1 September 2007 in International Journal of Physical Modelling in Geotechnics
Some forty years ago, when geotechnical centrifuge modelling had been rediscovered and was being developed once more after the early work of Phillips (1869), only a few studies were devoted to the questions and concerns about scaling laws and similitude conditions. During the first decades, it was relatively easy for researchers to keep themselves informed about the main outcomes of these studies and to take them into account when designing new centrifuge model tests. This is obviously not true today following the welcome growth in terms of the large number of centrifuge facilities now in operation around the world. It is increasingly difficult, but yet absolutely essential, to know about the relevant developments concerning studies into the scaling laws and, furthermore, into the limits of the domains of the use of centrifuge modelling. On the other hand, new media offers a significant opportunity to provide this resource to the physical modelling community. New topics are investigated by many researchers as they become more inventive in the ways in which geotechnical centrifuge modelling is applied to solve pressing problems within geotechnical engineering, and across other disciplines too. Innovative work presenting comparisons between centrifuge model tests and true scale tests are providing original data on the validity of the scaling factors. During the TC2 meeting at St John’s (Canada) in July 2002, the first author, J. Garnier (LCPC), suggested making an inventory of the scaling laws and similitude questions relating to centrifuge modelling. The aim of this catalogue is to present the questions already solved (with inclusion of the references of the papers where the results have been presented) and the unsolved problems (on which research should continue). The first draft of this catalogue is now available and it is hoped that it will become a useful tool for scientists and researchers involved in centrifuge modelling. Of course, this catalogue will be regularly updated, every four years during the International Conferences on Physical Modelling in Geotechnics. The latest version of the catalogue is available on the TC2 website ( www.tc2.civil.uwa.edu.au ).
1 May 2011 in Ocean Engineering
1 February 2009 in Géotechnique
This paper describes the results from a centrifuge investigation into the rate dependence of T-bar and ball penetrometer resistance in kaolin. Four T-bar diameters and two ball diameters were installed in kaolin with overconsolidation ratios of 1, 2 and 5 at penetration velocities varying over five orders of magnitude. The penetration resistances are compared with the properties of kaolin as measured in element tests to assist in the development of a framework that describes this resistance over the full velocity range. Consistent trends emerge when the soil viscosity is assumed to affect the penetration resistance in both the partially drained and undrained conditions, enabling the dependence of the T-bar and ball resistances on diameter, velocity and soil characteristics to be quantified.
1 February 2010 in Canadian Geotechnical Journal
The cylindrical T-bar penetrometer was developed for profiling the undrained strength of soft soils in the centrifuge and is now a widely-used offshore site investigation tool. The conventional interpretation of the T-bar test is to convert the measured penetration resistance to soil strength using a single bearing factor associated with steady flow of soil around the bar. This paper describes a new analysis for the interpretation of T-bar penetrometer tests at shallow embedment and in soft soils, which is an increasingly significant consideration in the design of seabed infrastructure, including pipelines. The analysis captures two mechanisms that are usually neglected: (i) soil buoyancy and (ii) the reduced bearing factor arising from the shallow failure mechanism mobilized prior to the full flow of soil around the bar. The framework derives from theoretical considerations and is calibrated using large deformation finite element analyses. The depth at which the steady deep penetration condition is reached is shown to depend on the normalized soil strength, su/γ′D, and may be up to several diameters deep. The effect of this new procedure on the inferred soil strength compared with the conventional approach is illustrated through T-bar tests in three different centrifuge samples, spanning a range of strength ratios.
1 September 2013 in Géotechnique
This paper utilises centrifuge data to explore the penetration response of dynamically installed anchors in normally consolidated clay. The data indicate that for anchors with no flukes, expected anchor tip embedment depths are two to three times the anchor length for impact velocities approaching 30 m/s, with a strong dependence on the net density of the anchor and smaller dependence on the impact velocity. Total energy, defined as the sum of the kinetic energy of the anchor at the mudline and the potential energy released as it penetrates the seabed, is shown to be a useful quantity for comparing the embedment depth of anchors with markedly different geometries and mass, impacting the soil at different velocities. The centrifuge data were used to calibrate an analytical embedment model, based on strain-rate-dependent shearing resistance and fluid mechanics drag resistance. The merit of the anchor embedment model has been demonstrated by predicting the final embedment depths for a series of offshore field trials to within 4% of the measurements.
1 May 2008 in Canadian Geotechnical Journal
Pipelines laid on the seabed expand and contract during operating cycles as a result of thermal loading, which can lead to lateral buckling. Analysis of this behaviour requires assessment of the vertical penetration and lateral breakout responses. This paper reports centrifuge modelling of these processes, using advanced image analysis techniques to observe the soil deformation. Simple mechanisms are fitted to the observed deformation patterns, allowing the mobilized soil strength to be back-calculated. The vertical embedment mechanisms closely match plasticity solutions. Even if heave is accounted for, the penetration resistance is slightly higher than calculations based on the undrained strength inferred from a T-bar penetrometer. This discrepancy can be attributed to the additional remoulding and softening during steady flow around a T-bar compared to shallow pipe penetration. The lateral breakout response is brittle, and the peak resistance is governed by the available tensile resistance behind the pipe. During steady lateral sweeping the pipe rises close to the original soil surface. At this stage the resistance is governed by the growth of a soil berm ahead of the pipe. Accurate assessment of the near-surface soil strength is difficult, hampering the use of theoretical solutions.