This article discusses key elementary surface-reaction processes in state-of-the-art plasma etching and deposition relevant to nanoelectronic device fabrication and presents a concise guide to the forefront of research on plasma-enhanced atomic layer etching (PE-ALE) and plasma-enhanced atomic layer deposition (PE-ALD). As the critical dimensions of semiconductor devices approach the atomic scale, atomic-level precision is required in plasma processing. The development of advanced plasma processes with such accuracy necessitates an in-depth understanding of the surface reaction mechanisms. With this in mind, we first review the basics of reactive ion etching (RIE) and high-aspect-ratio (HAR) etching and we elaborate on the methods of PE-ALE and PE-ALD as surface-controlled processing, as opposed to the conventional flux-controlled processing such as RIE and chemical vapor deposition (CVD). Second, we discuss the surface reaction mechanisms of PE-ALE and PE-ALD and the roles played by incident ions and radicals in their reactions. More specifically, we discuss the role of transport of ions and radicals, including their surface reaction probabilities and ion-energy-dependent threshold effects in processing over HAR features such as deep holes and trenches.
14 January 2020 in Journal of Materials Chemistry A
In this paper, we report the activation entropy (ΔS) values for Li-stuffed Li6.5La2.9A0.1Zr1.4Ta0.6O12 (A = Ca, Sr, Ba) garnets using a statistical mechanical approach and the role of ceramic processing in Li ion charge transfer between elemental Li and Li-stuffed Li6.5La2.9A0.1Zr1.4Ta0.6O12 garnets. The investigated solid electrolytes were prepared by a solid-state reaction and a spark plasma sintering method. The formation of the garnet-type structure was confirmed by powder X-ray diffraction. The homogeneous distribution of the elements in the prepared compositions was investigated using electron probe micro analyzer coupled with a wavelength-dispersive X-ray spectrometer. Li ion conductivity was determined using electrochemical ac impedance spectroscopy. The calculated ΔS value for garnet-type Li6.5La2.9A0.1Zr1.4Ta0.6O12 is found to be one order of magnitude higher than that of other solid electrolytes such as Li4SiO4 (Li+), Na3ZrMgP3O12 (Na+), AgI (Ag+) and Ag-β-alumina (Ag+) and comparable to that of the polymer Li ion electrolyte (PEO)10-LiClO4. SPS-processed Li6.5La2.9A0.1Zr1.4Ta0.6O12 samples showed a bulk Li ion conductivity of 5.5 × 10−4 S cm−1 at 22 °C. Among all the samples investigated in this work, Li6.5La2.9Sr0.1Zr1.4Ta0.6O12 showed an impressive Li ion charge transfer resistance (RCT) of 3.5 Ω cm2 at 25 °C without any surface coating of metal oxides, such as Al2O3 and ZnO, and exhibited a critical current density of 0.6 mA cm−2.
1 January 2006 in Journal of Environmental Radioactivity
For biological and medical applications of low-temperature atmospheric-pressure plasmas (APPs), gas- and liquid-phase chemical reactions caused by the plasmas determine the effectiveness of the APP-based treatments of biological systems. In this study, ions generated by helium-based low-frequency APP jets were identified by mass spectrometry. It is shown that, among all positive ions generated by plasma jets in ambient air, hydronium ions (H3O+) are the dominant ions that form water clusters. The stability of a hydronium ion with water molecules suggests that all positive ions generated by plasma jets would transfer their charges to hydronium ions if water molecules were abundant such as in humid air or water. Similarly it is shown that, among all negative ions generated by the plasma jets in ambient air, a relatively small number of kinds of ions such as OH-, HO2-, NO2-, NO3-, HCO3-, and HCO4- form water clusters stably. The densities of positive and negative ions generated in ambient air by the APP jet system as well as the concentrations of H2O2 and NO2- generated in pure water exposed to the same plasma have been also measured.
6 August 2020 in Journal of Vacuum Science & Technology A
Thermal atomic layer etching (ALE) of nickel (Ni) may be performed with a step of thin-layer oxidation of its surface and another step of its removal by gas-phase hexafluoroacetylacetone (hfacH) as an etchant. In this study, adsorption of hfacH and possible formation of volatile nickel hexafluoroacetylacetonate Ni(hfac)2 on a NiO surface were investigated based on the density functional theory (DFT) with more realistic surface material models than those used in the previous study [A. H. Basher et al., J. Vac. Sci. Technol. A 38, 022610 (2020)]. It has been confirmed that an hfacH molecule approaching a NiO surface deprotonates without a potential barrier and adsorbs on the surface exothermically. In addition, stable adsorption of two deprotonated hfacH molecules on a NiO (100) surface was found to occur not on a single Ni atom but over a few Ni atoms instead, which makes the formation of a Ni(hfac)2 complex on the flat surface very unlikely even at elevated temperature. However, if the surface is rough and a Ni atom protrudes from the surrounding atoms, two hexafluoroacetylacetonate anions (hfac−) can bond to the Ni atom stably, which suggests a possibility of desorption of a Ni(hfac)2 complex from the surface at elevated temperature. Given the experimentally observed fact that desorption of Ni(hfac)2 complexes typically takes place on a NiO surface at a temperature of ∼300–400 °C, our DFT calculations indicate that the surface roughness of an oxidized Ni surface facilitates the formation and desorption of organometallic complexes Ni(hfac)2, and therefore, the resulting Ni surface after ALE can be smoother than the initial surface.
24 February 2020 in Journal of Vacuum Science & Technology A
Adsorption of enol hexafluoroacetylacetone (hfacH) on nickel oxide (NiO) fcc (100) and metallic Ni fcc (100) surfaces and the stability of the adsorbate was examined using first-principles quantum mechanical simulations. It was shown that an hfacH molecule can be unstable and dissociate on an Ni metal surface. On an NiO surface; however, an hfacH molecule can be deprotonated and form a hexafluoroacetylacetonate anion (hfac−) bonded stably with positively charged Ni atoms of the surface. The results are consistent with observations of the interaction of hfacH with NiO and Ni surfaces in earlier experiments. The results also explain the mechanisms of the adsorption steps in the thermal atomic layer etching of Ni based on the cyclic processes of surface oxidation and formation of volatile organo-nickel complexes.