1 February 2021 in International Journal of Structural Integrity
Purpose: Gas pipelines are facing serious risk because of the factors such as long service life, complex working condition and most importantly, corrosion. As one of the main failure reasons of gas pipeline, corrosion poses a great threat to its stable operation. Therefore, it is necessary to analyze the reliability of gas pipelines with corrosion defect. This paper uses the corresponding methods to predict the residual strength and residual life of pipelines.Design/methodology/approach: In this paper, ASME-B31G revised criteria and finite element numerical analysis software are used to analyze the reliability of a special dangerous section of a gas gathering pipeline, and the failure pressure and stress concentration of the pipeline under three failure criteria are obtained. Furthermore, combined with the predicted corrosion rate of the pipeline, the residual service life of the pipeline is calculated.Findings: This paper verifies the feasibility of ASME-B31G revised criteria and finite element numerical analysis methods for reliability analysis of gas pipelines with corrosion defect. According to the calculation results, the maximum safe internal pressure of the pipeline is 9.53 Mpa, and the residual life of the pipeline under the current operating pressure is 38.41 years, meeting the requirements of safe and reliable operation.Originality/value: The analysis methods and analysis results provide reference basis for the reliability analysis of corroded pipelines, which is of great practical engineering value for the safe and stable operation of natural gas pipelines.
13 March 2020 in IEEE Access
Continuous emission monitoring system (CEMS) is widely used in the field of environmental protection, but the maintenance routines of it consist mostly of pre-defined activities. Reliability-centered maintenance (RCM) uses a systematic approach to develop maintenance strategies that take into account factors such as system life, operating efficiency, and maintenance cost-effectiveness. This paper is motivated to apply RCM to sampling subsystem in CEMS. Based on the failure mode and effect analysis (FMEA), the RCM logic decision used to identify the reasonable maintenance mode is implemented. Subsequently, an average availability model is proposed to determine the maintenance interval cycle. Finally, the maintenance outline is formed, which can be then further used as valuable information to improve equipment reliability and develop maintenance strategies.