Continuous deflection devices (CDDs) can safely measure pavement deflection (or other related properties) while traveling at highway speed, which reduces traffic disruption. CDD measurements are contaminated with relatively high noise levels compared to stop-and-go devices such as the Falling Weight Deflectometer. In this article, we use wavelet transform denoising to remove the noise and estimate the true deflection slope measurements obtained from the Traffic Speed Deflectometer. Results show that failure to denoise deflection slope measurements can lead to calculated Effective Structural Number values that are highly variable (unstable). Attempting to filter these highly variable measurements can lead to erroneous results. We also use wavelet transform denoising to identify localized weak spots such as those that are caused by pavement reflection cracking. Identifying weak spots with wavelets is possible because wavelets are spatially adaptive to local features. In contrast, a linear filter is not capable of adapting to local features.
3 June 2022 in Transportation Research Record: Journal of the Transportation Research Board
This paper summarizes the research efforts into and applications of the traffic speed deflectometer (TSD) that have occurred over the last 10 years in the United States (U.S.). These are divided into three main topics which are: (1) data analysis methods including data processing, calculation of indices and structural parameters, and temperature correction; (2) evaluation efforts of TSD including repeatability and comparison with the falling weight deflectometer (FWD); and (3) applications of TSD with a focus on flexible pavement management applications, although some efforts on rigid and composite pavements are mentioned. The data analysis methods reviewed are data averaging length and reporting interval, and how deflections are calculated from the measured deflection slopes. For the calculation of indices and structural parameters the following are reviewed: deflection indices that have been proposed, the effective structural number ( SNeff), and backcalculation of layer moduli. Efforts to evaluate TSD precision (or measurement standard error) are discussed. Then, some comparisons of short-term (time frame of 1 day) and long-term (time frame of 1 year) repeatability of TSD are presented. Compared with FWD, TSD and FWD generally have good correlation, although the measurement principles of the two devices are slightly different. The focus is on network-level applications of TSD, and, more specifically, efforts to include TSD measurements in the pavement management system, especially for flexible pavements applications.
This article uses the limits of agreement (LOA) method to compare the falling weight deflectometer (FWD) and the traffic speed deflectometer (TSD), two pavement structural evaluation devices. The TSD measures deflection slope, whereas the FWD measures deflection. For this reason, measurements were converted to the surface curvature index (SCI) and the base damage index (BDI), which can be obtained from each device. The SCI and BDI agreement between the two devices was then evaluated. Although the relationship between the calculated SCI and BDI using both equipments is reasonably close to the line of equality, there is a significant variation and a bias in this relationship. For example, for an average SCI or BDI value of 300 μm, the bias was 30 μm (FWD values lower than TSD values), and the LOA was 380 μm.
5 August 2019 in International Journal of Pavement Engineering
Modelling the pavement deterioration process is essential for a successful pavement management system (PMS). The pavement deterioration process is highly influenced by uncertainties related to data acquisition and condition assessment. This paper presents a novel approach for predicting a pavement deterioration index. The model builds on a negative binomial (NB) regression used to predict pavement deterioration as a function of the pavement age. Network-level pavement condition models were developed for interstate, primary, and secondary pavement road families and were compared with traditional non-linear regression models. The linear empirical Bayesian (LEB) approach was then used to improve the predictions by combining the deterioration estimated by the fitted model and the observed/measured condition recorded in the PMS. The proposed approach can improve the mean square error prediction of the next-year pavement condition by 33%, 36% and 41% for Interstate, Primary, and Secondary roads, respectively, compared with the measured pavement condition without further modelling of the pavement deterioration.
1 March 2017 in Journal of Computing in Civil Engineering
The traffic speed deflectometer (TSD) is a device used to evaluate the pavement’s structural condition. Measurements obtained from the TSD are affected by noise, which can make it hard to interpret test results. The main objective of this paper is to develop a denoising methodology to use with TSD measurements and improve pavement structural evaluation. The denoising methodology comprises a computational algorithm to identify significant features in a high-dimensional vector of observations containing white Gaussian noise. The algorithm minimizes the classification error of features in the wavelet transform domain by adaptively selecting the level at which to control the false discovery rate. When tested in a simulation study, the results of the proposed algorithm compared favorably with other state-of-the-art methods. The proposed methodology was then successfully used with TSD measurements to identify possible weak joints in a jointed concrete pavement overlaid with an asphalt layer and to calcu...