25 August 2025 in IEEE Transactions on Instrumentation and Measurement
In this paper, we present methodologies and devices to characterize the uniaxial complex permittivity of vanadium dioxide (VO2) thin films on c-plane sapphire. We report the anisotropic complex permittivity values of VO2 as a function of temperature. To address the challenge of characterizing an anisotropic film with a thickness of tens to hundreds of nanometers, we propose two planar transmission-line-based devices. A coplanar waveguide line and a microstrip ring resonator are designed to be sensitive to the material under test complex permittivity in-plane (εr,||) and out of plane (εr,⊥), respectively. These devices were fabricated in-house with a VO2 film contrast ratio of 105. An automated test setup was designed to measure the scattering parameters of the devices near the phase transition with a fine resolution (ΔT = 0.1 °C), enabling the extraction of temperature-dependent complex permittivity over a wide bandwidth covering 1 GHz to 67 GHz. Analytical quasi-static models are used to estimate the permittivity, and the results are further refined by minimizing the standardized error between simulation and measurement using a Bayesian optimizer. VO2 exhibits stable permittivity and loss tangent near room temperature with a non-linear increase approaching the phase transition point. The extracted permittivity and loss tangent are modeled using sigmoid and exponential functions, respectively, to capture their nonlinear behavior at the phase transition and enable implementation in simulation tools.
16 October 2025 in IEEE Journal of Radio Frequency Identification
We present the design, simulation, fabrication, and measurement results of a biodegradable sensor for postoperative monitoring. The proposed sensor is composed of a modified split-ring resonator (SRR) loaded with interdigitated capacitors (IDCs). The sensor operates at around 3.2 GHz in free space and around 2 GHz in liquid solution. The designed sensor can resolve the sensing film thickness of 6.2 μm. The sensitivity is extracted to be 4.2% in free space and 1.8% in the phantom box. A 2-tag configuration is developed to calibrate for the uncertain operating frequency when implanted. Additionally, both wired and wireless measurements are developed to fully characterize the sensor performance. Lastly, we demonstrated that the backscattering measurement data, quantified as resonance frequency in a laboratory environment, matches well with the simulation results. This work demonstrates the potential of using a wireless solution for microwave thickness sensing in next-generation biodegradable devices.
14 September 2026 in Applied Physics Letters
This study presents a sub-element rotation-based symmetry-breaking mechanism for a quantum valley Hall photonic topological insulator (PTI) with a bandgap of 15.8–19.0 GHz. The topological phase is switched between the K and K′ points in a hexagonal lattice space by selectively rotating only the ring element within the patch-loaded hexapod unit cell, without requiring active electronic components or external magnetic field bias. The proposed waveguides employ two PTI domains with opposing valley Chern numbers on a printed circuit board platform and are fed directly by microstrip lines with an open-circuit stub for impedance matching. This proposed three-port topological waveguide has two operating states, both of which demonstrate low loss and high isolation within the band. As a proof of concept, two of the three-port single-pole double-throw (SPDT) topological waveguides are designed, fabricated, and measured. The two fabricated devices achieve an insertion loss of 2.4 dB and an isolation of 33.2 dB in state 1, and an insertion loss of 1.0 dB and an isolation of 26.0 dB in state 2, both at 17 GHz. The SPDT topological waveguide allows wave routing between selected ports by the rotating ring element within each unit cell. Furthermore, it only requires rotation of four unit cells. Chern number analysis, together with simulation and experimental results, demonstrates robust transmission and verifies the topologically protected edge states. The sub-element rotation mechanism proposed in this study is compatible with mechanical actuation methods and offers a promising solution for achieving reconfigurable topological wave routing.