1 December 2005 in Sports Engineering
15 November 2018 in Sports Engineering
The aerodynamics of a feather shuttlecock, a porous conical bluff body, are unique in comparison to other sports projectiles. Experimental wind tunnel studies have been published that present values of drag coefficient (Cd) for traditional feather shuttles that vary widely (0.48 < Cd < 0.74). It is difficult to compare published experimental data, due to a lack of clarity concerning experimental apparatus. All studies have used traditional sting mounts inserted aft of the shuttle base, and it is believed this has a strong influence on Cd, as significant air movement is known to occur in this region. Flow passes through gaps formed by individual feather shafts, or rachis, inserted into the shuttle base. The use of computational fluid dynamic (CFD) simulation in the analysis of shuttles has great potential as analysis can be performed without the need of an experimental sting. This study presents the first CFD simulations of a geometrically realistic feather shuttle. Careful consideration must be given to applied grids, numeric, and turbulence models (unsteady RANS vs scale resolving) if results obtained are to be reliable. CFD results present detailed insights of shuttle aerodynamics, and the significance of flow passage between the feather rachis and internal to the shuttle. The study raises significant concerns regarding the appropriateness of rear sting mounts in shuttle wind tunnel experiments.
11 June 2010 in Procedia Engineering
It is widely accepted that sports technology has made a major contribution to human athletic performance. In order to quantify the effect of sports technology one must first understand the influence of other factors. Human athletic performance is also related to the number of participants competing. As such it is hypothesised that the size of the global human population will be factor in athletic performance. Human performance in running events has been correlated with global gender population size. The data shows exponential decay trends which have been subsequently modelled using an exponential decay function (). Results show that a further increase in global population will have little or no effect on running performances.
7 March 2018 in Sports Engineering
In snowboarding, the wrist is the most common injury site, as snowboarders often put their arms out to cushion a fall. This can result in a compressive load through the carpals coupled with wrist hyperextension, leading to ligament sprains or carpal and forearm bone fractures. Wrist protectors are worn by snowboarders in an effort to reduce injury risk, by decreasing peak impact forces and limiting wrist extension to prevent hyperextension during falls. There is no international standard or universally accepted performance specification that snowboarding wrist protectors should conform to, resulting in an inability to judge which designs offer the best protection. This study investigated how surrogate arm design affected the stiffness of wrist protectors during quasi-static mechanical testing. Three surrogate arms with increasing design complexity were used to test three wrist protectors. The results show that surrogate design does influence the stiffness of snowboarding wrist protectors. Given that the surrogate does influence protector performance, it is recommended that a standard surrogate design is established for research and product testing.