In this Letter, we report gate leakage suppression in p-GaN/AlGaN p-channel transistors enabled by a transferred boron nitride (BN) gate dielectric for high-temperature operation. To elucidate the impact of BN integration, we systematically compare transfer characteristics, transconductance, and related metrics as functions of temperature (25–300 °C) for BN and conventional Schottky gate devices. Notably, current density in the BN device remains stable above ∼3 mA/mm at 300 °C, with an on/off ratio >103 and ID, max × LDS reaching ∼47 μA. At the same time, both the threshold voltage shift and the subthreshold slope show minimal variation, highlighting the excellent stability of this device. These results can provide insight into design strategies for high-temperature p-GaN p-channel transistors.
1 October 2026 in Semiconductor Science and Technology
A compact analytical–numerical framework is developed for drift-region design in quasi-vertical gallium nitride (GaN) trench metal–oxide–semiconductor field-effect transistors. The forward model combines finite-thickness electrostatics, an equivalent fixed-charge correction, GaN avalanche ionization, and trench-to-drift current spreading. Four fixed-thickness structures first verify the field regime, breakdown voltage, and specific on-resistance against two-dimensional technology computer-aided design (TCAD), with maximum deviations of 1.42% for breakdown voltage and 2.7% for specific on-resistance. The model is then embedded in an inverse search that selects the drift doping and thickness maximizing the Baliga figure of merit within a nominal voltage window. A subsequent same-structure robustness check over 37 unique TCAD cases spanning 772–2639 V gives mean absolute percentage errors of 4.1% for breakdown voltage and 6.6% for specific on-resistance. The optimized trajectory is reduced to compact power-law expressions with maximum fitting errors below 4.6%. These platform-specific relations provide a traceable first-pass design tool before multidimensional TCAD refinement and fabrication.
We report high-performance GaN p-channel MOSFETs enabled by atomic layer deposited (ALD) Ga2O3 as a high-k gate dielectric. The devices achieve a high Baliga's figure of merit of 0.43 MW/cm2 with a breakdown voltage exceeding 200 V. Minimal hysteresis (<100 mV) is observed in both I–V and C–V characteristics, indicating a high-quality Ga2O3/p-GaN interface with a low interface trapped charge density. Material characterization confirms the formation of a dense and uniform Ga2O3 dielectric with excellent interfacial integrity. The devices exhibit well-defined transfer and output characteristics with clear pinch-off and stable off-state leakage. Post-breakdown analysis and TCAD simulations reveal that electric-field crowding at the gate edge governs device failure. These results establish ALD Ga2O3 as a promising gate dielectric for high-voltage GaN complementary power electronics.