8 October 2018 in IEEE Transactions on Plasma Science
This paper deals with a model that simulates an electrodeless lamp with argon/mercury chemistry. The plasma kinetics model equations were solved using COMSOL (multiphysics simulation software) with appropriate boundary conditions. The numerical modeling of inductively coupled plasma is of crucial importance to understand the behavior of different physical quantities that characterize the ionized gasses such as electrical parameters. The electric and magnetic fields were handled by the electromagnetic model using the multiturn coil method. Results are in fairly good agreement with the experimental data from the literature and fit well with the expected physics of the discharge plasma.
2 June 2020 in IEEE Transactions on Plasma Science
Inductively coupled plasma of Mercury-Argon composition was investigated using a numerical simulation based on finite elements method at low pressure (6 m torr of Hg and 300 m torr of Ar). A self-consistent model working at a frequency of 250 kHz was developed using the plasma module in Comsol Multiphysics for studying the discharge phenomena. The 3-D plasma model gives a description of the influence of some parameters that characterize the discharge such as the electron density and electron temperature for various inputs' current and frequency. The purpose of this article is to obtain the optimal operating conditions of the discharge and to show the veracity of the 3-D model taking into account some assumption used to simplify the model. The performance of the electrodeless fluorescent lamps can be depicted, which will contribute to a further optimization of the RF inductions' lamps to reduce the energy consumption.
11 February 2025 in IEEE Transactions on Industry Applications
In this work, we analyze numerically, using Comsol Multiphysics, the influence of four parameters (the power of the lamp, the ambient temperature, the angle of inclination of the lamp and the number of holes in the lamp cavity) on the evolution of the junction temperature of a LED lamp placed in a multi-hole cavity using a fractional factorial plan. Taking into account the results obtained, we optimize our model using the Minitab manipulation software. Thus, a Pareto analysis (ANOVA) is carried out and a mathematical model is deduced to estimate the junction temperature of the LED lamp as function of the controlled parameters. The different influencing factors and especially the relative amplitude of their effect on the temperature of the LED chip could thus be calculated and demonstrated. If the electric power supply of the LED remains the first factor of impact on the temperature, the other parameters as well as the number of holes, the angle of inclination or the ambient temperature could thus be prioritized in order of influence. Then an improved model is provided, and its limit with regard to the cavity's condensation detection was examined showing that the risk of water condensation inside the cavity is only detected in the case where the lamp is exposed in an extremely humid area.
31 March 2023 in Research Square
This paper investigates the kinetic study in an inductive discharge lamp. Numerical simulation of electron density and other parameters that characterize the plasma are discussed and their values are compared with what is expected in inductive plasma and which show a good agreement considering the electron density and the electron temperature values . Such research allows us to understand the relationship between the radial distribution of electronic temperature and the electrical density of the lamp and the frequency of operation. The influence of the current is presented and the performance of the lamp can be found.