Hongzhe Wang

Hongzhe Wang

Auto-generated profile, based on publicly available information

Hongzhe Wang

State Key Laboratory of High Density Electrical Energy Conversion, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HWHui Wu
Hui Wu
CGChun Gan
Chun Gan
HWHongzhe Wang
Hongzhe Wang
SWShuanghong Wang
Shuanghong Wang
RQRonghai Qu
Ronghai Qu
XLXingzhong Liu
Xingzhong Liu
This article proposes an optimal active disturbance rejection control (ADRC) strategy for permanent-magnet synchronous motors (PMSMs), to improve the speed performance under periodic and aperiodic disturbances. First, the speed harmonics and the weakness of conventional linear ADRC are analyzed, and the disturbance rejection ability is found to be degraded due to the limited bandwidth of the extended state observer (ESO). To enhance the disturbance rejection ability, a novel double-stage-ESO (2S-ESO) is proposed, which integrates the advantages of both cascaded-ESO and the quasi-resonant controller. In the proposed control scheme, 2S-ESO works through two stages where the cascaded structure is adopted to realize an increase in the numerator order of disturbance estimation error transfer function, and the estimation accuracy is improved. Meanwhile, a composite ESO embedded with the quasi-resonant controller is designed in the second stage, where accurate estimation and attenuation of the periodic disturbance can be achieved. Compared with the existing ADRC technique, both the dynamic response and steady-state accuracy with the proposed method are greatly improved, and strong robustness is also maintained. Experiments are carried out to validate the effectiveness of the proposed scheme.

27 September 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HWHongzhe Wang
Hongzhe Wang
CGChun Gan
Chun Gan
Kai NiKai Ni
Kai Ni
ZYZhiyue Yu
Zhiyue Yu
RQRonghai Qu
Ronghai Qu
This article proposes a virtual current constraint based segmented trajectory control strategy for surface-mounted permanent-magnet synchronous motor drives, to improve the transient performance under the flux-weakening operation. In the conventional scheme, the operating points (OPs) are arranged on the current constraint circle during the speed-rising process to provide the maximum electromagnetic torque. After the target speed is reached, there still exists an inevitable transition process that moves OP from the current constraint circle to the steady-state operating point (SSOP), leading to the speed overshoot, oscillation, and prolonged settling time. To solve this issue, a variable virtual current constraint is proposed to replace the fixed one. Based on the developed virtual current constraint, a novel operating point trajectory is designed, where SSOP and the target speed can be reached simultaneously without extra transition processes. Furthermore, to generate the virtual current constraint, a dual-variable based constraint method is put forward and applied to the output limitation of the speed controller. Compared to the conventional schemes, the transient performance can be significantly improved, where the speed overshoot and oscillation are eliminated, and the settling time is greatly shortened. Simulations and experiments are carried out to validate the effectiveness of the proposed scheme.

10 February 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HWHongzhe Wang
Hongzhe Wang
CGChun Gan
Chun Gan
Chong ZhangChong Zhang
Chong Zhang
HRHaotian Ren
Haotian Ren
RQRonghai Qu
Ronghai Qu
Aiming to enhance the robustness and transient performance under model parameter mismatch, this article proposes a self-tuning incremental model-based predictive current control (STIM-PCC) strategy for permanent-magnet synchronous motor drives. In conventional incremental predictive current control scheme, although parameters such as permanent magnetic flux linkage and stator resistance are not required, stator inductance is still necessary for the predictive model. When the stator inductance mismatch occurs, prediction error is inevitable, leading to weakened robustness and deteriorated performance. To solve this issue, a novel STIM-PCC strategy is proposed, where the prediction error that indicates the inductance mismatch is adopted to tune the nominal inductance. In this way, the incremental model is updated adaptively and the precise predictive control can be achieved. Moreover, to enhance the tuning accuracy in the overmodulation region, a voltage constraint compensation method is put forward, which can effectively reduce the current drop during dynamic process. Compared to conventional scheme, the parameter robustness is significantly strengthened, where the inductance mismatch can be detected and corrected in time. Besides, not only the current fluctuation is reduced, but the settling time is shortened, thus greatly improving the transient performance. Experiments are carried out to validate the effectiveness of the proposed scheme.

