Hybrid perovskite materials have considerable potential for light emitting devices such as LEDs and lasers. We combine solution processed CH3NH3PbI3 perovskite with UV nanoimprinted polymer gratings to fabricate distributed feedback (DFB) lasers. The lead acetate deposition route is shown to be an effective method for fabricating low-loss waveguides (loss coefficient ~6 cm-1) and highly compatible with the polymer grating substrates. The nanoimprinted perovskite exhibited single-mode band-edge lasing, confirmed by angle-dependent transmission measurements. Depending on the excitation pulse duration the lasing threshold shows a value of 110 μJ/cm2 under nanosecond pumping and 4 μJ/cm2 under femtosecond pumping. We demonstrate further that this laser has excellent stability with a lifetime of 108 pulses.
A visible perovskite distributed feedback laser is fabricated for the first time. Through the use of nanocrystal pinning, highly luminescent methylammonium lead bromide films are used to produce stable lasers emitting at 550 nm, with a low threshold of 6 µJcm−2. The lasers were able to support multiple polarisations, and could be switched between transverse magnetic and transverse electric mode operation through simple tuning of the distributed feedback grating period.