26 March 2018 in Nature Communications
Transition-metal dichalcogenide monolayers have naturally terminated surfaces and can exhibit a near-unity photoluminescence quantum yield in the presence of suitable defect passivation. To date, steady-state monolayer light-emitting devices suffer from Schottky contacts or require complex heterostructures. We demonstrate a transient-mode electroluminescent device based on transition-metal dichalcogenide monolayers (MoS2, WS2, MoSe2, and WSe2) to overcome these problems. Electroluminescence from this dopant-free two-terminal device is obtained by applying an AC voltage between the gate and the semiconductor. Notably, the electroluminescence intensity is weakly dependent on the Schottky barrier height or polarity of the contact. We fabricate a monolayer seven-segment display and achieve the first transparent and bright millimeter-scale light-emitting monolayer semiconductor device.
1 July 2019 in Applied Physics Letters
Transition metal dichalcogenide (TMDC) monolayers are promising materials for next-generation nanoscale optoelectronics, including high-speed light sources and detectors. However, most past reports on TMDC light-emitting diodes are limited to operation in high vacuum, while most applications require operation under ambient conditions. In this work, we study the time-resolved electroluminescence of monolayer WSe2 p-n junctions under ambient conditions and identify the decay in current over time as the main issue preventing stable device operation. We show that pulsed voltage bias overcomes this issue and results in bright electroluminescence under ambient conditions. This is achieved in a simple single-gate structure, without the use of dual gates, heterostructures, or doping methods. Internal quantum efficiency of electroluminescence reaches ∼1%, close to the photoluminescence quantum efficiency, indicating efficient exciton formation with injected carriers. Emission intensity is stable over hours of device operation. Finally, our device exhibits ∼15 ns rise and fall times, the fastest direct modulation speed reported for TMDC light-emitting diodes.
18 September 2019 in Nano Letters
27 November 2017 in Applied Physics Letters
We experimentally demonstrate a monolithic 3D integrated complementary metal oxide semiconductor (CMOS) inverter using layered transition metal dichalcogenide semiconductor N-channel (NMOS) and P-channel (PMOS) MOSFETs, which are sequentially integrated on two levels. The two devices share a common gate. Molybdenum disulphide and tungsten diselenide are used as channel materials for NMOS and PMOS, respectively, with an ON-to-OFF current ratio (ION/IOFF) greater than 106 and electron and hole mobilities of 37 and 236 cm2/Vs, respectively. The voltage gain of the monolithic 3D inverter is about 45 V/V at a supply voltage of 1.5 V and a gate length of 1 μm. This is the highest reported gain at the smallest gate length and the lowest supply voltage for any 3D integrated CMOS inverter using any layered semiconductor.