1 February 2021 in AIP Advances
This work theoretically demonstrates a quasi-periodic selective multilayer emitter for sub-ambient daytime radiative cooling. In the design process, by inserting well-defined materials with different refractive-index profiles in suitable layers, there are absorption bands at different regions and the absorption bands are enhanced and broad in atmospheric transparency windows. Combined with the interference effects of the surface and the high reflectivity of Ag, the solar reflectance of the emitter is maximal in the solar spectrum. The influence of different nonradiative heat exchanges and the ambient air temperatures on the cooling performance of the multilayer emitter are calculated. At the same time, the mechanism of radiative cooling is analyzed. All the results show that the proposed emitter can effectively achieve sub-ambient daytime radiative cooling. Due to the superior durability and mechanical robustness of the multilayer emitter, it may be a key element in the realization of energy-efficient radiative cooling devices.
11 October 2024 in Optics Express
In this work, we study the imaging performance of microsphere-assisted microscopy (MAM) using microspheres with different refractive indices and immersion conditions under both bright-field illumination (BFI) and dark-field illumination (DFI). The experimental results show that the position of the photonic nanojet of the microsphere plays an important role in MAM imaging. The contrast in imaging is affected by the reflection from the microsphere, the background signal without the microsphere, and the electric field on the substrate surface. In MAM, BaTiO3 glass microspheres achieve better imaging results under BFI when immersed in a polydimethylsiloxane (PDMS) film but are challenging to image under DFI. However, SiO2 and polystyrene microspheres exhibit improved imaging performance under both BFI and DFI with PDMS-covered semi-immersion, and the imaging contrast in DFI is superior to that in BFI under the same conditions. Besides, the Talbot effect is observed by MAM under DFI when imaging 300-nm-diameter hexagonally close-packed nanoparticle arrays. This work reveals the advantage of MAM under DFI in improving the contrast.
24 January 2025 in Optics Letters
Polarization sensitivity is a fundamental phenomenon observed in nature, and its application is vital for advancing scientific discoveries. Here, we present a microsphere-assisted polarized light microscopy method that enables high-quality, label-free super-resolution imaging of polarization-sensitive materials. We investigated the imaging performance of this method using various samples, including colloidal crystals and grating structures. Both simulations and experiments were performed to explore the underlying physical mechanisms driving the enhancement in imaging quality. The results of this work have potential values for the fields of polarized light microscopy and super-resolution imaging.
1 March 2022 in AIP Advances
In this work, we introduce a method to improve the performance of microsphere-assisted imaging by optimizing the refractive index of immersion media. In the method, polystyrene (PS) microspheres are semi-immersed in water, spin-on-glass, SU-8 resist, and S1805 resist. We experimentally find that the distortion of the image observed by a PS microsphere semi-immersed in SU-8 resist is the smallest while the resolution of the semi-immersed microsphere is the highest. ZEMAX software simulations show that PS microspheres semi-immersed in SU-8 resist have the smallest distortion and spherical aberration. Moreover, numerical simulations also reveal that they have the strongest peak intensity, the narrowest waist, and the shortest focal length of the photonic nanojet. When the semi-immersed PS microsphere is used in microsphere-assisted microscopy, a 200-nm-diameter hexagonally close-packed (hcp) silica nanoparticle array can be clearly distinguished. When they are used in microsphere-assisted interference microscopy, a 250-nm-diameter hcp silica nanoparticle array can be resolved.
18 February 2025 in Optics Letters
Visualization of low-index dielectric nanoparticles and biological nanostructures is challenging under a traditional optical microscope. In this work, we propose a planar photonic substrate to enhance the extremely weak scattering signal and improve the contrast in imaging low-index samples under a dark-field illumination (DFI) optical microscope. Specifically, a planar photonic substrate is prepared by depositing a multilayer optical film on a silica substrate with the maximum electric field intensity distributed on the substrate surface. The scattering signal of a sample placed on the planar photonic substrate is enhanced due to the strong substrate–nanoparticle interaction. The experimental results show that the scattering intensity of a 150-nm-diameter SiO2 nanoparticle placed on a planar photonic substrate is about 4.8 times of that on a silica substrate. In addition, individual SiO2 nanoparticles with 50 nm diameter and bacterial flagella about 50 nm thick can be clearly observed, which indicates that the proposed method can improve the contrast in imaging low-index samples with subwavelength features under a traditional optical microscope.
14 July 2025 in Applied Physics Letters
Optical imaging techniques based on spherical lenses have demonstrated significant potential in nanomaterial surface characterization and biomedical diagnostics, primarily attributed to their capability for label-free, real-time, and high-resolution imaging. Here, we present a composite spherical lens (CSL) that can achieve sub-diffraction-limit imaging resolution. The CSL is composed of a photoresist thermal reflow-formed hemispherical microsphere composited with a photoresist thin slab. Physical optics simulations were performed to determine the focal lengths of the CSL, which were subsequently utilized to modify geometric optics theory. The modified theory accurately predicted the magnification of the CSL. Through combined computational and experimental methods, we investigated the influence of hemispherical microsphere orientation and CSL thickness on imaging performance. Results indicate that for a CSL incorporating 12.5-μm-radius hemispherical microspheres, optimal imaging performance is achieved with a face-down hemispherical microsphere configuration and a 7-μm-thick photoresist slab, enabling a lateral resolution of approximately 130 nm.