A novel method for a high power reconfigurable reflectarray with a moderate 30° beam scanning is demonstrated. The proposed technique eliminates the need for mechanical steering of reflectors for satellite communication. A small mechanical movement of a patterned dielectric structure under multi-slot elements achieves beam steering by changing the coupling. Due to the unique shape of the multi-slot element, the unit cell is capable of tuning the phase for both linear and circular polarizations within a single design operating at 20 GHz. The maximum phase range obtained in this design is a continuous 280° for RHCP, LHCP, and two linear polarizations at 20 GHz. The phase of the reconfigurable unit cell is verified and measured using a waveguide simulator attached to a micromotor. Maximum element loss is simulated to be 0.5 dB. To demonstrate beam steering, three reflectarrays with frozen dielectrics and square array lattices composed of 400 elements (10λ 0 ×10λ 0 ) are fabricated. The frozen reflectarrays demonstrate beams at 0°, 15°, and 30°.The measured gain is found to be 23.2 dB at broadside with 21.8 and 23.3 dB, respectively, when scanned to 15° and 30°. The 1-dB gain bandwidth is measured to be 7.45% with a 3-dB axial ratio bandwidth of 12.1%. Unlike other architectures that use non-linear semiconductor devices, the proposed reflectarray uses a dielectric insert with a height that can be controlled by a micromotor suitable for high power applications supporting up to 80 MW per square meter.
This study presents a novel implementation of vanadium dioxide (VO2) phase change material in an electromagnetic (EM) surface with beam steering capabilities. For the first time, we present the design, fabrication, and measurement of a globally actuated, VO2-based beamforming reflective EM surface. We propose a design featuring complementary unit cells that enable beam steering with a single excitation, marking a pioneering use of low-loss VO2 in creating a complementary EM surface for the mmWave band. The unit cells incorporating VO2 exhibit low-loss characteristics, with −0.92 and −1.9 dB in the hot state and −0.49 and −0.25 dB in the cold state, respectively. We incorporate both positive and negative phase variants alongside two temperature-independent phase unit cells. The complementary design enables us to utilize two beam operating states, effectively exploiting the otherwise unused cold state. We experimentally demonstrated beamforming at ±5° and ±10° from the broadside. In the case of ±10°, the measured gains at 35 GHz in the cold and hot states were 19.4 and 20.3 dB, respectively, which aligned well with the simulated gains of 20.9 and 21.5 dB. Manipulation of the electromagnetic wave direction with a single excitation has the potential for imaging, sensing, and communication applications. The complementary unit cell design methodology can be further adapted for mmWave beamforming, absorbing, and cloaking reconfigurable EM surfaces. Furthermore, the use of VO2 can be extended up to sub-THz frequencies due to the wideband, low-loss characteristics compared with conventional reconfigurable devices, such as PIN diodes or MEMS switches.
25 August 2025 in IEEE Transactions on Instrumentation and Measurement
In this paper, we present methodologies and devices to characterize the uniaxial complex permittivity of vanadium dioxide (VO2) thin films on c-plane sapphire. We report the anisotropic complex permittivity values of VO2 as a function of temperature. To address the challenge of characterizing an anisotropic film with a thickness of tens to hundreds of nanometers, we propose two planar transmission-line-based devices. A coplanar waveguide line and a microstrip ring resonator are designed to be sensitive to the material under test complex permittivity in-plane (εr,||) and out of plane (εr,⊥), respectively. These devices were fabricated in-house with a VO2 film contrast ratio of 105. An automated test setup was designed to measure the scattering parameters of the devices near the phase transition with a fine resolution (ΔT = 0.1 °C), enabling the extraction of temperature-dependent complex permittivity over a wide bandwidth covering 1 GHz to 67 GHz. Analytical quasi-static models are used to estimate the permittivity, and the results are further refined by minimizing the standardized error between simulation and measurement using a Bayesian optimizer. VO2 exhibits stable permittivity and loss tangent near room temperature with a non-linear increase approaching the phase transition point. The extracted permittivity and loss tangent are modeled using sigmoid and exponential functions, respectively, to capture their nonlinear behavior at the phase transition and enable implementation in simulation tools.
Nonlinear behavior of phase-change materials such as vanadium dioxide (VO2) can be exploited to create novel electromagnetic devices such as low-loss radio frequency (RF) switches. The interaction of the RF or optical wave with such nonlinear media provides unique opportunities to realize new electromagnetic structures such as nonreciprocal devices, routers, and limiters. Yet, the nonlinearity resulting from the insulator-metal transition (IMT) is often only defined for a temperature or dc voltage dependency. We report the first study of RF field-induced transition of VO2. Several coplanar waveguide structures with series nonlinear elements (i.e., switches) are designed, fabricated, and characterized over the RF power range that induces the nonlinearity. The experimental findings of the RF field-induced transition, including how the geometry of the VO2 affects the transition threshold and the power handling, are reported. We demonstrate a 60 ns switching time and the switching speed dependency on input power. We also report high reliability across 10 × 106 cycles of the RF field-induced transition of VO2. These findings establish RF field excitation as a viable and efficient mechanism for triggering the IMT in VO2, offering significant potential for next-generation high-speed, reconfigurable RF and mmWave applications.
1 October 2026 in IEEE Transactions on Microwave Theory and Techniques
We present a nonlinear microwave metasurface based on vanadium dioxide (VO2) that enables fast, intensity-dependent transmission at X-band frequencies. The metasurface rejects high-intensity incident waves while remaining electromagnetically transparent under low-intensity conditions. By combining strongly resonant field enhancement with strategically placed VO2 phase-change switches, the surface exhibits an abrupt intensity-dependent transition from high-transmission to high-isolation at 10 GHz. In the low-intensity regime, the metasurface provides a 3 dB transmission bandwidth of 9.5–10.5 GHz with a minimum measured insertion loss of 1.1 dB. At elevated intensities, the metasurface achieves more than 27 dB of peak rejection, sufficient for effective high-intensity isolation. The power-dependent metasurface transition threshold was observed at orders of magnitude lower power densities than previous VO2 nonlinear metasurfaces. Ultrafast nonlinear switching was demonstrated with measured activation and recovery times of 16 and 106 ns, respectively. The transition threshold was tuned through both switch geometry and ambient temperature, and stable operation was validated over 0–60 °C. Comprehensive thermal, nonlinear, and transient characterizations are presented, establishing design guidelines for threshold control. Physical effects contributing to the field-assisted transition are discussed. These results demonstrate that VO2 metasurfaces can enable fast bias-free nonlinear systems in microwave bands.