19 July 2021 in Applied Physics Letters
We report proof-of-concept experiments on an optically driven Josephson voltage standard based on a mode-locked laser (MLL), a time-division multiplexer, and a cryogenic ultrafast photodiode driving an overdamped Josephson junction array (JJA). Our optical pulse pattern generator (PPG) concept builds on the capability of MLLs to produce trains of picosecond-wide optical pulses with little amplitude and temporal spread. Our present setup enables multiplication of the original 2.3 GHz pulse repetition frequency by a factor of 8. A commercial photodiode converts the optical pulses into about 25 ps wide electrical pulses in liquid helium several cm from the JJA. Using a custom-made MLL, we can drive a JJA with a low critical current of 360 μA at multiple Shapiro steps. We have performed experiments with pulse pairs whose time interval can be set freely without distorting the shapes of individual pulses. Experimental results are in qualitative agreement with theoretical simulations, and they demonstrate, e.g., crossover in the Shapiro step pattern when the time interval between the pulses is approximately equal to the inverse of the characteristic frequency of the JJA. However, there are quantitative discrepancies, which motivate an improved integration of photodiodes and JJAs to improve both the understanding and fidelity of Josephson Arbitrary Waveform Synthesizers. Considering future quantum technologies in a wider perspective, our optical approach is a potential enabler for fast and energy-efficient pulse drive without an expensive high-bandwidth electrical PPG and without high-bandwidth electrical cables that yield too high thermal conductance between cryogenic and room temperatures.
12 January 2024 in Journal of Infrared, Millimeter, and Terahertz Waves
We have developed a cryogenic characterization platform for ultrafast photodiodes, whose time domain responses are extracted by electro-optic sampling using femtosecond laser pulses in a pump-probe configuration. The excitation of the photodiodes with the pump beam and the electro-optic sampling crystals with the probe beam are realized in a fully fiber-coupled manner. This allows us to use the characterization platform at different temperatures, ranging from cryogenic to room temperature. As an application example, we characterize the time-domain response of commercial p-i-n photodiodes with a nominal bandwidth of 20 GHz and 60 GHz at temperatures of 4 K and 300 K and in a large parameter range of photocurrent and reverse bias. For these photodiodes, we detect frequency components up to approximately 250 GHz, while the theoretical bandwidth of our sampling method exceeds 1 THz. Our measurements demonstrate a significant excitation power and temperature dependence of the photodiodes’ ultrafast time responses, reflecting, most likely, changes in carrier mobilities and electric field screening. Since our system is an ideal tool to characterize and optimize the response of fast photodiodes at cryogenic temperatures, it has a direct impact on applications in superconducting quantum technology such as the enhancement of optical links to superconducting qubits and quantum-accurate waveform generators.