The production of activated carbon (AC) from lignocellulosic biomass through chemical activation is gaining global attention due to its scalability, economic viability, and environmental advantages. Chemical activation offers several benefits, including energy efficiency, reduced carbonization time, and lower temperature requirements. In this study, potassium hydroxide (KOH) was employed for chemical activation, resulting in activated carbon with a high specific surface area of ~3050 m2/g. The structural analysis revealed the presence of graphitized carbon in the activated carbon matrix, accounting for over 15%. The X-ray diffraction (XRD) technique was employed to investigate the activated carbon derived from rice husk (RH). The potential applications of activated carbon obtained from rice husks through chemical activation were explored, including its use for heavy metal removal, elimination of organic pollutants, and as an active material in hybrid energy storage devices. Furthermore, a scaling methodology for the production of activated carbon was proposed, facilitating its industrial implementation.
Addition of PVDF to LiTFSI–PEO solid electrolytes enables preparation of free-standing films with the compositions within the so called “crystallinity gap” of LiTFSI–PEO system. Such films possess ionic conductivity of about 0.3 mS cm−1 at 60 °C.
The increasing demand for sustainable and efficient energy storage materials has led to significant research into utilizing waste biomass for producing activated carbons. This study investigates the impact of the structural properties of activated carbons derived from various lignocellulosic biomasses—barley straw, wheat straw, and wheat bran—on the electrochemical performance of supercapacitors. The Fourier Transform Infrared (FTIR) spectroscopy analysis reveals the presence of key functional groups and their transformations during carbonization and activation processes. The Raman spectra provide detailed insights into the structural features and defects in the carbon materials. The electrochemical tests indicate that the activated carbon’s specific capacitance and energy density are influenced by the biomass source. It is shown that the wheat-bran-based electrodes exhibit the highest performance. This research demonstrates the potential of waste-biomass-derived activated carbons as high-performance materials for energy storage applications, contributing to sustainable and efficient supercapacitor development.
Developing solid-state batteries as a promising safer alternative to the conventional Li-ion technology raises new cell design challenges. In particular, application of the polymer electrolyte demands fine-tuning of the electrode composition due to low ionic conductivity. Here, the impact of polyethylene oxide-based electrolyte content on the performance of the composite Li x V 2 O 5 electrodes was investigated. A series of composite electrodes were tested in galvanostatic discharge experiments. The analysis of the obtained discharge curves allowed us to identify and separate capacity limiting factors originating from the electrode structure and the electrolyte transport properties. Macrokinetic simulations were employed to confirm the conclusions and illustrate the electrolyte depletion effect by calculating the Li + concentration profiles. The simulation results provided the basis for constructing the limiting current maps for a wide range of electrolyte fractions and electrode thickness values. These maps predict maximum discharge current density, at which the cell can efficiently operate without losing the capacity due to electrolyte diffusion limitations.