15 January 2024 in IEEE Transactions on Industrial Informatics
Accurate and reliable polarization information is extremely important as heading cues in underwater low-light environments, especially in the presence of hybrid refraction/scattering dynamic effects. In this article, a bio-inspired antagonistic differential polarization algorithm (ADPA) is proposed for polarization perception, enhancing the resolution and contrast of polarization signals in underwater low-light environments. Starting from the analysis of disturbances in underwater polarization measurements, the wavelet denoising algorithm is introduced to extract the effective light intensity. Subsequently, the antagonistic differential measurement equation is derived by mimicking biological antagonistic differential mechanisms, improving the polarization contrast from orthogonal photoreceptors. The proposed ADPA exhibits the capability to effectively handle consistent interference while dampening time-varying nonlinear disturbances. On this basis, a bio-inspired navigation strategy using ADPA is presented for heading determination. The mapping relationship between underwater polarization information and spatial motion information is revealed. Underwater navigation experiments in real oceans are carried out to manifest the effectiveness of the investigated ADPA-based method. In comparison with existing polarization methods, the proposed method can significantly improve the reliability, adaptability, and robustness of underwater polarization-based navigation.
4 May 2021 in Journal of Navigation
With the characteristics of full autonomy and no accumulated errors, polarisation navigation shows tremendous prospects in underwater scenarios. In this paper, inspired by the polarisation vision of aquatic organisms, a novel point-source polarisation sensor with high spectral adaptability (400 nm–760 nm) is designed for underwater orientation. To enhance the environmental applicability of the underwater polarisation sensor, a novel sensor model based on the underwater light intensity attenuation coefficient and optical coupling coefficient is established. In addition, concerned with the influence of light intensity uncertainty on sensor performance underwater, an antagonistic polarisation algorithm is adopted for the first time, to improve the accuracy of angle of polarisation and degree of polarisation in the low signal-to-noise ratio environment underwater. Finally, indoor and outdoor experiments are carried out to evaluate the performance of the designed polarisation sensor. The results show that the designed point-source polarisation sensor can acquire polarised light and be used for heading determination underwater.
14 October 2013 in Frontiers of Mechanical Engineering
25 November 2014 in IEEE Transactions on Applied Superconductivity
Bulk high-temperature superconductors (HTSs) with good flux trapping provide a feasible application to passive docking and assembling of space module systems. To learn dynamic process and stability of a superconducting interface module consisted of the flux-trapped HTS and an interfacing magnet, an experimental setup is designed to simulate the horizontal approaching process in the interface module and measure the dynamic force properties. Momentum difference in the module is given by changing the swinging angle of the interfacing magnet. Displacement of the interfacing magnet relative to the magnetized superconductor is recorded by a charge-coupled device to state dynamic behavior. Effects of different field-cooling (FC) magnetization conditions on the dynamic properties are demonstrated by analyzing the displacement dissipation. The FC magnetization can provide a stable interfacing process, although a long damping time is required. Influence of additional aluminum metal structure on the damping properties is also investigated, and the damping ability is increased by adding the metal thickness. Therefore, the aluminum structure producing eddy current loss is proposed to be applied in the superconducting interface module to improve the interface stability.
23 August 2024 in IEEE Transactions on Industrial Informatics
Polarization navigation is an emerging autonomous navigation technology suitable for unmanned underwater vehicles (UUVs). Nonetheless, light refraction poses challenges for underwater polarization navigation as it alters the direction and amplitude of the polarization electric vector (E-vector). In this article, we propose a novel underwater heading determination method with inertial navigation system/polarization sensor integration in consideration of light refraction. In view of light deflection and energy attenuation under refraction, the direction correction matrix and amplitude compensation factor are established for the E-vector. On this basis, the refracted E-vector is introduced into the heading measurement model, which can reduce modeling errors induced by refraction, thereby producing a better prediction of heading information. In addition, a dual-filter algorithm is constructed to handle fusion models with different characteristics, improving the reliability and efficiency of heading estimation. Numerical simulation is conducted to confirm the feasibility of the proposed method, while ocean navigation experiments on UUV are carried out to evaluate its accuracy.
11 November 2025 in IEEE/ASME Transactions on Mechatronics
Although microelectromechanical system (MEMS) gyroscopes offer advantages such as miniaturization, low cost, low power consumption, and high integration, their measurement errors significantly limit their performance, particularly in high-precision applications. In this article, we address the measurement errors of MEMS gyroscopes by developing a hybrid intelligent modeling and composite disturbance filtering (CDF) strategy. Specifically, a wavelet transform method is proposed to decompose the error signals into stationary components and nonstationary residuals. On this basis, a hybrid autoregressive moving average/long short-term memory model is established and incorporated into the vehicle dynamics. Since the dynamic and stochastic properties of MEMS gyroscope errors have been sufficiently characterized using this hybrid model, a CDF method is developed that leverages the heterogeneous error characteristics for refined error processing. Moreover, a real-time parameter update law of the error model is embedded into the CDF for better adaptiveness. By virtue of the proposed modeling and filtering scheme, the MEMS gyroscope errors can be effectively represented and rejected, enabling accurate and reliable inertial navigation without the need for additional sensors. Finally, the effectiveness of our method is verified via both static and semiphysical dynamic experiments.