Counter-rotating marine current turbines demonstrate significant potential for tidal power extraction. However, existing studies neglect the critical interaction between upstream (λ1) and downstream (λ2) tip-speed ratios (TSRs) within rotating wake environments. This work systematically investigates TSR balancing strategy via coupled analytical (momentum theory with wake rotation) and numerical methods (ANSYS 2022 R1, SST k-ω turbulence model) across a broad TSR design range (λ1, λ2: 0.5–9.7). Results reveal that the rear rotor exhibits greater sensitivity to TSR changes. Contrary to conventional design paradigms, novel geometries with λ2/λ1 ≤ 1.3 can still achieve a competitive power coefficient, indicating the potential for efficient operation under such conditions and exceeding the performance of a single-rotor configuration. Analytical solutions show that momentum theory underpredicts power performance at high TSRs due to tip losses, while numerical simulations identify optimal TSR intervals, yielding a 9.3% efficiency gain over a single-rotor system. Furthermore, increasing λ1 accelerates the onset of negative torque in the rear rotor, as λ2 approaches its operational limit. This study challenges prevailing assumptions by demonstrating that rear rotor can efficiently operate at elevated TSRs (λ2/λ1) under stabilized axial induction factors, offering actionable insights for optimizing high-output marine energy systems.
Dual-rotor tidal turbines have demonstrated performance advantages over single-rotor systems; however, their optimization remains challenging due to the increased number of design variables and interactions. Existing studies often present inconsistent findings, largely constrained to specific turbine configurations, which limits their general applicability. This study addresses the need for a more unified framework by investigating the influence of axial spacing between the two rotors based on axial momentum theory. To evaluate the applicability of the simplified theoretical approach in practical settings, a numerical analysis was conducted using ANSYS-based simulations of a counter-rotating marine current turbine model. A key assumption in previous theoretical models that the pressure at the inlet of the downstream rotor equals ambient pressure is examined to see if it is necessary and how it affects the turbine's performance. The simulation results are in full agreement with the theoretical predictions. The results show that the optimal power coefficient does not necessarily occur at large axial distances between the rotors. Instead, the results show that the power coefficient improves as the projected cross-sectional diameter of the rear rotor's flow tube at front rotor location (D1int) and axial induction ratio (e1/e2) approach 0.707D and 1/3, respectively, with peak performance observed near these values. These findings can support more efficient optimization of dual-rotor systems.