Dylan Richmond

Dylan Richmond

Auto-generated profile, based on publicly available information

Dylan Richmond

Department of Materials Science and Engineering, State University of New York at Binghamton, Binghamton, NY, USA

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 March 2024 in IEEE Journal of Radio Frequency Identification
Verified
Journal Article
Closed access
EEEmuobosan Enakerakpo
Emuobosan Enakerakpo
AUAshraf Umar
Ashraf Umar
MAMohammed Alhendi
Mohammed Alhendi
RARiadh Al-Haidari
Riadh Al-Haidari
DRDylan J. Richmond
Dylan J. Richmond
JNJonathan Nicholas
Jonathan Nicholas
The development of innovative, miniaturized, and low-cost Radio Frequency Identification (RFID) tags for application in asset monitoring, counterfeit prevention, or personnel tracking requires advancements in materials, fabrication processes, and packaging. Typical RFID tags can be circumvented by tampering, cloning, or spoofing; however, by adding security features to the tag, nefarious actions such as these can be mitigated. Toward this objective, this paper presents the design and fabrication of an Ultra High Frequency (UHF) RFID tag through flexible hybrid electronics (FHE) materials and processes for authentication and anti-tamper /anti-counterfeit applications. The presented UHF RFID tag consists of a passive RF chip and dipole antenna with embedded hardware and software security features. The tag was fabricated using a hybrid of manufacturing techniques including, conventional photolithography and additive aerosol jet printing. The design, materials selection, processing, and tailored FHE fabrication processes, led to achieving a system-level functional RFID tag with a read distance of up to 15 in (0.381 m). The dependency of the read distance on the host surface was studied by attaching tags to different materials including surfaces with various dielectric constants and thicknesses. The performance of the tags was evaluated under realistic use conditions by performing thermal cycling, bending, and wearability tests. The RFID tag’s resistance to different tamper attack vectors (vulnerability assessment) is demonstrated. Overall, the demonstrated UHF RFID tag opens new opportunities for the development of flexible, lightweight, and low-cost RFID tags that leverage FHE fabrication techniques and materials for authentication and anti-tamper applications.

10 November 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
TEThilini Ekanayaka
Thilini Ekanayaka
DRDylan Richmond
Dylan Richmond
MMMason McCormick
Mason McCormick
SNShashank R. Nandyala
Shashank R. Nandyala
HHHalle C. Helfrich
Halle C. Helfrich
AYAndrew Yost
Andrew Yost
The anion exchange of the halides, Br and I, is demonstrated through the direct mixing of two pure perovskite quantum dot solutions, CsPbBr3 and CsPbI3, and is shown to be both facile and result in a completely alloyed single phase mixed halide perovskite. Anion exchange is also observed in an interlayer printing method utilizing the pure, unalloyed perovskite solutions and a commercial inkjet printer. The halide exchange was confirmed by optical absorption spectroscopy, photoluminescent spectroscopy, X-ray diffraction, and X-ray photoemission spectroscopy characterization and indicates that alloying is thermodynamically favorable, while the formation of a clustered alloy is not favored. Additionally, a surface-to-bulk photoemission core level transition is observed for the Cs 4d photoemission feature, which indicates that the electronic structure of the surface is different from the bulk. Time resolved photoluminescence spectroscopy indicates the presence of multiple excitonic decay features, which is argued to originate from states residing at surface and bulk environments.

