21 February 2008 in Environmental Geology
17 October 2013 in Hydrology and Earth System Sciences
This paper evaluates the results of benchmark testing a new inertial formulation of the St. Venant equations, implemented within the LISFLOOD-FP hydraulic model, using different high resolution terrestrial LiDAR data (10 cm, 50 cm and 1 m) and roughness conditions (distributed and composite) in an urban area. To examine these effects, the model is applied to a hypothetical flooding scenario in Alcester, UK, which experienced surface water flooding during summer 2007. The sensitivities of simulated water depth, extent, arrival time and velocity to grid resolutions and different roughness conditions are analysed. The results indicate that increasing the terrain resolution from 1 m to 10 cm significantly affects modelled water depth, extent, arrival time and velocity. This is because hydraulically relevant small scale topography that is accurately captured by the terrestrial LIDAR system, such as road cambers and street kerbs, is better represented on the higher resolution DEM. It is shown that altering surface friction values within a wide range has only a limited effect and is not sufficient to recover the results of the 10 cm simulation at 1 m resolution. Alternating between a uniform composite surface friction value (n = 0.013) or a variable distributed value based on land use has a greater effect on flow velocities and arrival times than on water depths and inundation extent. We conclude that the use of extra detail inherent in terrestrial laser scanning data compared to airborne sensors will be advantageous for urban flood modelling related to surface water, risk analysis and planning for Sustainable Urban Drainage Systems (SUDS) to attenuate flow.
7 November 2016 in Journal of Flood Risk Management
29 May 2015 in Geocarto International
The purpose of this study is to explain the formation mechanism of the floods which occurred in the Keçidere basin in 2009. In this study, discharge data in between 1981 and 2009, digital elevation model (DEM), satellite images and field works were used as a main data sources. LPT3 was applied to 29-year maximum flow data to produce different flood return periods such as 2, 5, 50, 100, 200, 500 and 1000-year flood. The DEM was created using 1:25,000 topographic contours with Topo to Raster interpolation techniques in geographical information systems (GIS). Land use and some geometric data were digitized using high resolution satellite images for hydraulic modelling purposes. Simulation of the 2009 flash flood event and different return periods flow data was done using one-dimensional hydraulic modelling with HEC-RAS. In the last phase, results obtained from the simulations and field works were compared based on fits statistics and mean absolute error in terms of extent and depth. An analysis of water extent and depth features observed during the highest flow ever measured in the basin revealed that the result overlapped with 500-year inundation extent. Overall, the results of the research indicate that GIS is an effective environment for floodplain mapping and analysis.
31 October 2020 in Hydrological Processes
1 January 2015 in Physics and Chemistry of the Earth, Parts A/B/C