2 December 2025 in Fusion Engineering and Design
21 November 2025 in IEEE Transactions on Applied Superconductivity
SVSriharsha Venuturumilli
KBKonstantinos Bouloukakis
+2
In this work, a 2D axisymmetric FEM model was produced to simulate OpenStar Technologies' Junior Core Magnet. The model was created in COMSOL Multiphysics, with electromagnetic and thermal coupling. This model was used to simulate the Core Magnet under full-field conditions, and was verified against the specifications of the Core Magnet. Producing the model involved creating lookup tables of homogenised electrical and thermal properties for each of the 14 solder impregnated coils, applying coordinate transformations to these lookup tables, and creating 2D axisymmetric equivalent geometry of the complex copper interface buses and plates between the coils. This paper provides insight into understanding the behaviour of NI coils and how they influence quench dynamics, current redistribution, and thermal response. The modelling approach demonstrates that computationally efficient simulations can be achieved through homogenisation and geometry simplification, offering a valuable tool for the design, optimisation, and safety assessment of large-scale superconducting magnets.
27 March 2026 in IEEE Transactions on Applied Superconductivity
Solder-impregnated high-temperature superconducting (HTS) coils inherit challenges in predicting the coil characteristics due to their complex radial resistive pathways. Unlike insulated magnets, which require active quench protection and management schemes, non-insulated (NI) coils benefit from inherent quench tolerance through radial current bypass, but require advanced thermal-electrical models to predict charging time-constants and quench-tolerant performance under designed operating regimes. This research advances the electrical resistivity characterization of solder alloys at cryogenic temperatures, improving modelling predictions of coil properties. This paper will showcase the methodology utilized for characterizing low-temperature solder alloys, such as InBi, InSn, BiSnAg, and InAg, which enable solder-impregnation at lower reflow temperatures, therefore minimizing tape degradation. Experimental characterization data are validated against existing studies of SnPb solder. Solder characterization data are incorporated into finite element method (FEM) models to accurately describe temperature-dependent electrical resistivity characteristics between tape turns; thus, by ignoring the HTS layer to be insulating, together with temperature-dependent parameters, the radial resistance of coil 1A is evaluated from the model and compared against the experimental results. This work enhanced the understanding of solder-impregnated HTS coils, determining the design process of our future magnet systems.