13 March 2020 in IEEE Access
Continuous emission monitoring system (CEMS) is widely used in the field of environmental protection, but the maintenance routines of it consist mostly of pre-defined activities. Reliability-centered maintenance (RCM) uses a systematic approach to develop maintenance strategies that take into account factors such as system life, operating efficiency, and maintenance cost-effectiveness. This paper is motivated to apply RCM to sampling subsystem in CEMS. Based on the failure mode and effect analysis (FMEA), the RCM logic decision used to identify the reasonable maintenance mode is implemented. Subsequently, an average availability model is proposed to determine the maintenance interval cycle. Finally, the maintenance outline is formed, which can be then further used as valuable information to improve equipment reliability and develop maintenance strategies.
25 April 2026 in Computer Graphics Forum
The abstraction of 3D objects with simple geometric primitives like cuboids allows us to infer structural information from complex geometry. It is important for 3D shape understanding, structural analysis and geometric modeling. We introduce a novel fine‐to‐coarse self‐supervised learning approach to abstract collections of 3D shapes. Our architectural design allows us to reduce the number of primitives from hundreds (fine reconstruction) to only a few (coarse abstraction) during training. This allows our network to optimize the reconstruction error and adhere to a user‐specified number of primitives per shape while simultaneously learning a consistent structure across the whole collection of data. We achieve this through our abstraction loss formulation which increasingly penalizes redundant primitives. Furthermore, we introduce a reconstruction loss formulation to account not only for surface approximation but also volume preservation. Combining both contributions allows us to represent 3D shapes more precisely with fewer cuboid primitives than previous work. We evaluate our method on collections of man‐made and humanoid shapes comparing with previous state‐of‐the‐art learning methods on commonly used benchmarks. Our results confirm an improvement over previous cuboid‐based shape abstraction techniques. Furthermore, we demonstrate our cuboid abstraction in downstream tasks like clustering, retrieval, and partial symmetry detection.