The ultralocal model of a plant expresses the behavior of the output variable in relation to the input without requiring any specific information about the plant. Replacing the conventional model of the system with an ultralocal model can effectively improve the robustness of the model predictive control (MPC) because all types of uncertainties that correlate with the system modeling are removed in the ultralocal model. This article proposes an integral sliding mode observer (ISMO)-based ultralocal model for the finite-set model predictive current control (FS-MPCC) of an induction motor (IM). The ISMO is constructed based on the Lyapunov theory to guarantee the stability of the proposed control method. Moreover, an analytical comparison is made between the proposed ISMO and the conventional extended state observer (ESO) in the application of the ultralocal model. This comparison shows that the stability of ESO depends on the unknown term of the ultralocal model. In contrast, the stability of the proposed ISMO does not rely on any terms of the ultralocal model. Experimental tests confirm that the proposed FS-MPCC method is practically applicable to the IM drive system. Also, it improves the robustness of the predictive method against model uncertainty.
29 April 2022 in IEEE Transactions on Industrial Electronics
The parameter estimators and the disturbance observers are two widely used methods for the robustness improvement of the model predictive control schemes. This article presents a hybrid solution to improve the robustness of predictive torque control (PTC) for induction motor (IM) drive. A novel integral sliding mode observer (ISMO)-based ultralocal model and an adaptive observer are combined in the proposed method to establish a robust prediction model for the PTC. The stator current prediction model of the conventional PTC contains different parameters and variables of the IM that increase the sensitivity of the method. The proposed method solves this problem by replacing the conventional stator current prediction model with the ISMO-based ultralocal model, which does not require the IM’s parameters. On the other hand, the stator flux prediction model of the PTC just depends on the stator resistance. So, an adaptive Luenberger observer is utilized to cancel the effect of resistance variation from the stator flux prediction model. The proposed ISMO and the Luenberger observer are constructed based on the Lyapunov theory to guarantee the stability of the proposed control method. The experimental validation of the proposed method is performed. Also, the robustness of this method has been validated experimentally.
25 January 2021 in IEEE Transactions on Power Electronics
The extended state observer (ESO) has been found as an efficient solution for the model sensitivity in the model-predictive control (MPC). Generally, the ESO is used for disturbance rejection when the voltage reference is the output of the control law. The observed disturbance is subtracted from the control law. Thus, using disturbance rejection for finite-set MPC is a challenge when it is utilized by a cost function consisting of the errors of the torque and the flux. In this research, a modified disturbance rejection method is used in a feedforward shape to improve the robustness of the finite-set model-predictive torque control. In this regard, the motor parameters have not appeared in the torque prediction algorithm. Only a rough approximation of the motor parameters is needed to design the ESO, which means that the proposed method has a very low dependence on the motor parameters. Besides, a thorough tuning guideline is proposed to tune the local parameters based on the convergence analysis of the ESO by using the self-stable region approach and the Lyapunov function. The performance of the proposed MPC scheme is evaluated through simulations and experimental tests. The results of the proposed method are compared with the classic MPC results.
18 March 2020 in IEEE Transactions on Industrial Informatics
Model predictive control brings many advantages and it simplifies the control scheme in power electronics. However, tuning the weighting factor is one of the important open discussions on this topic. There are online and offline methods that have been introduced to select the weighting factor. The online methods are preferred because they are more feasible. In this paper, an online weighting factor optimization method based on the simulated annealing algorithm is proposed. The energy of the ripple is used as a convergence criterion. The presented method can be converged in a few steps and it does not impose cumbersome computations. Therefore, the optimal voltage will be identical for a range of the weighting factor. Furthermore, the used search algorithm is parameter independent. The proposed method is implemented for an induction motor but it is also applicable for other applications. The proposed method is validated by experimental tests.
8 October 2019 in IEEE Transactions on Industrial Electronics
Finite control set model predictive control (FCS-MPC) methods without using a weighting factor is being investigated as the state of the art in power electronics application. In this paper, a very simple and fast technique is proposed for making the decision among the possible options. The proposed method is an amendment on the sequential predictive control. The amendment is based on understanding the importance of the torque and the flux criteria in each control interval. The criterion that results in less cross-error will be used for voltage vectors (VVs) selection. Therefore, the high sequence may switch between the torque and the flux errors in every control interval. With this method, the best option can be found without using the weighting factor. The main advantage is avoiding the selection of an option with a big cross-error (definitely non-optimum option). While that selection is possible by the fixed sequence method. Although, simplicity and fast computation will also be achieved. The proposed method is verified by experimental tests in different operating conditions.