A. N. Shankar

A. N. Shankar

Auto-generated profile, based on publicly available information

A. N. Shankar

Department of HSE & Civil Engineering

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 October 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
ASA. N. Shankar
A. N. Shankar
VJVishal Jagota
Vishal Jagota
Nashrah Hani JamadonNashrah Hani Jamadon
Nashrah Hani Jamadon
RRR. RAFFIK
R. RAFFIK
VSV. Lakshmi Suneetha
V. Lakshmi Suneetha
LKLokanayaki Karnan
Lokanayaki Karnan
Natural fibers have emerged as an effective replacement for synthetic fibers in the fabrication of green composites to be used for producing various components in automotive, aerospace, and other applications. In this proposed study, the mechanical properties of banana and coir fiber-based green composites have been optimized by using a hybrid AHP-TOPSIS approach. Corn starch along with glycerol has been used as the matrix material for fabricating the green composites. The mechanical properties such as tensile strength, flexural strength, and impact strength of the developed green composite have been optimized with a focus on the utilization of this composite in automotive and aerospace applications. Three different weight percentages (0%, 5%, and 10%) of banana and coir fibers was considered for the fabrication of green composites. The constituents of the green composite have been taken as the input variables whereas the mechanical properties of the green composite are considered as the output variables for designing the experiment. The design of the experiment consisted of nine different combinations of input and output variables. Results of the study revealed that 5 wt.% of banana fiber, 10 wt.% of coir fiber, and 85 wt.% of corn starch provide the optimum mechanical performance of the developed green composites.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
SRS. Ragunath
S. Ragunath
ASA. N. Shankar
A. N. Shankar
MKMeena K
Meena K
BGB. Guruprasad
B. Guruprasad
MSMadhu S
Madhu S
NDNahom Daniel
Nahom Daniel
The aim of this research work was to develop the optimal mechanical properties, namely, tensile strength, flexural strength, and impact strength of sisal and glass fiber‐reinforced polymer hybrid composites. The sisal, in the form of short fiber, is randomly used as reinforcements for composite materials, which is rich in cellulose, economical, and easily available as well as glass fibers have low cost and have good mechanical properties. In addition, epoxy resin and hardener were for the fabrication of composites by compression molding. The selected materials are fabricated by compression molding in various concentrations on volume basics. The combination of material compositions is obtained from the design of experiments and optimum parameters determined by the Response Surface Methodology (RSM). From the investigation of mechanical properties, the sisal is the most significant factor and verified by ANOVA techniques. The multiobjective optimal levels of factors are obtained by LINGO analysis.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
ANA. Arun Negemiya
A. Arun Negemiya
ASA. N. Shankar
A. N. Shankar
BGB. Guruprasad
B. Guruprasad
BPB. Prakash
B. Prakash
SDS. Dineshkumar
S. Dineshkumar
RSRajakumar Selvarajan
Rajakumar Selvarajan
The diffusion bonding (DB) method is used in this investigation to connect high‐temperature dissimilar materials. The existence of difficult‐to‐remove oxide coatings on the titanium surfaces, as well as the arrangement of breakable metallic interlayers and oxide enclosures inside the bond region, provides the most significant challenges during the transition from AISI304 to Ti‐6Al‐4V alloying. In addition, an effort was made to advance DB processing maps for the operational connection of Ti‐6Al‐4V to AISI304 alloys to improve their performance. Joints had been created by combining several process factors, such as bonding temperature (T), bonding pressure (P), and holding time (t), to create diverse designs. Based on the findings, database processing maps were created. This set of processing maps may be used as a rough guideline for selecting appropriate DB process parameters for generating virtuous excellent bonds between Ti‐6Al‐4V and AISI304 alloys. The maximum lap shear strength (LSS) was achieved at 800°C, 15 MPa, and 45 min.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
MMMadhan Mohankumar
Madhan Mohankumar
ASA. N. Shankar
A. N. Shankar
TKT. S. Karthik
T. S. Karthik
RSRengaraj Saravanakumar
Rengaraj Saravanakumar
HEMAKESAVULU ORUGANTIHEMAKESAVULU ORUGANTI
HEMAKESAVULU ORUGANTI
NRN. Rakesh
N. Rakesh
This study was conducted to assess and compare the crack‐healing ability of conventional electrical sintered and microwave sintered Al2O3/x wt. % SiC (x = 5, 10, 15, and 20) structural ceramic composites. The crack‐healing ability of both conventional electrical sintered and microwave sintered specimens was studied by introducing a crack of ∼100 µm length by Vickers’s indentation and conducting a heat treatment at 1200°C for dwell time of 1 h in air. The flexural or bending strength of sintered, cracked, and crack‐healed specimens was determined by three‐point bending test, and the phase variations by X‐ray diffraction and SEM micrographs before and after crack‐healing of both the sintering methods were studied and compared. The results show that almost all the specimens recovered their strength after crack‐healing, but the strength of microwave sintered Al2O3/SiC structural ceramic composites has been shown to be better than that of conventional electrical sintered Al2O3/SiC structural ceramic composites. The microwave sintered crack‐healed Al2O3/10 wt. % SiC specimen shows higher flexural strength of 794 MPa, which was 105% when compared with conventional electrical sintered Al2O3/10 wt. % SiC and crack‐healed Al2O3/10 wt. % SiC specimen. It was found by X‐ray diffractogram that before crack‐healing, all the conventional electrical sintered samples have SiO2 phase which reduce the crack‐healing ability and microwave sintered samples with 15 and 20 wt. % SiC show lesser SiO2 phase and 5 and 10 wt. % SiC samples have no SiO2 phase before crack‐healing. However, after crack‐healing treatment, all the samples have distinct SiO2 phase along with Al2O3 and SiC phases. Microwave sintered Al2O3/10 wt. % SiC specimen cracks were fully healed which was evident in SEM micrographs.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
UKUmapathi Krishnamoorthy
Umapathi Krishnamoorthy
YSYalamanchili Sangeetha
Yalamanchili Sangeetha
ASA. N. Shankar
A. N. Shankar
PVP. Vidhyalakshmi
P. Vidhyalakshmi
RRR. Ramkumar
R. Ramkumar
DMD. Magdalinmary
D. Magdalinmary
Using carbon nanotubes for sensing the mass in a biosensor is recently proven as an emerging technology in healthcare industry. This study investigates relative frequency shifts and sensitivity studies of various biological objects such as insulin hormone, immunoglobulin G (IgG), the most abundant type of antibody, and low‐density lipoproteins (LDL) masses using the single‐wall carbon nanotubes as a biomass sensor via continuum mechanics. Uniform distributed mass is applied to the single‐wall carbon nanotube mass sensor. In this study, fixed‐free and fixed‐fixed type single‐wall carbon nanotubes with various lengths of relative frequency shifts are studied. Additionally, the sensitivity analysis of fixed‐free and fixed‐fixed type CNT biological mass sensors is carried out. Moreover, mode shapes studies are performed. The sensitivity results show better, if the length of the single‐wall carbon nanotube is reduced.