Andreas Billiani

Andreas Billiani

Auto-generated profile, based on publicly available information

Andreas Billiani

Institute of Chemical Engineering and Environmental Technology, Graz University of Technology, Inffeldgasse 25/C, 8010 Graz, Austria

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2023 in ACS Omega
Verified
Journal Article
Open access
MRMichaela Roschger
Michaela Roschger
SWSigrid Wolf
Sigrid Wolf
ABAndreas Billiani
Andreas Billiani
KMKurt Mayer
Kurt Mayer
MHMaša Hren
Maša Hren
Viktor HackerViktor Hacker
Viktor Hacker
This study provides a comparison of different commercially available low-cost anion exchange membranes (AEMs), a microporous separator, a cation exchange membrane (CEM), and an anionic-treated CEM for their application in the liquid-feed alkaline direct ethanol fuel cell (ADEFC). Moreover, the effect on performance was evaluated taking two different modes of operation for the ADEFC, with AEM or CEM, into consideration. The membranes were compared with respect to their physical and chemical properties, such as thermal and chemical stability, ion-exchange capacity, ionic conductivity, and ethanol permeability. The influence of these factors on performance and resistance was determined by means of polarization curve and electrochemical impedance spectra (EIS) measurements in the ADEFC. In addition, the influence of two different commercial ionomers on the structure and transport properties of the catalyst layer and on the performance were analyzed with scanning electron microscopy, single cell tests, and EIS. The applicability barriers of the membranes were pointed out, and the ideal combinations of membrane and ionomer for the liquid-feed ADEFC achieved power densities of approximately 80 mW cm-2 at 80 °C.

28 March 2023 in Journal of Electrochemical Science and Engineering
Verified
Journal Article
Open access
PDF file
MRMichaela Roschger
Michaela Roschger
SWSigrid Wolf
Sigrid Wolf
ABAndreas Billiani
Andreas Billiani
Selestina GorgievaSelestina Gorgieva
Selestina Gorgieva
Bostjan GenorioBostjan Genorio
Bostjan Genorio
Viktor HackerViktor Hacker
Viktor Hacker
The direct electrochemical conversion of ethanol, a sustainable fuel, is an alternative sustainable technology of the future. In this study, membrane electrode assemblies with different electrode configurations for an alkaline direct ethanol fuel cell were fabricated and tested in a fuel cell device. The configurations include a catalyst-coated substrate (CCS), a catalyst-coated membrane (CCM), and a mixture of these two fabrication options. Two different anion exchange membranes were used to perform a comprehensive analysis. The fabricated CCSs and CCMs were characterized with single cell measurements, electro­chemical impedance spectroscopy and scanning electron microscopy. In addition, the swelling behavior of the membranes in alkaline solution was investigated in order to obtain information for CCM production. The results of the experimental electrochemical tests show that the CCS approach provides higher power densities (42.4 mW cm-2) than the others, regardless of the membrane type.