Momentum wheel is the main execution unit for the attitude control of three-axis stabilized satellite. On the long-life satellites, momentum wheels are often required working stably and reliably for several years or even ten years. It is necessary to evaluate the remaining life of on-orbit satellite momentum wheel. The failure mechanism of momentum wheel is very complex and it is difficult to predict its long-range performance with trend extrapolation method. Data-driven prognostic is combined with similitude method to predict the remaining life of momentum wheel. The causes of the momentum wheel failure are analyzed to select key parameters to indicate life characteristics of momentum wheel. The lifetime performance data of some other momentum wheels failed are used to train neural network models to describe the degradation process of similar momentum wheels, which is used for predicting momentum wheel on-orbit. In the case study, this method showed a good performance. It is more applicable than trend extrapolation and has much better performance.
1 October 2021 in IOP Conference Series: Earth and Environmental Science
Taking a liquid slag pulverized coal burner as the research object, the combustion characteristics of the burner in different high temperature secondary air were simulated by Fluent commercial software, and the combustion characteristics of temperature field distribution and the change of component concentration were obtained. The simulation results show that the burner can form a front ignition zone, the air vortex low temperature zone, the central DC flame and the annular flame in the hot state. It can be found that increasing the secondary air temperature can improve the combustion intensity of the burner, promote the formation of CO, and form a high temperature reduction zone, which is conducive to inhibiting pollutant emissions. The research results provide theoretical support for the application of the burner in practice.
In view of the need for professional test sites, precision and expensive test equipment, and corresponding experimental operation processes for automobile testing, some universities cannot meet these requirements at present. Through the use of virtual simulation software, part of the teaching of automobile testing is realized to meet the teaching requirements. Based on ANSYS software, the college can understand the dynamic characteristics and reliability tests for automobile parts. Based on ADAMS software, the college can understand the motion simulation of automobile parts. The research results show that, based on computer simulation technology, the virtual experiment teaching solution of automobile testing course is proposed.