanesenykh kontaktnym navariuvanniam poroshkovykh drotiv [Investigation of the properties of composite coatings applied by contact welding of cored wires]. Zbirnyk naukovykh prats KNTU. Tekhnika v s/h vyrobnytstvi, haluzeve mashynobuduvannia, avtomatyzatsiia – Collection of scientific works of KSTU. Machinery in agricultural production, industrial engineering, automation, 27. 60-67 [in Ukrainian]. 23. Vasylenko, I.F. (2015). Vybir materialiv poroshkovykh drotiv dlia nanesennia kompozytsiinykh pokryttiv [Selection of cored wire materials for composite coatings]. Zbirnyk naukovykh prats KNTU. Tekhnika v s/h vyrobnytstvi, haluzeve mashynobuduvannia, avtomatyzatsiia – Collection of scientific works of KNTU. Machinery in agricultural production, industrial engineering, automation, 28, 154-159 [in Ukrainian]. 24. Aulin, V.V., & Bobrytskyi, V.M. (2014). Kompiuterne modeliuvannia poliv temperatur ta napruzhen v kompozytsiinykh materialakh ta pokryttiakh pry yikh formuvanni, terti ta znoshuvanni [Computer modeling of temperature and stress fields in composite materials and coatings during their formation, friction and wear]. Zbirnyk naukovykh prats KNTU. Tekhnika v s/h vyrobnytstvi, haluzeve mashynobuduvannia, avtomatyzatsiia – Collection of scientific works of KNTU. Machinery in agricultural production, industrial engineering, automation, 27, 235-245 [in Ukrainian]. 25. Aulin, V.V. (2006). Pole napruzhen v kompozytsiinomu materiali ta kompozytsiinomu pokrytti v umovakh tertia kovzannia [Stress field in composite material and composite coating under sliding friction conditions]. Zb. nauk. prats LNAU – Collection of scientific works of LSAU, 65(88), 13-20 [in Ukrainian]. 26. Aulin, V.V. (2005) Stan pytannia teorii znosu kompozytsiinykh materialiv i pokryttiv [The state of the theory of wear of composite materials and coatings]. Visnyk KhNTUSH im. Petra Vasylenka, Tekhnichnyi servis APK, tekhnika ta tekhnolohii u silskohospodarskomu mashynobuduvanni – Bulletin of KhSTUAC. Technical service of agro-industrial complex, technics and technologies in agricultural mechanical engineering, 40, 82-87 [in Ukrainian]. 27. Chernovol, M.I., & Aulin, V.V. (2006) Fizychni osnovy stvorennia kompozytsiinykh materialiv i pokryttiv trybotekhnichnoho pryznachennia. Фізичні основи створення композиційних матеріалів і...