20 November 2024 in Materials Today Physics
11 September 2017 in IEEE Transactions on Device and Materials Reliability
The electrical and structural properties of hafnium oxide (HfO2) received by ultra violet (UV)-stimulated plasma anodizing were investigated. The plasma anodizing process is carried out at a relatively low temperature (400 °C) and distinguished as a clean, vacuum, and easy process. With this technology in 5–10 min the result is a 50–100-nm thickness oxide layer. Our experiments used Hafnium as a metal deposited onto a silicon substrate and following oxidation by plasma anodization. The growing speed of HfO2 was high when the UV lamp was turned on, and grown without the UV stimulation, the process efficiency was low. Electrical properties were characterized by capacitance–voltage (CV) technic and were calculated with a dielectric constant ( $\boldsymbol {\varepsilon =18.5}$ ), flatband voltage, threshold voltage, bulk potential, work function, oxide effective charge, and charge concentration. ${I}$ – ${V}$ characterization revealed negligible leakage current. The ${C}$ – ${V}$ and ${I}$ – ${V}$ measurements were carried out on a Keithley Instrument—Semiconductor Parameter Analyzer 4200-SCS and oxide thickness was measured by a reflectometer—MprobeVis System. X-ray photoelectron spectroscopy showed elemental analysis of the oxide and from the data was calculated ratio of the Hf/O. X-ray diffraction showed high quality of the crystal structure of the hafnium oxide.
18 October 2016 in IOP Conference Series: Earth and Environmental Science
In this report we consider HfO2 dielectric layer received by UV stimulated plasma anodizing. This dielectric is distinguished by good electric parameters. For this purpose, it was used C-V characterization technic and calculate dielectric constant, flatband voltage, thrishold voltage, bulk potential, work function, oxide effective charge, charge concentration. The C-V measurement was carried out on Keithley Instrument-Semiconductor Parameter Analyzer 4200, oxide thickness was measured by reflectometer-MprobeVis System.
1 December 2020 in IOP Conference Series: Earth and Environmental Science
Modern technologies for creating integrated circuit elements offer many innovations, both in terms of the technological cycle and the introduction of new technologies. Stimulated processes in this regard and their mechanism require a thorough study in order to further improve the technology and the parameters of the micro and nano devices made on their basis. We have studied the processes stimulated by ultraviolet radiation, such as Stimulated Plasma Anodizing and Stimulated Magnetron Sputtering. In the study of stimulated mechanism should be considered processes which are going on with ultraviolet irradiation on the sample and plasma. In these processes, the UV light effects on the plasma, on the surface of the synthesized material, its volume, and the interface area of the material. In particular, in the case of plasma anodizing, UV radiation: 1) produces ozone in the plasma that is much more active than oxygen ion. 2) Ionizes interface area of Plasma-oxide, producing additional current carriers, and 3) transferring electrons from the oxidized material bond zone to the anti-bond zone, thereby weakening the bond strength between the oxide atoms. Because of these effects, the process of mixing anions and cations is facilitated and, consequently, the oxygen diffusion coefficient is increased and the oxidation process is accelerated. At the oxide-semiconductor interface happens roasting existing charge trapping levels, which reduces the concentration of charge carriers and improves the oxide parameters. The same processes are observed in the case of Magnetron Sputtering. In the deposited layer excites mechanical tensions and it can be removed by UV irradiation in the same way as in the case of plasma anodizing.
19 October 2016 in IOP Conference Series: Earth and Environmental Science
In this paper we offer low temperature technology receiving GaAs oxide. For this purpose, we use plasma anodizing with ultraviolet irradiation. Formation native oxide of GaAs is a problem and solving this problem is a scientific challenge. This paper provides the information about the kinetic of growing GaAs oxide, measurement of C-V characteristic, analysis of XPS spectra and Auger Spectroscopy, the distribution profiles of oxygen, Gallium and Arsenide in the total oxide, surface roughness and state density dependence on the anodizing current.