15 February 2025 in Neft i Gaz
KUKazakh-British Technical University
Kazakh-British Technical University
This paper presents a comparative analysis of percussion-hydraulic systems aimed at optimizing the multilateral drilling process. The research focuses on evaluating the effectiveness of hydraulic pulse interaction systems in horizontal and directional well drilling, addressing the inherent limitations of traditional drilling techniques where the absence of sufficient static load reduces penetration rates. The study investigates the potential of hydraulic percussion tools to improve drilling speed, enhance borehole stability, and mitigate operational issues typically encountered in low-permeability and vertically fractured reservoirs. Key design parameters of hydraulic pulse systems, including curvature radius, axial loads, and wellbore trajectory profiles, are examined to ensure precise directional control and efficient rock destruction. Advanced mathematical models are employed to optimize parameters such as pulse frequency, impact energy, and crown rotation speed. The integration of rotary-impact techniques alongside traditional methods is explored to address challenges in drilling complex geologic formations. Furthermore, the paper proposes novel improvements to existing hydraulic systems, including enhanced spring configurations that ensure tool operation even in cases of partial spring failure. Comparative analyses with technologies such as Baker Hughes' AutoTrak and Sperry-Sun's GeoPilot illustrate the advantages and limitations of percussion-hydraulic systems in practical applications. The research concludes that the adoption of these systems significantly improves drilling efficiency, reduces costs, and enables effective multilateral well construction under challenging conditions. This study's outcomes are expected to contribute to the further development of drilling technologies in Kazakhstan and other oil-producing regions, offering promising prospects for commercialization and practical implementation.
15 February 2024 in Neft i Gaz
KUKazakh-British Technical University
Kazakh-British Technical University
+1
This article examines the features of drilling horizontal wells with gas-liquid shock-ejector shells in difficult mining and geological conditions, namely in boulder-pebble deposits. The technology of drilling large boulders is considered. In addition, to study the processes of energy transfer and shock pulses from the drilling shell to the bottom of the well during the sinking of boulders, the authors conducted appropriate theoretical studies and provided calculations of the stages of the introduction of the tool into the rock. Based on theoretical studies, drilling analysis, calculations of the dependence of boulder movements, several conclusions were obtained on the technology of drilling wells in boulder-nut deposits.
15 December 2023 in Neft i Gaz
KUKAZAKH-BRITISH TECHNICAL UNIVERSITY
KAZAKH-BRITISH TECHNICAL UNIVERSITY
+1
This article is devoted to the study of the process of crack formation in rocks during hydraulic hammer drilling. Analysis of the manifestation of cracks in rocks during hydraulic percussion drilling is a key aspect of research aimed at the optimization and efficiency of this drilling method. The article presents a comprehensive analysis of the mechanisms of crack formation in rocks under the influence of hydraulic shock waves, identifying factors influencing their development and propagation. The work highlights the basic principles and mechanisms of hydraulic percussion drilling, and also analyzes the factors influencing the formation of cracks in rocks during this drilling method. In addition, various parameters such as water pressure, impact velocity, tool type and rock characteristics are considered and their influence on fracture formation. The paper presents numerical modeling and calculation methods used to analyze the factors influencing the formation of cracks during well drilling. Basic parameters are considered, such as well depth, type of drilling equipment used, physical and mechanical properties of the rock, drilling fluid pressure and others. Examples of numerical calculations and modeling are given, as well as an assessment of the influence of various factors on the formation of cracks in rock. The purpose of this article is to summarize current information on the formation of cracks during the hydraulic percussion drilling method. The scientific significance of this study lies in the possibility of predicting and controlling the formation of cracks during hydraulic drilling, which contributes to more efficient use of resources and improved drilling safety. The results obtained can be used in the practice of geological exploration and mining work to optimize drilling processes and improve the quality of mineral extraction. Understanding the processes of formation of cracks in rocks with this drilling method will allow optimizing its use, improving control over the process and ensuring more efficient and safe extraction of minerals from the bowels of the earth.
