15 December 2023 in Neft i Gaz
KUKAZAKH-BRITISH TECHNICAL UNIVERSITY
KAZAKH-BRITISH TECHNICAL UNIVERSITY
+1
This article is devoted to the study of the process of crack formation in rocks during hydraulic hammer drilling. Analysis of the manifestation of cracks in rocks during hydraulic percussion drilling is a key aspect of research aimed at the optimization and efficiency of this drilling method. The article presents a comprehensive analysis of the mechanisms of crack formation in rocks under the influence of hydraulic shock waves, identifying factors influencing their development and propagation. The work highlights the basic principles and mechanisms of hydraulic percussion drilling, and also analyzes the factors influencing the formation of cracks in rocks during this drilling method. In addition, various parameters such as water pressure, impact velocity, tool type and rock characteristics are considered and their influence on fracture formation. The paper presents numerical modeling and calculation methods used to analyze the factors influencing the formation of cracks during well drilling. Basic parameters are considered, such as well depth, type of drilling equipment used, physical and mechanical properties of the rock, drilling fluid pressure and others. Examples of numerical calculations and modeling are given, as well as an assessment of the influence of various factors on the formation of cracks in rock. The purpose of this article is to summarize current information on the formation of cracks during the hydraulic percussion drilling method. The scientific significance of this study lies in the possibility of predicting and controlling the formation of cracks during hydraulic drilling, which contributes to more efficient use of resources and improved drilling safety. The results obtained can be used in the practice of geological exploration and mining work to optimize drilling processes and improve the quality of mineral extraction. Understanding the processes of formation of cracks in rocks with this drilling method will allow optimizing its use, improving control over the process and ensuring more efficient and safe extraction of minerals from the bowels of the earth.
15 February 2024 in Neft i Gaz
The drill bit in the oil and gas industry plays a key role in the drilling process, but its operation in the field, filled with difficulties and dangers, emphasizes the need for careful study of its behavior. This equipment, which is the head of the well, is forced to face various challenges during drilling, where danger can await at every step. However, special attention should be paid to those cases when the drill bit collides with crumbling rocks. In conditions of high pressure and friction associated with drilling, the drill bit is subjected to significant loads. These conditions can lead to damage and breakage of equipment, which in turn creates additional risks for workers on site. Understanding the behavior of a drill bit in crumbling rock is becoming an extremely important aspect to ensure the efficiency and safety of field work. The analysis of the technical characteristics and mechanisms of the impact of the drill bit on crumbling rocks makes it possible to develop more reliable and durable tools capable of withstanding extreme conditions. This, in turn, increases drilling efficiency, reduces the risk of industrial accidents and ensures safer working conditions in the oil and gas industry.
15 February 2024 in Neft i Gaz
In recent years, one of the trends in oil well production has been the continuous growth of interest in intelligent monitoring and control systems for mechanized well assets. This is attributed, on one hand, to the increasing number of oil fields worldwide reaching maturity and the development of new challenging reservoirs (in terms of viscosity, water cut, and sand production). On the other hand, it is driven by the necessity to enhance the economic efficiency of oil production, including cost reduction and minimizing losses. The emergence of «smart» oil production technologies, such as programmable drives for well pumps, also contributes significantly to addressing these issues. Their application allows for increased reliability and lifespan of pump equipment, reduced well downtime and failures, prevention of negative scenarios during oil production, and facilitates the visualization of parameters in a user-friendly manner. Despite the widespread use of digital technologies in the oil and gas industry, there is still significant potential for further digitization to expand operations for enhanced safety and productivity. This article presents the experience of creating and testing such a control station for screw pump units at an oil field.
30 August 2026 in Neft i Gaz
The paper presents the results of research aimed at improving the efficiency of spent drilling fluid utilization generated during the drilling of technological wells. The main objective of the study is to reduce the volume of generated sludge through efficient separation of solid and liquid phases and the reuse of separation products within the production cycle. The influence of hydrodynamic factors, including velocity gradient, treatment time, and reagent dosage, on the suspension settling process was investigated. The scientific novelty of the study lies in the use of a cylindrical hydrodynamic disperser for spent drilling fluid utilization and in determining the influence of its operating parameters on phase separation efficiency. A cylindrical-type hydrodynamic disperser providing controlled turbulent action on the suspension was developed. This ensures uniform distribution of reagents and improves particle coagulation efficiency compared to conventional designs. Laboratory studies established the optimal process parameters: velocity gradient – 1500 c-1, treatment time – 15 s, and N-300 reagent dosage – 50 g⁄(t ). Implementation of the proposed technology provides recovery of up to 80% of technical water from the solid phase, reduces the volume of generated sludge by 40–60%, and improves the environmental and resource efficiency of drilling operations.
30 August 2026 in Neft i Gaz
The paper presents the results of theoretical and hydrodynamic substantiation of shockwave stimulation parameters for dynamic near-wellbore treatment and skin-factor reduction in tight reservoirs. The study is based on actual geological and technical data from production wells No. 45 and No. 47 of the Lower Visean substage at the «Х» field. A two-dimensional axisymmetric finite element model based on the Biot-Frenkel dynamic poroelasticity theory was developed, which accounts for the radial change in fluid viscosity and density within the zone of deep invasion of heavy mud filtrate (1.90 g/cm³). Through numerical simulation, the optimal frequency range of the shock pulse (10–15 Hz) was determined. It was established that the pressure wave with an amplitude of up to 4.5 MPa generated by the hydraulic impulse system exceeds the tensile strength of the rock (σt = 2.8 MPa) and ensures the opening of a microfracture network according to Coulomb’s cubic law at a distance of up to 2.0 m from the wellbore wall at a frequency of 10 Hz. The practical significance lies in the elimination of the mud cake screen formed under high overbalance conditions during the primary disclosure of an ultra-tight formation (porosity up to 0.15%, permeability from 0.001 mD). The implementation of the proposed regimes allows for a reduction in the calculated skin factor from critical 8.8 down to 0.4–1.5, which provides a 2.4 to 3.1-fold increase in the predicted well productivity index.
30 October 2022 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. To test the theoretical provisions for calculating the geometric and gas-dynamic parameters of a hydropulse apparatus for strikers using core pipes. Methodology. The research methodology is based on the tests carried out. The tests were conducted between January 6, 2021, and April 28, 2021. The type of test is laboratory bench trials. In the course of the study, methods of synthesis and analysis of information were applied. Finding. The basic design parameters of a hydro-pulse generator capable of operating efficiently with impact machines were obtained during the bench research. The optimal scheme of air flow distribution at the exhaust of the hydraulic hammer has been established. The optimal value of the pressure drop in the operating and blocking modes of operation of the generator is determined. In addition, the optimal value of the ejection coefficient in these two modes of operation of the generator was determined. Originality. The article investigated the technologies of drilling hard rocks in order to optimise the basic geometric parameters of the hydraulic pulse generator, to distribute the working flow in front of the jet blower, to measure the value of the ejection coefficient and pressure drop to clarify the composition and methodology of experiments in borehole conditions. Practical value. The presented study can be used to optimise the drilling technology as well as a basis for training specialists in the field of hard rock drilling using hydraulic percussion technology.