28 October 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
Chong ZhangChong Zhang
Chong Zhang
CGChun Gan
Chun Gan
HWHongzhe Wang
Hongzhe Wang
HRHaotian Ren
Haotian Ren
RQRonghai Qu
Ronghai Qu
When encountering the single-phase open-circuit fault, the open-winding permanent magnet synchronous motor (OW-PMSM) drive can automatically switch to the two-phase operation due to the inherent fault-tolerant ability. However, the inevitable zero sequence current of fundamental frequency interacts with the third-order back electromotive force, resulting in severe torque ripple. Accordingly, the system performance and the output quality are therefore degraded. In addition, after the current in the faulty phase rapidly decays to 0, the corresponding two power legs lose their regulating ability to the current. This makes the phase current reconstruction strategy for normal operation unavailable in the post-fault operation. In this paper, a novel torque ripple suppression scheme is put forward for the OW-PMSM drive with open-phase fault. The proposed method coordinates multiple high-order torque harmonics by injecting the harmonic current of only a single frequency, which establishes two methods for torque ripple optimization. Moreover, the phase current reconstruction scheme is modified to make it compatible not only with the post-fault operation, but the torque ripple optimization strategy as well. Finally, experimental verification is carried out on an OW-PMSM drive to prove the feasibility and effectiveness of the proposed strategy.

9 May 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
XZXudong Zhang
Xudong Zhang
ZQZhang Qinghu
Zhang Qinghu
DMDan Mei
Dan Mei
CTChenghuan Tian
Chenghuan Tian
HWHongzhe Wang
Hongzhe Wang
CGChun Gan
Chun Gan
Parallel interleaved three-level inverters (PITIs) are much appreciated in flywheel energy storage systems (FESS), for their great reliability and efficiency. However, the subsequent circulating currents generated by the common-dc-link and asynchronous carriers can lead to excessive harmonic distortion and power losses. To solve this issue, a multiobjective optimization based pulse-width modulation (MOOPWM) scheme is proposed in this article. First, a multiconstraint vector preselection criterion is developed to reconcile the targets such as eliminating circulating currents, diminishing common-mode voltage (CMV) amplitude, and executing the nearest equilateral/isosceles vector synthesis. On this basis, the optimal vector set is determined. Then, a novel carrier-based implementation strategy is developed to synthesize the above optimal vectors set of MOOPWM. The implementation strategy incorporates smooth segmented compensation to the reference signal alongside a nonclamping phase carrier exchange algorithm, which conducts the modulation with lower computational cost. Compared with existing modulation schemes, a simultaneous reduction of circulating currents, CMV and switching loss can be achieved with the proposed MOOPWM. Finally, comparative simulations and experiments on a 300-kW PITI fed FESS motor are carried out to validate the effectiveness of the proposed scheme.

30 April 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HWHongzhe Wang
Hongzhe Wang
CGChun Gan
Chun Gan
HRHaotian Ren
Haotian Ren
Chong ZhangChong Zhang
Chong Zhang
XSXinzheng Shan
Xinzheng Shan
RQRonghai Qu
Ronghai Qu
In deadbeat predictive current control scheme, the input-delay arising from the signal conditioning circuit (SCC) in current measurement will lead to predictive error and control performance deterioration. In this letter, first, the input-delay issue is detailly analyzed. Then, to solve it, the input-delay is identified by the use of frequency characteristic of SCC. On this basis, a novel phase-shift sampling method is put forward to substantially compensate for the input-delay. When adopting this strategy, current control performance can be significantly enhanced without any pattern judgments or complex calculations. Finally, experiments are performed to verify the effectiveness of the proposed strategy.