30 October 2024 in Neft i Gaz
The article explores the potential of CO2 injection technology for enhanced oil recovery (EOR) and simultaneous reduction of carbon emissions through storage in oil reservoirs and aquifers. The study focuses on 23 oil fields on the Norwegian Continental Shelf, identified as promising candidates for implementing this technology. The model used in the research assesses the economic and technical feasibility of CO2 injection, along with the integration of EOR and long-term carbon storage. The primary goal is to demonstrate that injecting 70 million tons of CO2 annually over 40 years can result in an additional oil recovery of 5.9%-7.6% of the original oil in place, equivalent to 276-351 million cubic meters. Excess CO2 can be stored in aquifers, further contributing to the reduction of carbon emissions. The article outlines key aspects of the study, including economic and technical parameters, such as costs associated with CO2 transportation, storage, and drilling of new wells, as well as various oil and CO2 price scenarios. The environmental benefits of the project are highlighted, showing that the significant CO2 retained in oil reservoirs and aquifers compensates for emissions from the combustion of recovered oil. The study also discusses the features of the model, including scenarios for continuous CO2 injection and considerations of infrastructure costs. The article emphasizes the importance of developing and implementing such projects in the context of global climate change mitigation efforts and points to the significant potential of CO2 injection technology for the oil industry. The aim of this article is to evaluate the feasibility and potential benefits of large-scale CO2 injection for enhanced oil recovery (EOR) and long-term carbon storage in oil fields and aquifers. The study seeks to demonstrate how CO2 injection can increase oil recovery rates while simultaneously reducing carbon emissions, providing a comprehensive technical-economic assessment of the process. Through the analysis of 23 oil fields on the Norwegian Continental Shelf, the article aims to present the economic, environmental, and operational advantages of integrating CO2 storage with EOR operations.
24 June 2025 in Gospodarka Surowcami Mineralnymi - Mineral Resources Management
Niniejsze analiza bada skuteczność różnych typów polimerów, w tym polimerów modyfikowanych hydrofobowo, polisacharydów i syntetycznych poliakrylamidów, w zwiększaniu odzysku ropy naftowej i zmniejszaniu wpływu na środowisko. Celem tych badań jest kompleksowa ocena skuteczności składów polimerów w technologiach korygujących przepływ w produkcji ropy naftowej. Badania eksperymentalne przeprowadzone na Uniwersytecie Satbayeva w 2024 r. oceniały roztwory polimerów w symulowanych warunkach złoża o wysokiej temperaturze i wysokim zasoleniu, badając ich potencjał w zakresie poprawy lepkości cieczy, kontrolowania procesów filtracji i optymalizacji ekstrakcji węglowodorów. Badania ujawniły znaczące zalety technologiczne kompozycji polimerowych, wykazując ich zdolność do tworzenia stabilnych emulsji, zmniejszania odzysku wody i poprawy profili wypierania ropy. Polimery modyfikowane hydrofobowo zwiększyły lepkość płynu złożowego o 30%, podczas gdy syntetyczne poliakrylamidy wykazały niezwykłą zdolność adaptacji do różnych warunków geologicznych. Analiza ekonomiczna wskazała, że technologie polimerowe mogą zwiększyć wydobycie ropy o około 43% bez konieczności dodatkowego wiercenia odwiertów, co zmniejsza nakłady inwestycyjne. Pomimo wyzwań związanych ze stabilnością temperatury i względami ekonomicznymi, badanie stwierdza, że kompozycje polimerowe stanowią obiecującą strategię zrównoważonej i wydajnej produkcji ropy, oferując elastyczność technologiczną i lepsze zarządzanie zasobami.
30 June 2025 in Neft i Gaz
KUKazakh-British Technical University
Kazakh-British Technical University
This study examines the use of miscible gas injection for Enhanced Oil Recovery (EOR) in Field “X” in comparison to sour gas injection (SGI) and chemical flooding alternatives. The goal is to determine which EOR method offers the best combination of technical effectiveness and economic feasibility. A static geological model of Field X was developed using Schlumberger Petrel and reservoir simulations (covering primary, secondary, and tertiary recovery stages) were run in the INTERSECT simulator. The simulations indicate that miscible gas injections markedly increase hydrocarbon recovery while keeping costs low. An economic evaluation (considering capital and operating costs and net present value) revealed that reinjecting sour gas yields the highest NPV, primarily due to its minimal operating expenses. In contrast, chemical EOR techniques – specifically alkaline–surfactant–polymer (ASP) flooding and polymer-alternating-water (PAW) injection – delivered only marginal additional oil recovery, which is not economically viable given their high chemical costs.