This work reports the application of an extended proper orthogonal decomposition (E-POD) procedure to multi-plane particle image velocimetry (PIV) measurements describing the evolution of laminar separation bubbles (LSBs). Measurements were performed over a flat plate installed between adjustable end-walls providing a prescribed adverse pressure gradient for two Reynolds numbers (Re = 70 000, 150 000) and free-stream turbulence intensity levels (Tu = 1.5%, 2.5%). A wall-normal and two wall-parallel measuring planes located at different distance from the wall were considered. POD was applied to the entire PIV planes as well as on their sub-domains, showing the main flow features occurring in the different regions of the LSB. Then, the application of E-POD on different plane partitions revealed the existing correlation between the main dynamics observed in the forward part of the bubble and the breakup events occurring in the reattachment region. The E-POD modes computed in the breakup region resemble streaky structures when PIV snapshots are projected onto the POD eigenvectors of the near wall plane. Otherwise, Kelvin–Helmholtz rolls dominate the E-POD modes obtained by projection of the snapshot matrices on the basis computed in the plane located far from the wall. The main scales of the coherent structures highlighted by the E-POD modes were also characterized by means of the streamwise and spanwise autocorrelation functions of E-POD filtered fields. Data in this work clearly highlight the similarity properties of the main flow features observed in LSBs once scaled with the momentum thickness of the boundary layer at the separation position.
The continuous tendency in modern aeroengine gas turbines towards reduction of blade count and ducts length may lead to aerodynamic loading increase beyond the limit of boundary layer separation. For this reason boundary layer separation control methods, up to now mostly employed in external aerodynamics, begin to be experimented in internal flows applications. The present paper reports the results of a detailed experimental study on low profile vortex generators used to control boundary layer separation on a large-scale flat plate with prescribed adverse pressure gradients. Inlet turbulent boundary layer conditions and pressure gradients are representative of aggressive turbine intermediate ducts. This activity is part of a joint European research program on Aggressive Intermediate Duct Aerodynamics (AIDA). The pressure gradients on the flat plate are generated by increasing the aperture angle of a movable wall opposite to the flat plate. To avoid separation on the movable wall, boundary layer suction is applied on it. Complementary measurements (surface static pressure distributions, surface flow visualizations by means of wall mounted tufts, instantaneous and time-averaged velocity fields in the meridional and cross-stream planes by means of Particle Image Velocimetry) have been used to survey the flow with and without vortex generators. Three different pressure gradients, which induce turbulent separation in absence of boundary layer control, were tested. Vortex generators height and location effects on separation reduction and pressure recovery increase were investigated. For the most effective VGs configurations detailed analyses of the flow field were performed, that demonstrate the effectiveness of this passive control device to control separation in diffusing ducts. Particle Image Velocimetry vector and vorticity plots illustrate the mechanisms by which the vortex generators transfer momentum towards the surface, re-energizing the near-wall flow and preserving the boundary layer from separation.
The paper analyzes losses and the loss generation mechanisms in a low-pressure turbine cascade by Proper-Orthogonal-Decomposition (POD) applied to measurements. Total pressure probes and time resolved particle image velocimetry (TR-PIV) are used to determine the flow field and performance of the blade with steady and unsteady inflow conditions varying the flow incidence. The total pressure loss co-efficient is computed by traversing two Kiel probes upstream and downstream of the cascade simultaneously. This procedure allows a very accurate estimation of the total pressure loss coefficient also in the potential flow region affected by incoming wake migration. The TR-PIV investigation concentrates on the aft portion of the suction side boundary layer downstream of peak suction. In this adverse pressure gradient region the interaction between the wake and the boundary layer is the strongest, and it leads to the largest deviation from a steady loss mechanism. POD applied to this portion of the domain provides a statistical representation of the flow oscillations by splitting the effects induced by the different dynamics. The paper also describes how POD can dissect the loss generation mechanisms by separating the contributions to the Reynolds stress tensor from the different modes. The steady condition loss generation, driven by boundary layer streaks and separation is augmented in presence of incoming wakes by the wake-boundary layer interaction and by the wake dilation mechanism. Wake migration losses have been found to be almost insensitive to incidence variation between nominal and negative (up to −9deg), while at positive incidence the losses have a steep increase due to the alteration of the wake path induced by the different loading distribution.