1 March 2015 in Brazilian Journal of Chemical Engineering
In this study polyethersulfone ultrafiltration membrane were prepared with the modifier gelatin at 0, 5, 10, 15 and 20 wt % using DMF as solvent by phase inversion process. Morphologies and characteristics of the membranes were investigated through the methods of SEM, XRD, contact angle measurements. The performance of the modified membrane for the treatment of leather and distillery wastewater through a deadend ultrafiltration process was studied. Morphological investigation showed that the 10% gelatin content in 90% PES results in a two layer structure with a porous top and homogeneous sub-layer with uniform number of pores on the surface. The pure water flux of the modified membrane increases with gelatin concentration, which results in better permeation for both leather and distillery wastewater. In addition to 80-90% reduction in BOD and COD, all modified PES UF membranes showed moderate removal of total suspended and dissolved solids, chlorides, sulphate, oil and grease, potassium, sodium and ammonical nitrogen, apart from color removal.
18 August 2026 in Scientific Reports
Solar-driven membrane distillation (SDMD) using advanced composite membranes offers promise for sustainable water purification. Here, we present an atomistic computational study of polyvinylidene fluoride (PVDF) membranes incorporating hexagonal boron nitride (BN) and tungsten nitride (WN) nanofillers to elucidate the mechanisms underlying photoinduced charge transfer and photothermal excitation. We use a hierarchical multiscale framework integrating density functional theory (DFT), time-dependent DFT perturbation theory, and classical molecular dynamics to assess the electronic, optical, and structural properties of PVDF/BN/WN composites. Our calculations reveal a dramatic narrowing of the band gap from pristine PVDF (5.41 eV) to 0.57 eV in the composite, driven by orbital hybridization and enhanced interfacial charge transfer. Low-energy optical absorption (~ 0.85 eV) associated with charge-transfer transitions and collective excitations in WN clusters, alongside broadband activity from the near-infrared to the ultraviolet, is predicted. Molecular dynamics simulations confirm structural stability and strong interfacial ordering, with realistic atomic densities and constrained polymer mobility. These findings provide quantitative insight into the interplay between nanofiller-induced electronic structure modulation and membrane stability, establishing a theoretical foundation for designing PVDF-based composite membranes for efficient solar-driven water purification and related energy applications.
23 December 2025 in Research Square
A computational approach is used to investigate interfacial electronic interaction and optical response in plasmon-assisted membranes. A combination of density functional theory (DFT), time-dependent density functional theory (TDDFT) and molecular dynamic simulation (MDS), was implemented to elucidate the PVDF membrane incorporated with boron nitride (BN) and tungsten nitride (WN) nanofillers. Existing plasmonic membrane studies do not address atomic-scale behaviour at polymer-nanofiller interactions. DFT calculation reveals that electronic band gap of PVDF is about 7.3 eV, while that of the PVDF + BN + WN composite is about 0.08 eV, these findings indicates that a pronounced narrowing of the gap and enhances the interfacial charge transfer upon introduction of BN and WN. The TDDFT-calculated optical spectrum of the PVDF + BN + WN composite shows a strong absorption peak at 5.280 eV (234.8 nm), corresponding to plasmon-like excitation in WN nanofillers. The estimated optical band gap of 1.080 eV indicates quasi-metallic behaviour with efficient low-energy photon absorption. This strong near-infrared absorption highlights the suitability of the composite for plasmon-assisted membrane distillation applications. Molecular dynamic simulation shows that BN and WN remain stably dispersed within the PVDF matrix, with persistent short-range interfacial contacts and thermally driven polymer rearrangements preserving interfacial coupling at finite temperature.