1 February 2019 in Electric Power Systems Research
17 June 2019 in IEEE Transactions on Reliability
12 July 2019 in IEEE Transactions on Power Delivery
Considering the reactive power compensation and harmonic performance evaluation, the reliability model of the AC filter (ACF) in the Ultra High-Voltage Direct-Current link is newly proposed. The state space models of the filters are combined by matrix description to obtain the transfer rates among the states which represent the configuration schemes, i.e. the type and number of the available filters. The sensitivity model of the combined ACF subsystem is proposed to find out the weakest filter. Due to the failure of the filters, both the lack of reactive power compensation and the harmonic current which exceed the limit, cause the loss of the transmission capacity. The fundamental and harmonic power flow models are proposed to quantify the compensated reactive power and evaluate the harmonic indices, by which the configuration schemes are grouped with the capacity levels (CLs) of the transmitted power and regrouped to satisfy the harmonic standards. The numerical results demonstrate that the transitions among 100% CL, 75% CL, and 50% CL to 0% CL are appeared due to the configuration schemes which grouped by the reactive power compensation but not satisfying the harmonic standards are removed to the group of 0% CL.
9 January 2019 in IET Generation, Transmission & Distribution
In this study, a sensitivity‐based optimal reliability design (ORD) model of the AC/UHVDC (ultra‐high‐voltage DC) system is proposed. The model can be used to adjust the reliability parameters of the replaceable AC equipments and UHVDC components to satisfy the pre‐specified system reliability while minimising the total cost. The corresponding sensitivities provide references to identify the non‐coherency equipments and to adjust the reliability parameters while avoiding the repeated calculation of the system reliability. To realise the proposed ORD model, the optimal power flow model considering the unbalanced operation mode of the UHVDC is proposed, and the incremental transition rate of the UHVDC is derived, thus to quantify the system reliability indices. Combined with the sensitivity model of the UHVDC itself, the state probability is used to connect the reliability indices at the system level and the UHVDC components’ parameters, obtaining a direct solution of the corresponding sensitivities. The numerical results based on the modified IEEE reliability test system (RTS) test system are provided to validate the feasibility and accuracy of the proposed models.
1 August 2026 in AIP Advances
Surface flashover of the insulator triggers gas-insulated switchgear’s unpredictable failure and affects the reliability of the electrical system. However, most studies focus on material modification to reduce surface charge but fail to eliminate the electric field distortion caused by insulator geometry effects. To reduce the structural distortion and improve the AC flashover voltage of the insulator, functional gradient coatings are designed onto the epoxy spacer, coating layer parameters affecting electric field distortion are analyzed, and partial discharge and AC flashover measurements are conducted to verify the design rationality. It indicates that the surface electric field becomes uniform with increasing permittivity, number of layers, thickness, and reasonable height design. Then, a three-layer functional gradient scheme is fabricated onto an epoxy spacer with 0.5 mm coating thickness: 50 wt. % EP/BaTiO3–0.6 mm (height), 40 wt. % EP/BaTiO3–1.1 mm, and 30 wt. % EP/BaTiO3–13.3 mm. The maximum electric field of the design decreases by 54.06% compared to the uncoated sample, and the partial discharge frequency and quantity decrease. The AC surface flashover increases by 17.62% compared to the uncoated spacer, indicating the design effectively reduces field distortion. The findings lay a fundamental foundation for future advanced functional gradient material designs to regulate electric fields for other engineering applications.