5 September 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
RARiadh Al-Haidari
Riadh Al-Haidari
DRDylan Richmond
Dylan Richmond
AOAbdullah Obeidat
Abdullah Obeidat
MAMohammed Alhendi
Mohammed Alhendi
EAEl Mehdi Abbara
El Mehdi Abbara
CHCollin Hitchcock
Collin Hitchcock
Advanced packaging solutions for wide band-gap power devices such as SiC MOSFETs can help realize their full potential. Additively printed electronics present a promising solution to enable SiC packaging, providing an approach to reduce the parasitic inductance, miniaturize, and explore countless form factors. Although printed electronics have gained popularity in diverse electronic manufacturing fields, their application in high-power electronics remains largely unexplored. Herein, we aim to develop a planar high-power SiC module (>1.2kV) using printed electronics materials and processes. Moreover, we aim to assess the feasibility and reliability of printed electronics for power packaging. The results of device-package simulations, materials testing, and processing showed promising potential in meeting requirements for SiC power modules. Functional testing of the power modules shows performance that is in line with traditionally packaged modules. The functional test vehicles also pass high voltage isolation and partial discharge tests. However, the high contact resistance between the printed conductors and module surfaces is a limiting factor in achieving low on-resistance and high current capabilities. Tailored surfaces with pressure-assisted curing helped overcome this limit and achieve high current-carrying capacity and low on-resistance. Finally, the stress testing shows mixed results, and further improvement is needed.

26 January 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
PMPeter McClure
Peter McClure
DRDylan Richmond
Dylan Richmond
MPMark Poliks
Mark Poliks
JWJames Wilcox
James Wilcox
Thermal interface materials (TIMs) transfer heat between two surfaces in electronic assemblies. Specifically, a TIM 2 is a TIM used to transfer heat from a component’s lid to a heat sink. During use, TIM 2s experience thermal aging and mechanical stress (caused by board/component/heat sink expansion mismatches and warpage during heating/cooling). Understanding the response of TIMs to these stresses is critical for understanding TIM and product reliability. However, the responses of TIMs are complex and difficult to predict or model. TIMs are often polymeric materials heavily loaded with thermally conductive fillers and have time, temperature, and rate-dependent properties. Therefore, experimental studies are needed to address TIM reliability. However, monitoring TIM stability or performance while in situ is difficult. Electrical capacitance has been used to monitor the stability of dielectric TIM in situ, allowing for monitoring TIM stability and, indirectly, the TIM thermal performance. But electrically conductive TIMs cannot be used with capacitance measurements, so a new technique is needed. Monitoring a conductive TIM’s electrical resistance could give insight into a TIM’s stability, as thermal and electrical resistance are both affected by a TIM’s contact with surfaces, thickness, and area. This study examines four electrically conductive graphite pad TIMs on a test board, representing a large printed circuit board with a large shared heat sink, in an accelerated thermal cycle from 0 to 100°C. The electrical resistance of the TIMs was monitored in situ, and after testing post mortem failure analysis of the TIMs was done. The efficacy of electrical resistance monitoring for evaluating TIM stability was examined, and correlations with failure analysis results were made. Electrical resistance monitoring provided insight into the TIMs’ stability, failure time, and extent of failure.

31 October 2022 in Preprints.org
Verified
Preprint
Open access
PDF file
TEThilini Ekanayaka
Thilini Ekanayaka
DRDylan Richmond
Dylan Richmond
MMMason McCormick
Mason McCormick
SNShashank R. Shashank R. Nandyala
Shashank R. Shashank R. Nandyala
HHHalle C. Helfrich
Halle C. Helfrich
AYAndrew Yost
Andrew Yost
Anion exchange of the halides, Br and I, is demonstrated through the direct mixing of two pure perovskite quantum dot solutions, CsPbBr3 and CsPbI3, and is shown to be both facile and result in a completely alloyed single phase mixed halide perovskite. Anion exchange is also observed in an interlayer printing method utilizing the pure, unalloyed perovskite solutions and a commercial inkjet printer. The halide exchange was confirmed by optical absorption spectroscopy, photoluminescent spectroscopy, X-ray diffraction, and X-ray photoemission spectroscopy characterization, and indicates that alloying is thermodynamically favorable, while the formation of a clustered alloy is not favored. Additionally, a surface-to-bulk photoemission core level transition is observed for the Cs 4d photoemission feature which indicates the electronic structure of the surface is different from the bulk. Time resolved photoluminescence spectroscopy indicates the presence of multiple excitonic decay features which is argued to originate from states residing at surface and bulk environments.