The control technique for generating whole body motions on wheel-leg robot for dynamic locomotion and balance is a challenging topic. In this paper, a whole body dynamic model is built. It consisted by the torso dynamic model, the wheel-leg dynamic model and the contact force constraint between the wheels and the ground. A whole body control frame is proposed which composed by a torso motion controller, two torque solvers, a slippage predictor and an online trajectory generator. The torso controller plans the coupling wrenches between wheel-legs and torso. The torque solvers for every wheel-leg compute joint torques based on the coupling wrenches computed from the torso controller synchronously. The contact forces can be calculated by the slippage predictor based on the joint torques, then a boolean signal will be transmitted to the online trajectories generator to indicate whether the friction cone constraint will be broken. The online trajectory generator can plan reasonable acceleration trajectory with different boolean signals. The efficiency of this control frame is illustrated by several simulations in virtual simulation environment.
The hydraulic servo actuator with passive compliance (HPCA) is designed for hydraulically-driven quadruped robots. It is characterized by an accumulator that connects to the piston chamber of the hydraulic cylinder to buffer impact forces between a robot’s feet and the ground. This paper studies the energy efficiency of this actuator in the dynamic locomotion of a quadruped robot. Different from the traditional methods of storing potentially recyclable energy using accumulators, the energy-saving principle of HPCA is to utilize the pressure-transition characteristics of the asymmetric hydraulic cylinder with control of the symmetrical valve. The accumulator can store and release oil during the switching of the transition point in each gait cycle of the robot, thereby improving the energy efficiency of the actuator. The influence of the initial inflation pressure and working volume of the accumulator on the energy efficiency of the HPCA is studied by simulation and physical experiments. The results show that the HPCA has a higher energy efficiency that is independent of the physical parameters of the accumulator.
A hydraulic servo actuator with passive compliance (HPCA) is designed for hydraulic actuated quadruped robots, aiming to solve the response discrepancy of the low-bandwidth servo valve to impact forces between robot’s feet and the ground. This paper focuses on the performance of this passive compliance method combined with an active compliance control strategy when used on quadruped robots. First, the frequency-response characteristics of the HPCA are further discussed. Then, combined with the requirements of the quadruped robot, a compliant method characterized by incorporating dynamic feedforward control and joint angle feedback control items into the virtual model is proposed. Finally, both the new algorithm and the performance of the HPCA are verified by simulation and experiment. The results demonstrate that, compared with the original actuator, the frequency-response characteristics of the HPCA have better adaptability for the quadruped robot, while the efficiency of the active compliance control is also improved by this novel passive compliance strategy.
8 February 2024 in International Journal of Control, Automation, and Systems
Impact forces are inevitably generated between the feet and theground while legged robots are moving, and the hydraulic servoactuator with the original structure cannot respond to such impactforces in a timely manner though it is controlled by the hydraulicservo valve with high performance.