By using ZnO thin films doped with Ce, Tb or Eu, deposited via radiofrequency magnetron sputtering, we have developed monochromatic (blue, green and red, respectively) light emitting devices (LEDs). The rare earth ions introduced with doping rates lower than 2% exhibit narrow and intense emission peaks due to electronic transitions in relaxation processes induced after electrical excitation. This study proves zinc oxide to be a good host for these elements, its high conductivity and optical transparency in the visible range being as well exploited as top transparent electrode. After structural characterization of the different doped layers, a device structure with intense electroluminescence is presented, modeled, and electrically and optically characterized. The different emission spectra obtained are compared in a chromatic diagram, providing a reference for future works with similar devices. The results hereby presented demonstrate three operating monochromatic LEDs, as well as a combination of the three species into another one, with a simply-designed structure compatible with current Si technology and demonstrating an integrated red-green-blue emission.
The resistive switching properties of ITO/ZnO/p-Si devices have been studied, which present well-defined resistance states with more than five orders of magnitude difference in current. Both the high resistance state (HRS) and the low resistance state (LRS) were induced by either sweeping or pulsing the voltage, observing some differences in the HRS. Finally, the charge transport mechanisms dominating the pristine, HRS, and LRS states have been analyzed in depth, and the obtained structural parameters suggest a partial re-oxidation of the conductive nanofilaments and a reduction of the effective conductive area.
1 May 2019 in Materials Science in Semiconductor Processing
We report on light-activated electroforming of ZnO/p-Si heterojunction memristors with transparent indium tin oxide as the top electrode. Light-generated electron-hole pairs in the p-type substrate are separated by the external electric field and electrons are injected into the active ZnO layer. The additional application of voltage pulses allows achieving different resistance states that end up in the realization of the low resistance state (LRS). This process requires much less voltage compared to dark conditions, thus avoiding undesired current overshoots and achieving a self-compliant device. The transport mechanisms governing each resistance state are studied and discussed. An evolution from an electrode-limited to a space charge-limited transport is observed along the electroforming process before reaching the LRS, which is ascribed to the progressive formation of conductive paths that consequently induce the growth of conductive nanofilaments through the ZnO layer.